[U-Boot] [PATCH 7/7] exynos5-dt: add board detection for Odroid XU3/XU3L/XU4.
Przemyslaw Marczak
p.marczak at samsung.com
Fri Sep 4 17:04:35 CEST 2015
Hello,
On 09/01/2015 02:33 AM, Simon Glass wrote:
> Hi Przemyslaw,
>
> On 28 August 2015 at 07:59, Przemyslaw Marczak <p.marczak at samsung.com> wrote:
>> There are few revisions of Odroid XU3/XU4:
>> Rev ADC Board
>> 0.1 0 XU3 0.1
>> 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT
>> 0.3 739 XU4 0.1
>>
>> This commit adds implementation of functions:
>> - set_board_type() - read ADC and set type
>> - get_board_rev() - returns board revision: 1..3
>> - board_is_odroidxu3() - returns bool
>> - board_is_odroidxu4() - returns bool
>> - get_board_type() - returns board type string
>>
>> After I2C controller init, the last function can check
>> if the board is "Lite" variant for XU3, by probing chip
>> 0x40 on I2C0 (INA231 - exists only on non-lite).
>> This is useful for setting fdt file name at misc_init_r().
>>
>> The enabled configs:
>> - CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>> - CONFIG_ODROID_REV_AIN
>> - CONFIG_REVISION_TAG
>> - CONFIG_MISC_INIT_R
>> - CONFIG_BOARD_TYPES
>>
>> This also redefines CONFIG_SYS_BOARD to "odroid".
>>
>> Signed-off-by: Przemyslaw Marczak <p.marczak at samsung.com>
>> ---
>> board/samsung/common/exynos5-dt.c | 114 ++++++++++++++++++++++++++++++++++++++
>> include/configs/odroid_xu3.h | 12 ++++
>> 2 files changed, 126 insertions(+)
>>
>> diff --git a/board/samsung/common/exynos5-dt.c b/board/samsung/common/exynos5-dt.c
>> index 7d1b88a..41141df 100644
>> --- a/board/samsung/common/exynos5-dt.c
>> +++ b/board/samsung/common/exynos5-dt.c
>> @@ -18,6 +18,7 @@
>> #include <usb.h>
>> #include <video_bridge.h>
>> #include <asm/gpio.h>
>> +#include <asm/arch/adc.h>
>> #include <asm/arch/cpu.h>
>> #include <asm/arch/dwmmc.h>
>> #include <asm/arch/mmc.h>
>> @@ -28,6 +29,7 @@
>> #include <power/max77686_pmic.h>
>> #include <power/regulator.h>
>> #include <power/s5m8767.h>
>> +#include <power/s2mps11.h>
>> #include <tmu.h>
>>
>> DECLARE_GLOBAL_DATA_PTR;
>> @@ -360,3 +362,115 @@ char *get_dfu_alt_boot(char *interface, char *devstr)
>> return alt_boot;
>> }
>> #endif
>> +
>> +#ifdef CONFIG_REVISION_TAG
>
> Can we check the compatible string instead? It would be good to avoid
> #ifdef in common code.
>
Ok, I will add some lines to check it.
>> +/**
>> + * Odroix XU3/4 board revisions:
>> + * Rev ADC Board
>> + * 0.1 0 XU3 0.1
>> + * 0.2 372 XU3 0.2 | XU3L - no DISPLAYPORT (probe I2C0:0x40 / INA231)
>> + * 0.3 739 XU4 0.1
>> + * Use +/-20 for ADC value tolerance.
>> + */
>> +enum {
>> + ODROID_XU3_REV01,
>> + ODROID_XU3_REV02,
>> + ODROID_XU4_REV01,
>> + ODROID_UNKNOWN_REV,
>> + ODROID_REV_COUNT,
>> +};
>> +
>> +struct odroid_type {
>> + int board_type;
>> + int rev;
>> + int adc_val;
>> + const char *name;
>> +};
>> +
>> +struct odroid_type odroid_type[] = {
>> + { ODROID_XU3_REV01, 1, 0, "xu3" },
>> + { ODROID_XU3_REV02, 2, 372, "xu3" },
>> + { ODROID_XU4_REV01, 1, 739, "xu4" },
>> + { ODROID_UNKNOWN_REV, 0, 4095, "unknown" },
>> +};
>> +
>> +bool board_is_odroidxu3(void)
>> +{
>> + if (gd->board_type < ODROID_XU4_REV01)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +bool board_is_odroidxu4(void)
>> +{
>> + if (gd->board_type > ODROID_XU3_REV02)
>> + return true;
>> +
>> + return false;
>> +}
>> +
>> +int set_board_type(void)
>> +{
>> + int adcval, i;
>> +
>> + adcval = exynos_adc_read_channel(CONFIG_ODROID_REV_AIN);
>> + if (adcval < 0)
>> + return adcval;
>> +
>> + for (i = 0; i < ODROID_REV_COUNT; i++) {
>> + /* ADC tolerance: +20 */
>> + if (adcval < odroid_type[i].adc_val + 20) {
>> + gd->board_type = i;
>> + return i;
>> + }
>> + }
>> +
>> + return ODROID_UNKNOWN_REV;
>> +}
>> +
>> +int get_board_rev(void)
>> +{
>> + return odroid_type[gd->board_type].rev;
>> +}
>> +
>> +/**
>> + * get_board_type - returns pointer to one of the board type string.
>> + * Board types: "xu3", "xu3-lite", "xu4". However the "xu3itel" can be
>> + * detected only when the i2c controller is ready to use. Fortunately,
>> + * XU3 and XU3L are compatible, and the information about board lite
>> + * revision is needed before boot linux, to set proper environment
>> + * variable: $fdtfile.
>> + */
>> +const char *get_board_type(void)
>> +{
>> + const char *type_xu3l = "xu3-lite";
>> + struct udevice *dev, *chip;
>> + int ret;
>> +
>> + if (gd->board_type != ODROID_XU3_REV02)
>> + goto exit;
>> +
>> + ret = pmic_get("s2mps11", &dev);
>> + if (ret)
>> + goto exit;
>> +
>> + /* Enable LDO26: 3.0V */
>> + ret = pmic_reg_write(dev, S2MPS11_REG_L26CTRL,
>> + S2MPS11_LDO26_ENABLE);
>> + if (ret)
>> + goto exit;
>> +
>> + /* Check XU3Lite by probe INA231 I2C0:0x40 */
>> + ret = uclass_get_device(UCLASS_I2C, 0, &dev);
>> + if (ret)
>> + goto exit;
>> +
>> + ret = dm_i2c_probe(dev, 0x40, 0x0, &chip);
>> + if (ret)
>> + return type_xu3l;
>> +
>> +exit:
>> + return odroid_type[gd->board_type].name;
>> +}
>> +#endif
>> diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h
>> index 3c70158..648e48b 100644
>> --- a/include/configs/odroid_xu3.h
>> +++ b/include/configs/odroid_xu3.h
>> @@ -94,6 +94,8 @@
>> "boot.scr fat 0 1;" \
>> "boot.cmd fat 0 1;" \
>> "exynos5422-odroidxu3.dtb fat 0 1;" \
>> + "exynos5422-odroidxu3-lite.dtb fat 0 1;" \
>> + "exynos5422-odroidxu4.dtb fat 0 1;" \
>> "boot part 0 1;" \
>> "root part 0 2\0"
>>
>> @@ -113,9 +115,19 @@
>>
>> /* Enable: board/samsung/common/misc.c to use set_dfu_alt_info() */
>> #define CONFIG_MISC_COMMON
>> +#define CONFIG_MISC_INIT_R
>> #define CONFIG_SET_DFU_ALT_INFO
>> #define CONFIG_SET_DFU_ALT_BUF_LEN (SZ_1K)
>>
>> +/* Set soc_rev, soc_id, board_rev, boardname, fdtfile */
>> +#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
>> +#define CONFIG_ODROID_REV_AIN 9
>> +#define CONFIG_REVISION_TAG
>> +#define CONFIG_BOARD_TYPES
>> +
>> +#undef CONFIG_SYS_BOARD
>> +#define CONFIG_SYS_BOARD "odroid"
>> +
>> /* Define new extra env settings, including DFU settings */
>> #undef CONFIG_EXTRA_ENV_SETTINGS
>> #define CONFIG_EXTRA_ENV_SETTINGS \
>> --
>> 1.9.1
>>
>
> Regards,
> Simon
>
Thanks,
--
Przemyslaw Marczak
Samsung R&D Institute Poland
Samsung Electronics
p.marczak at samsung.com
More information about the U-Boot
mailing list