[U-Boot] [PATCH 4/4] exynos: fix and cleanup do_sdhci_init()
Lukasz Majewski
l.majewski at samsung.com
Wed Sep 23 11:44:23 CEST 2015
Hi Tobias,
> The CD check is currently inverted. dm_gpio_get_value() returns
> one when a card is detected. All other values (zero when there
> is no card, or negative values for the internal errors) indicate
> failure.
>
> Signed-off-by: Tobias Jakobi <tjakobi at math.uni-bielefeld.de>
> ---
> drivers/mmc/s5p_sdhci.c | 20 +++++++++++---------
> 1 file changed, 11 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
> index 6be3609..bc04370 100644
> --- a/drivers/mmc/s5p_sdhci.c
> +++ b/drivers/mmc/s5p_sdhci.c
> @@ -102,29 +102,31 @@ struct sdhci_host sdhci_host[SDHCI_MAX_HOSTS];
>
> static int do_sdhci_init(struct sdhci_host *host)
> {
> - int dev_id, flag;
> - int err = 0;
> + int dev_id, flag, ret;
>
> flag = host->bus_width == 8 ? PINMUX_FLAG_8BIT_MODE :
> PINMUX_FLAG_NONE; dev_id = host->index + PERIPH_ID_SDMMC0;
>
> if (dm_gpio_is_valid(&host->pwr_gpio)) {
> dm_gpio_set_value(&host->pwr_gpio, 1);
> - err = exynos_pinmux_config(dev_id, flag);
> - if (err) {
> + ret = exynos_pinmux_config(dev_id, flag);
> + if (ret) {
> debug("MMC not configured\n");
> - return err;
> + return ret;
> }
> }
>
> if (dm_gpio_is_valid(&host->cd_gpio)) {
> - if (dm_gpio_get_value(&host->cd_gpio))
> + ret = dm_gpio_get_value(&host->cd_gpio);
> + if (ret != 1) {
> + debug("No card detected (%d)\n", ret);
> return -ENODEV;
> + }
>
> - err = exynos_pinmux_config(dev_id, flag);
> - if (err) {
> + ret = exynos_pinmux_config(dev_id, flag);
> + if (ret) {
> printf("external SD not configured\n");
> - return err;
> + return ret;
> }
> }
>
Reviewed-by: Lukasz Majewski <l.majewski at samsung.com>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list