[U-Boot] [PATCH 3/4] imx: mx7dsabresd: drop code for CONFIG_CMD_BMODE

[Fabio Estevam]

Hi Peng,

On Mon, Sep 14, 2015 at 9:31 PM, Peng Fan <b51431 at freescale.com> wrote:
> Hi Fabio,
> On Mon, Sep 14, 2015 at 03:09:24PM -0300, Fabio Estevam wrote:
>>Hi Peng,
>>
>>On Mon, Sep 14, 2015 at 6:08 AM, Peng Fan <Peng.Fan at freescale.com> wrote:
>>> Since i.MX7D does not support warm reset, so boot_mode_apply
>>> actually will not work. Also we use outer pmic reset and drop
>>> internal reset signal, so drop boot mode code for 7dsabresd board.
>>
>>Booting via bmode is working fine here.
>
> If boot from sd1, bmode sd1 work well. If boot from qspi1, bmode qspi work well.
> This is expected. If boot from qspi, but we use 'bmode sd1', this will not work.

Understood. I only booted from sd1 and did 'bmode sd1'.

Regards,

Fabio Estevam