[U-Boot] [PATCH 2/2] am437x: Add am57xx_evm_defconfig using CONFIG_DM
Mugunthan V N
mugunthanvnm at ti.com
Tue Sep 29 11:12:27 CEST 2015
Import various DT files for am57xx-beagle-x15 from
Linux Kernel v4.2
Add config file for this board, enable DM, DM_GPIO,
DM_SERIAL and DM_MMC.
Signed-off-by: Mugunthan V N <mugunthanvnm at ti.com>
---
arch/arm/dts/Makefile | 1 +
arch/arm/dts/am57xx-beagle-x15.dts | 699 +++++++++++++++++++++++++++++++++++++
configs/am57xx_evm_defconfig | 19 +
3 files changed, 719 insertions(+)
create mode 100644 arch/arm/dts/am57xx-beagle-x15.dts
create mode 100644 configs/am57xx_evm_defconfig
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index c391f3b..55d5150 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -70,6 +70,7 @@ dtb-$(CONFIG_ARCH_SOCFPGA) += \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb
dtb-$(CONFIG_TARGET_DRA7XX_EVM) += dra72-evm.dtb dra7-evm.dtb
+dtb-$(CONFIG_TARGET_BEAGLE_X15) += am57xx-beagle-x15.dtb
dtb-$(CONFIG_TARGET_STV0991) += stv0991.dtb
dtb-$(CONFIG_LS102XA) += ls1021a-qds.dtb \
diff --git a/arch/arm/dts/am57xx-beagle-x15.dts b/arch/arm/dts/am57xx-beagle-x15.dts
new file mode 100644
index 0000000..e424562
--- /dev/null
+++ b/arch/arm/dts/am57xx-beagle-x15.dts
@@ -0,0 +1,699 @@
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15";
+ compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ chosen {
+ stdout-path = &uart3;
+ };
+
+ aliases {
+ rtc0 = &mcp_rtc;
+ rtc1 = &tps659038_rtc;
+ rtc2 = &rtc;
+ display0 = &hdmi0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <®en1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&smps3_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led at 0 {
+ label = "beagle-x15:usr0";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led at 1 {
+ label = "beagle-x15:usr1";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led at 2 {
+ label = "beagle-x15:usr2";
+ gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led at 3 {
+ label = "beagle-x15:usr3";
+ gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ide-disk";
+ default-state = "off";
+ };
+ };
+
+ gpio_fan: gpio_fan {
+ /* Based on 5v 500mA AFB02505HHB */
+ compatible = "gpio-fan";
+ gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0>,
+ <13000 1>;
+ #cooling-cells = <2>;
+ };
+
+ extcon_usb1: extcon_usb1 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio7 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&extcon_usb1_pins>;
+ };
+
+ extcon_usb2: extcon_usb2 {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&gpio7 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&extcon_usb2_pins>;
+ };
+
+ hdmi0: connector {
+ compatible = "hdmi-connector";
+ label = "hdmi";
+
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&tpd12s015_out>;
+ };
+ };
+ };
+
+ tpd12s015: encoder {
+ compatible = "ti,tpd12s015";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tpd12s015_pins>;
+
+ gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>, /* gpio7_10, CT CP HPD */
+ <&gpio6 28 GPIO_ACTIVE_HIGH>, /* gpio6_28, LS OE */
+ <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port at 0 {
+ reg = <0>;
+
+ tpd12s015_in: endpoint {
+ remote-endpoint = <&hdmi_out>;
+ };
+ };
+
+ port at 1 {
+ reg = <1>;
+
+ tpd12s015_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+ };
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
+ 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
+ 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
+ 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ hdmi_pins: pinmux_hdmi_pins {
+ pinctrl-single,pins = <
+ 0x408 (PIN_INPUT | MUX_MODE1) /* i2c2_sda.hdmi1_ddc_scl */
+ 0x40c (PIN_INPUT | MUX_MODE1) /* i2c2_scl.hdmi1_ddc_sda */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ 0x3f8 (PIN_INPUT_SLEW | MUX_MODE2) /* uart2_ctsn.uart3_rxd */
+ 0x3fc (PIN_INPUT_SLEW | MUX_MODE1) /* uart2_rtsn.uart3_txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ cpsw_pins_default: cpsw_pins_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tclk */
+ 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_tctl */
+ 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td3 */
+ 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td2 */
+ 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td1 */
+ 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii1_td0 */
+ 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii1_rclk */
+ 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii1_rctl */
+ 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd3 */
+ 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd2 */
+ 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii1_rd1 */
+ 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii1_rd0 */
+
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tclk */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* rgmii2_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* rgmii2_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* rgmii2_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* rgmii2_rd0 */
+ >;
+
+ };
+
+ cpsw_pins_sleep: cpsw_pins_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_INPUT | MUX_MODE15)
+ 0x254 (PIN_INPUT | MUX_MODE15)
+ 0x258 (PIN_INPUT | MUX_MODE15)
+ 0x25c (PIN_INPUT | MUX_MODE15)
+ 0x260 (PIN_INPUT | MUX_MODE15)
+ 0x264 (PIN_INPUT | MUX_MODE15)
+ 0x268 (PIN_INPUT | MUX_MODE15)
+ 0x26c (PIN_INPUT | MUX_MODE15)
+ 0x270 (PIN_INPUT | MUX_MODE15)
+ 0x274 (PIN_INPUT | MUX_MODE15)
+ 0x278 (PIN_INPUT | MUX_MODE15)
+ 0x27c (PIN_INPUT | MUX_MODE15)
+
+ /* Slave 2 */
+ 0x198 (PIN_INPUT | MUX_MODE15)
+ 0x19c (PIN_INPUT | MUX_MODE15)
+ 0x1a0 (PIN_INPUT | MUX_MODE15)
+ 0x1a4 (PIN_INPUT | MUX_MODE15)
+ 0x1a8 (PIN_INPUT | MUX_MODE15)
+ 0x1ac (PIN_INPUT | MUX_MODE15)
+ 0x1b0 (PIN_INPUT | MUX_MODE15)
+ 0x1b4 (PIN_INPUT | MUX_MODE15)
+ 0x1b8 (PIN_INPUT | MUX_MODE15)
+ 0x1bc (PIN_INPUT | MUX_MODE15)
+ 0x1c0 (PIN_INPUT | MUX_MODE15)
+ 0x1c4 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_pins_default: davinci_mdio_pins_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_mclk */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_d */
+ >;
+ };
+
+ davinci_mdio_pins_sleep: davinci_mdio_pins_sleep {
+ pinctrl-single,pins = <
+ 0x23c (PIN_INPUT | MUX_MODE15)
+ 0x240 (PIN_INPUT | MUX_MODE15)
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ tmp102_pins_default: tmp102_pins_default {
+ pinctrl-single,pins = <
+ 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
+ >;
+ };
+
+ mcp79410_pins_default: mcp79410_pins_default {
+ pinctrl-single,pins = <
+ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ extcon_usb1_pins: extcon_usb1_pins {
+ pinctrl-single,pins = <
+ 0x3ec (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_rtsn.gpio7_25 */
+ >;
+ };
+
+ extcon_usb2_pins: extcon_usb2_pins {
+ pinctrl-single,pins = <
+ 0x3e8 (PIN_INPUT_PULLUP | MUX_MODE14) /* uart1_ctsn.gpio7_24 */
+ >;
+ };
+
+ tpd12s015_pins: pinmux_tpd12s015_pins {
+ pinctrl-single,pins = <
+ 0x3b0 (PIN_OUTPUT | MUX_MODE14) /* gpio7_10 CT_CP_HPD */
+ 0x3b8 (PIN_INPUT_PULLDOWN | MUX_MODE14) /* gpio7_12 HPD */
+ 0x370 (PIN_OUTPUT | MUX_MODE14) /* gpio6_28 LS_OE */
+ >;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038 at 58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_CORE */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS7 unused */
+
+ smps8_reg: smps8 {
+ /* VDD_1V8 */
+ regulator-name = "smps8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS9 unused */
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_SHV5 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+
+ tps659038_gpio: tps659038_gpio {
+ compatible = "ti,palmas-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
+
+ tmp102: tmp102 at 48 {
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tmp102_pins_default>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ #thermal-sensor-cells = <1>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ mcp_rtc: rtc at 6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_EDGE_RISING>; /* IRQ_SYS_1N */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcp79410_pins_default>;
+
+ vcc-supply = <&vdd_3v3>;
+ wakeup-source;
+ };
+};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x3f8>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_pins_default>;
+ pinctrl-1 = <&cpsw_pins_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <1>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_pins_default>;
+ pinctrl-1 = <&davinci_mdio_pins_sleep>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ vmmc_aux-supply = <&vdd_3v3>;
+ pbias-supply = <&pbias_mmc_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&omap_dwc3_1 {
+ extcon = <&extcon_usb1>;
+};
+
+&omap_dwc3_2 {
+ extcon = <&extcon_usb2>;
+};
+
+&usb2 {
+ dr_mode = "peripheral";
+};
+
+&cpu_trips {
+ cpu_alert1: cpu_alert1 {
+ temperature = <50000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+};
+
+&cpu_cooling_maps {
+ map1 {
+ trip = <&cpu_alert1>;
+ cooling-device = <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+};
+
+&thermal_zones {
+ board_thermal: board_thermal {
+ polling-delay-passive = <1250>; /* milliseconds */
+ polling-delay = <1500>; /* milliseconds */
+
+ /* sensor ID */
+ thermal-sensors = <&tmp102 0>;
+
+ board_trips: trips {
+ board_alert0: board_alert {
+ temperature = <40000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "active";
+ };
+
+ board_crit: board_crit {
+ temperature = <105000>; /* millicelsius */
+ hysteresis = <0>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ board_cooling_maps: cooling-maps {
+ map0 {
+ trip = <&board_alert0>;
+ cooling-device =
+ <&gpio_fan THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+ };
+};
+
+&dss {
+ status = "ok";
+
+ vdda_video-supply = <&ldoln_reg>;
+};
+
+&hdmi {
+ status = "ok";
+ vdda-supply = <&ldo3_reg>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_pins>;
+
+ port {
+ hdmi_out: endpoint {
+ remote-endpoint = <&tpd12s015_in>;
+ };
+ };
+};
diff --git a/configs/am57xx_evm_defconfig b/configs/am57xx_evm_defconfig
new file mode 100644
index 0000000..f6566bf
--- /dev/null
+++ b/configs/am57xx_evm_defconfig
@@ -0,0 +1,19 @@
+CONFIG_ARM=y
+CONFIG_OMAP54XX=y
+CONFIG_TARGET_BEAGLE_X15=y
+CONFIG_DEFAULT_DEVICE_TREE="am57xx-beagle-x15"
+CONFIG_SPL=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_STACK_R_ADDR=0x82000000
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=3"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_OF_CONTROL=y
+CONFIG_DM=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_BAR=y
+CONFIG_DM_GPIO=y
+CONFIG_DM_SERIAL=y
+CONFIG_DM_MMC=y
--
2.6.0.rc2.10.gf4d9753
More information about the U-Boot
mailing list