[U-Boot] [PATCH v2 04/14] ARM: uniphier: move CONFIG_SUPPORT_CARD_* macros to local file

Masahiro Yamada yamada.masahiro at socionext.com
Mon Sep 21 17:27:32 CEST 2015


It is no longer necessary to define CONFIG_SUPPORT_CARD_* globally.
Move them to a C file as local macros.  Also, rename the C file.

Signed-off-by: Masahiro Yamada <yamada.masahiro at socionext.com>
---

 arch/arm/mach-uniphier/Makefile                           |  2 +-
 .../{support_card.c => micro-support-card.c}              | 15 +++++++++------
 include/configs/uniphier.h                                | 11 ++---------
 3 files changed, 12 insertions(+), 16 deletions(-)
 rename arch/arm/mach-uniphier/{support_card.c => micro-support-card.c} (90%)

diff --git a/arch/arm/mach-uniphier/Makefile b/arch/arm/mach-uniphier/Makefile
index 5f17557..df6a569 100644
--- a/arch/arm/mach-uniphier/Makefile
+++ b/arch/arm/mach-uniphier/Makefile
@@ -29,7 +29,7 @@ endif
 
 obj-y += timer.o
 
-obj-$(CONFIG_MICRO_SUPPORT_CARD) += support_card.o
+obj-$(CONFIG_MICRO_SUPPORT_CARD) += micro-support-card.o
 
 obj-$(CONFIG_MACH_PH1_SLD3)	+= ph1-sld3/
 obj-$(CONFIG_MACH_PH1_LD4)	+= ph1-ld4/
diff --git a/arch/arm/mach-uniphier/support_card.c b/arch/arm/mach-uniphier/micro-support-card.c
similarity index 90%
rename from arch/arm/mach-uniphier/support_card.c
rename to arch/arm/mach-uniphier/micro-support-card.c
index f833306..4c34748 100644
--- a/arch/arm/mach-uniphier/support_card.c
+++ b/arch/arm/mach-uniphier/micro-support-card.c
@@ -9,10 +9,13 @@
 #include <linux/io.h>
 #include <mach/micro-support-card.h>
 
-#define MICRO_SUPPORT_CARD_RESET	\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x000D0034)
-#define MICRO_SUPPORT_CARD_REVISION	\
-				((CONFIG_SUPPORT_CARD_BASE) + 0x000D00E0)
+#define MICRO_SUPPORT_CARD_BASE		0x43f00000
+#define SMC911X_BASE			((MICRO_SUPPORT_CARD_BASE) + 0x00000)
+#define LED_BASE			((MICRO_SUPPORT_CARD_BASE) + 0x90000)
+#define NS16550A_BASE			((MICRO_SUPPORT_CARD_BASE) + 0xb0000)
+#define MICRO_SUPPORT_CARD_RESET	((MICRO_SUPPORT_CARD_BASE) + 0xd0034)
+#define MICRO_SUPPORT_CARD_REVISION	((MICRO_SUPPORT_CARD_BASE) + 0xd00E0)
+
 /*
  * 0: reset deassert, 1: reset
  *
@@ -60,7 +63,7 @@ void support_card_init(void)
 
 int board_eth_init(bd_t *bis)
 {
-	return smc911x_initialize(0, CONFIG_SMC911X_BASE);
+	return smc911x_initialize(0, SMC911X_BASE);
 }
 #endif
 
@@ -224,5 +227,5 @@ void led_puts(const char *s)
 			s++;
 	}
 
-	writel(~val, CONFIG_SUPPORT_CARD_LED_BASE);
+	writel(~val, LED_BASE);
 }
diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index a15838b..6405961 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -59,14 +59,6 @@
 #define CONFIG_I2C_EEPROM
 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
 
-/*
- * Support card address map
- */
-#define CONFIG_SUPPORT_CARD_BASE	0x43f00000
-#define CONFIG_SUPPORT_CARD_ETHER_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00000000)
-#define CONFIG_SUPPORT_CARD_LED_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x00090000)
-#define CONFIG_SUPPORT_CARD_UART_BASE	(CONFIG_SUPPORT_CARD_BASE + 0x000b0000)
-
 #ifdef CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_COM1		CONFIG_SUPPORT_CARD_UART_BASE
@@ -81,7 +73,8 @@
 
 #define CONFIG_SMC911X
 
-#define CONFIG_SMC911X_BASE		CONFIG_SUPPORT_CARD_ETHER_BASE
+/* dummy: referenced by examples/standalone/smc911x_eeprom.c */
+#define CONFIG_SMC911X_BASE	0
 #define CONFIG_SMC911X_32_BIT
 
 /*-----------------------------------------------------------------------
-- 
1.9.1



More information about the U-Boot mailing list