[U-Boot] [PATCH] nios2: configure STATUS_LED_BOOT

[Thomas Chou]

On 09/05/2015 09:04 PM, Thomas Chou wrote:
> Define STATUS_LED_BOOT. So the boot LED will be initialized
> in board_init_r(), and show the boot progress.
>
> Though the boot LED is set to blinking in board_init_r(),
> only the powerpc and nios2 really support blinking. All other
> archs just turn the LED on and can not blink.
>
> After the commit "nios2: Switch to generic timer", with the
> removal of call to status_led_tick(), nios2 can not blink LED.
> But it doesn't really matter, because U-Boot usually runs a very
> short time. It should be enough to turn boot LED on and off
> during boot process.
>
> Signed-off-by: Thomas Chou <thomas at wytron.com.tw>
> ---
>   include/configs/nios2-generic.h | 3 ++-
>   1 file changed, 2 insertions(+), 1 deletion(-)

Applied to u-boot-nios.