[U-Boot] [PATCH] Convert omap3_logic to ti_omap3_common.h

[Adam Ford]

Convert to using the common config files.

Signed-off-by: Adam Ford <adam.ford at logicpd.com>
---

 arch/arm/cpu/armv7/omap3/Kconfig    |    3 ++
 board/logicpd/omap3som/omap3logic.c |   14 +++++++++
 include/configs/omap3_logic.h       |   59 +++++++----------------------------
 3 files changed, 28 insertions(+), 48 deletions(-)

diff --git a/arch/arm/cpu/armv7/omap3/Kconfig b/arch/arm/cpu/armv7/omap3/Kconfig
index f4fb6cb..cda38e1 100644
--- a/arch/arm/cpu/armv7/omap3/Kconfig
+++ b/arch/arm/cpu/armv7/omap3/Kconfig
@@ -92,6 +92,9 @@ config TARGET_MCX
 
 config TARGET_OMAP3_LOGIC
 	bool "OMAP3 Logic"
+	select DM
+	select DM_SERIAL
+	select DM_GPIO
 
 config TARGET_OMAP3_MVBLX
 	bool "OMAP3 MVBLX"
diff --git a/board/logicpd/omap3som/omap3logic.c b/board/logicpd/omap3som/omap3logic.c
index 609edf1..babb0dc 100644
--- a/board/logicpd/omap3som/omap3logic.c
+++ b/board/logicpd/omap3som/omap3logic.c
@@ -12,6 +12,8 @@
  * SPDX-License-Identifier:	GPL-2.0+
  */
 #include <common.h>
+#include <dm.h>
+#include <ns16550.h>
 #include <netdev.h>
 #include <flash.h>
 #include <nand.h>
@@ -33,6 +35,18 @@ DECLARE_GLOBAL_DATA_PTR;
  * machine IDs; row it selected based on CPU column is slected based
  * on hsusb0_data5 pin having a pulldown resistor
  */
+
+static const struct ns16550_platdata omap3logic_serial = {
+	OMAP34XX_UART1,
+	2,
+	V_NS16550_CLK
+};
+
+U_BOOT_DEVICE(omap3logic_uart) = {
+	"serial_omap",
+	&omap3logic_serial
+};
+
 static struct board_id {
 	char *name;
 	int machine_id;
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index e09e617..8bd3634 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -14,25 +14,16 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_OMAP			/* in a TI OMAP core */
-#define CONFIG_OMAP3_LOGIC		/* working with Logic OMAP boards */
-#define CONFIG_OMAP_GPIO
-#define CONFIG_OMAP_COMMON
-/* Common ARM Erratas */
-#define CONFIG_ARM_ERRATA_454179
-#define CONFIG_ARM_ERRATA_430973
-#define CONFIG_ARM_ERRATA_621766
 
+#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
 #define CONFIG_SYS_TEXT_BASE	0x80400000
 
-#define CONFIG_SDRC	/* The chip has SDRC controller */
-
-#include <asm/arch/cpu.h>	/* get chip and board defs */
-#include <asm/arch/omap.h>
-
+#include <configs/ti_omap3_common.h>
+#define CONFIG_OMAP3_LOGIC		/* working with Logic OMAP boards */
 /*
  * Display CPU and Board information
  */
+
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
@@ -55,25 +46,14 @@
  */
 #define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
 						/* Sector */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
-
 /*
  * Hardware drivers
  */
 
 /*
- * NS16550 Configuration
- */
-#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */
-
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
-
-/*
  * select serial console configuration
  */
+#undef CONFIG_CONS_INDEX
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
 #define CONFIG_SERIAL1			1	/* UART1 on OMAP Logic boards */
@@ -92,7 +72,6 @@
 #define CONFIG_CMD_CACHE
 #define CONFIG_CMD_EXT2		/* EXT2 Support			*/
 #define CONFIG_CMD_FAT		/* FAT support			*/
-#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
 #define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
 #define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
 #define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
@@ -120,32 +99,24 @@
 /*
  * TWL4030
  */
-#define CONFIG_TWL4030_POWER
+
 
 /*
  * Board NAND Info.
  */
+#define CONFIG_SYS_NAND_BASE            NAND_BASE
 #define CONFIG_SYS_NAND_QUIET_TEST
 #define CONFIG_NAND_OMAP_GPMC
 #define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
 							/* to access nand */
-#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
-							/* to access nand at */
-							/* CS0 */
+
 
 #define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
 							/* NAND devices */
 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
-#define CONFIG_JFFS2_NAND
-/* nand device jffs2 lives on */
-#define CONFIG_JFFS2_DEV		"nand0"
-/* start of jffs2 partition */
-#define CONFIG_JFFS2_PART_OFFSET	0x680000
-#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
-							/* partition */
+
 
 /* Environment information */
-#define CONFIG_BOOTDELAY		2
 
 /*
  * PREBOOT assumes the 4.3" display is attached.  User can interrupt
@@ -239,17 +210,13 @@
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
 					sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-/* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
 #define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
 					0x01F00000) /* 31MB */
 
-#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
-								/* address */
-
 /*
  * OMAP3 has 12 GP timers, they can be driven by the system clock
  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
@@ -292,12 +259,8 @@
 #define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
 #define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET
 
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
 #define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
 #define CONFIG_SYS_INIT_RAM_SIZE	0x800
-#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
-					 CONFIG_SYS_INIT_RAM_SIZE - \
-					 GENERATED_GBL_DATA_SIZE)
 
 /*
  * SMSC922x Ethernet
-- 
1.7.9.5