[U-Boot] [PATCH v4 01/16] spi: Add zynq qspi controller driver

[Jagan Teki]

On 3 September 2015 at 14:08, Siva Durga Prasad Paladugu
<siva.durga.paladugu at xilinx.com> wrote:
> Hi Jagan,
>
>> -----Original Message-----
>> From: Jagan Teki [mailto:jteki at openedev.com]
>> Sent: Thursday, September 03, 2015 1:38 PM
>> To: Siva Durga Prasad Paladugu
>> Cc: u-boot at lists.denx.de; Michal Simek
>> Subject: Re: [PATCH v4 01/16] spi: Add zynq qspi controller driver
>>
>> Hi Siva,
>>
>> On 3 September 2015 at 12:56, Siva Durga Prasad Paladugu
>> <siva.durga.paladugu at xilinx.com> wrote:
>> > Hi,
>> >
>> >> -----Original Message-----
>> >> From: Jagan Teki [mailto:jteki at openedev.com]
>> >> Sent: Tuesday, September 01, 2015 11:42 AM
>> >> To: u-boot at lists.denx.de
>> >> Cc: Jagan Teki; Michal Simek; Siva Durga Prasad Paladugu
>> >> Subject: [PATCH v4 01/16] spi: Add zynq qspi controller driver
>> >>
>> >> Added zynq qspi controller driver for Xilinx Zynq APSOC, this driver
>> >> is driver- model driven with devicetree support.
>> >>
>> >> => sf probe
>> >> SF: Detected S25FL128S_64K with page size 256 Bytes, erase size 64
>> >> KiB, total
>> >> 16 MiB => mw.b 0x100 0xCC 0x1000000 => sf update 0x100 0x0 0x1000000
>> >> device 0 whole chip
>> >> 16777216 bytes written, 0 bytes skipped in 59.842s, speed 289262 B/s
>> >> => sf read 0x3000000 0x0 0x1000000 device 0 whole chip
>> >> SF: 16777216 bytes @ 0x0 Read: OK
>> >> => cmp.b 0x3000000 0x100 0x1000000
>> >> Total of 16777216 byte(s) were the same
>
> How about this log. Looks like you have already tested.
> Is it just message or you copied the log?

I have verified it on microzed, just wanted to verify from your side
on zc70x if possible?

thanks!
--
Jagan.