[U-Boot] [PATCH V2 00/11] Add board detection for Odroid XU3 / XU3Lite / XU4

[Przemyslaw Marczak]

Hello Anand,

On 09/27/2015 02:20 PM, Anand Moon wrote:
> Hi Przemyslaw,
>
> On 21 September 2015 at 17:56, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> This patchset adds:
>> - CPU model in dts for Chromebook Peach Pi as Exynos5800
>> - set the cpu id of Exynos5422 to 0x5422
>> - S2MPS11 PMIC I/O driver
>> - Exynos5420-compatible (9-channel, 12-bit) ADC driver
>> - new file for Exynos5: exynos5-dt-types.c
>> - board detection for Odroid XU3 / XU3lite / XU4
>> - fixed ADC val for XU4
>>
>> This was tested on Odroid XU3 and XU3 Lite, without the XU4,
>> but I'm waiting for reply from the Odroid forum users.
>>
>> Tested with buildman for samsung.
>>
>> Available on github:
>> https://github.com/bobenstein/u-boot/tree/xu3-detect-patchset-v1
>> https://github.com/bobenstein/u-boot/tree/xu3-detect-patchset-v2
>>
>> Przemyslaw Marczak (11):
>>    samsung: board/misc: check returned pointer for get_board_type() calls
>>    s5p: cpu_info: print "cpu-model" if exists in dts
>>    Peach-Pi: dts: add cpu-model string
>>    Exynos5422/5800: set cpu id to 0x5422
>>    dm: pmic: add s2mps11 PMIC I/O driver
>>    dm: adc: add simple ADC uclass implementation
>>    dm: adc: add Exynos54xx compatible ADC driver
>>    Odroid-XU3: enable s2mps11 PMIC support
>>    Exynos54xx: dts: add ADC node
>>    Odroid-XU3: dts: enable ADC, with request for pre-reloc bind
>>    exynos5-dt-types: add board detection for Odroid XU3/XU3L/XU4.
>>
>>   arch/arm/cpu/armv7/s5p-common/cpu_info.c  |  14 ++-
>>   arch/arm/dts/exynos5422-odroidxu3.dts     |  12 ++
>>   arch/arm/dts/exynos54xx.dtsi              |   7 ++
>>   arch/arm/dts/exynos5800-peach-pi.dts      |   1 +
>>   arch/arm/mach-exynos/clock.c              |  16 +--
>>   arch/arm/mach-exynos/clock_init_exynos5.c |   2 +-
>>   arch/arm/mach-exynos/common_setup.h       |   4 +-
>>   arch/arm/mach-exynos/include/mach/adc.h   |  45 +++++++
>>   arch/arm/mach-exynos/include/mach/cpu.h   |   6 +-
>>   arch/arm/mach-exynos/include/mach/gpio.h  |   4 +-
>>   arch/arm/mach-exynos/pinmux.c             |   2 +-
>>   arch/arm/mach-exynos/power.c              |   2 +-
>>   board/samsung/common/Makefile             |   5 +-
>>   board/samsung/common/board.c              |   4 +-
>>   board/samsung/common/exynos5-dt-types.c   | 196 ++++++++++++++++++++++++++++++
>>   board/samsung/common/exynos5-dt.c         |  12 ++
>>   board/samsung/common/misc.c               |   3 +
>>   configs/odroid-xu3_defconfig              |   5 +
>>   doc/device-tree-bindings/pmic/s2mps11.txt |  17 +++
>>   drivers/Kconfig                           |   2 +
>>   drivers/Makefile                          |   1 +
>>   drivers/adc/Kconfig                       |  17 +++
>>   drivers/adc/Makefile                      |   9 ++
>>   drivers/adc/adc-uclass.c                  |  76 ++++++++++++
>>   drivers/adc/exynos-adc.c                  | 102 ++++++++++++++++
>>   drivers/power/pmic/Kconfig                |  14 +++
>>   drivers/power/pmic/Makefile               |   1 +
>>   drivers/power/pmic/s2mps11.c              |  60 +++++++++
>>   include/adc.h                             |  88 ++++++++++++++
>>   include/configs/odroid_xu3.h              |  12 ++
>>   include/dm/uclass-id.h                    |   1 +
>>   include/power/s2mps11.h                   | 109 +++++++++++++++++
>>   include/samsung/exynos5-dt-types.h        |  27 ++++
>>   33 files changed, 854 insertions(+), 22 deletions(-)
>>   create mode 100644 board/samsung/common/exynos5-dt-types.c
>>   create mode 100644 doc/device-tree-bindings/pmic/s2mps11.txt
>>   create mode 100644 drivers/adc/Kconfig
>>   create mode 100644 drivers/adc/Makefile
>>   create mode 100644 drivers/adc/adc-uclass.c
>>   create mode 100644 drivers/adc/exynos-adc.c
>>   create mode 100644 drivers/power/pmic/s2mps11.c
>>   create mode 100644 include/adc.h
>>   create mode 100644 include/power/s2mps11.h
>>   create mode 100644 include/samsung/exynos5-dt-types.h
>>
>
> I have tested this patch on Odroid-XU3 and Odroid-XU4.
>
> Both using micoSD and eMMC cards.
>
> Tested-by: Anand Moon <linux.amoon at gmail.com>
>
> -Anand Moon
>
>> --
>> 1.9.1
>>
>

Thank you for testing!

Best regards,
-- 
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com