[U-Boot] [PATCH 2/3] omap3: cm-t3517: fix MMC1 pinmux

[Igor Grinberg]

On 09/08/15 09:50, Dmitry Lifshitz wrote:
> Fix MMC1 pinmux setup, thus enable SD/MMC card support with CM-T3517.
> 
> Signed-off-by: Dmitry Lifshitz <lifshitz at compulab.co.il>

Acked-by: Igor Grinberg <grinberg at compulab.co.il>

> ---
>  board/compulab/cm_t3517/mux.c |   12 ++++++------
>  1 files changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/board/compulab/cm_t3517/mux.c b/board/compulab/cm_t3517/mux.c
> index 88ce2cc..f31f19e 100644
> --- a/board/compulab/cm_t3517/mux.c
> +++ b/board/compulab/cm_t3517/mux.c
> @@ -121,12 +121,12 @@ void set_muxconf_regs(void)
>  	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | EN  | M4)); /*GPIO_147*/
>  
>  	/* MMC1 */
> -	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0));
> -	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0));
> -	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0));
> -	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0));
> -	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0));
> -	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0));
> +	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0));
> +	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS  | M0));
> +	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS  | M0));
> +	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS  | M0));
> +	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS  | M0));
> +	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS  | M0));
>  
>  	/* DSS */
>  	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0));
> 

-- 
Regards,
Igor.