[U-Boot] [PATCH v3 4/4] dm: tpm: Every TPM drivers should depends on DM_TPM

Christophe Ricard christophe.ricard at gmail.com
Sun Sep 20 22:00:36 CEST 2015


Every TPM drivers should now depends on DM_TPM and not only TPM.

Signed-off-by: Christophe Ricard <christophe-h.ricard at st.com>
Reviewed-by: Tom Rini <trini at konsulko.com>
---

Changes in v3: None

 drivers/tpm/Kconfig | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tpm/Kconfig b/drivers/tpm/Kconfig
index ff2cdbe..3ab652c 100644
--- a/drivers/tpm/Kconfig
+++ b/drivers/tpm/Kconfig
@@ -24,7 +24,7 @@ config TPM_TIS_SANDBOX
 
 config TPM_ATMEL_TWI
 	bool "Enable Atmel TWI TPM device driver"
-	depends on TPM && DM_I2C
+	depends on DM_TPM && DM_I2C
 	help
 	  This driver supports an Atmel TPM device connected on the I2C bus.
 	  The usual tpm operations and the 'tpm' command can be used to talk
@@ -33,7 +33,7 @@ config TPM_ATMEL_TWI
 
 config TPM_TIS_INFINEON
 	bool "Enable support for Infineon SLB9635/45 TPMs on I2C"
-	depends on TPM && DM_I2C
+	depends on DM_TPM && DM_I2C
 	help
 	  This driver supports Infineon TPM devices connected on the I2C bus.
 	  The usual tpm operations and the 'tpm' command can be used to talk
@@ -57,7 +57,7 @@ config TPM_TIS_I2C_BURST_LIMITATION_LEN
 
 config TPM_TIS_LPC
 	bool "Enable support for Infineon SLB9635/45 TPMs on LPC"
-	depends on TPM && X86
+	depends on DM_TPM && X86
 	help
 	  This driver supports Infineon TPM devices connected on the I2C bus.
 	  The usual tpm operations and the 'tpm' command can be used to talk
-- 
2.1.4



More information about the U-Boot mailing list