[U-Boot] [PATCH v4 1/2] usb: zynqmp: Add XHCI driver support

[Simon Glass]

Hi,

On 4 September 2015 at 00:31, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Added USB XHCI driver support for zynqmp.
>
> Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
> ---
> Changes for v4:
> - Added sanity check for index as per
>   review comment
> Changes for v3:
> - Decreased the phy reset delay to 10 micro secs
> - Defined base addresses in board config file as
>   per review comment.
> Changes for v2:
> - Moved all from xhci-zynqmp.h to .c file as
>   per review comment
> - Removed ad-hoc function zynqmp_xhci_core_exit()
>   as per review comment
> ---
>  drivers/usb/host/Makefile          |    1 +
>  drivers/usb/host/xhci-zynqmp.c     |  148 ++++++++++++++++++++++++++++++++++++
>  include/configs/xilinx_zynqmp_ep.h |    2 +
>  3 files changed, 151 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/usb/host/xhci-zynqmp.c

Can you convert this to use driver model? See xhci-exynos5.c for an example.

Regards,
Simon