[U-Boot] [PATCH] arm: at91: clock: Add the generated clock support

[Wenyou Yang]

Some peripherals may need a second clock source that may be different
from the system clock. This second clock is the generated clock (GCK)
and is managed by the PMC via PMC_PCR.

For simplicity, the source of the GCK is fixed to PLLA_CLK.

Signed-off-by: Wenyou Yang <wenyou.yang at atmel.com>
---

 arch/arm/mach-at91/armv7/clock.c           |   57 ++++++++++++++++++++++++++++
 arch/arm/mach-at91/include/mach/at91_pmc.h |   13 +++++++
 arch/arm/mach-at91/include/mach/clk.h      |    3 ++
 3 files changed, 73 insertions(+)

diff --git a/arch/arm/mach-at91/armv7/clock.c b/arch/arm/mach-at91/armv7/clock.c
index 0bf453e..84418a3 100644
--- a/arch/arm/mach-at91/armv7/clock.c
+++ b/arch/arm/mach-at91/armv7/clock.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2005 Ivan Kokshaysky
  * Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj at jcrosoft.com>
  * Copyright (C) 2013 Bo Shen <voice.shen at atmel.com>
+ * Copyright (C) 2015 Wenyou Yang <wenyou.yang at atmel.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */
@@ -173,3 +174,59 @@ void at91_periph_clk_disable(int id)
 
 	writel(regval, &pmc->pcr);
 }
+
+void at91_enable_periph_generated_clk(u32 id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return;
+
+	writel(id, &pmc->pcr);
+	regval = readl(&pmc->pcr);
+	regval &= ~AT91_PMC_PCR_GCKCSS;
+	regval &= ~AT91_PMC_PCR_GCKDIV;
+	regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK |
+		  AT91_PMC_PCR_CMD_WRITE |
+		  AT91_PMC_PCR_GCKDIV_(1) |
+		  AT91_PMC_PCR_GCKEN;
+
+	writel(regval, &pmc->pcr);
+
+	while (!(readl(&pmc->sr) & AT91_PMC_GCKRDY))
+		;
+}
+
+u32 at91_get_periph_generated_clk(u32 id)
+{
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	u32 regval, clk_source, div;
+	u32 freq = 0;
+
+	if (id > AT91_PMC_PCR_PID_MASK)
+		return 0;
+
+	writel(id, &pmc->pcr);
+	regval = readl(&pmc->pcr);
+
+	clk_source = regval & AT91_PMC_PCR_GCKCSS;
+	switch (clk_source) {
+	case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
+		freq = CONFIG_SYS_AT91_SLOW_CLOCK;
+		break;
+	case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
+		freq = gd->arch.main_clk_rate_hz;
+		break;
+	case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
+		freq = gd->arch.plla_rate_hz;
+		break;
+	default:
+		break;
+	}
+
+	div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
+	div += 1;
+
+	return freq / div;
+}
diff --git a/arch/arm/mach-at91/include/mach/at91_pmc.h b/arch/arm/mach-at91/include/mach/at91_pmc.h
index 8a3fb94..dcd6e36 100644
--- a/arch/arm/mach-at91/include/mach/at91_pmc.h
+++ b/arch/arm/mach-at91/include/mach/at91_pmc.h
@@ -153,8 +153,20 @@ typedef struct at91_pmc {
 #define AT91_PMC_IXR_MOSCSELS		0x00010000
 
 #define AT91_PMC_PCR_PID_MASK		(0x3f)
+#define AT91_PMC_PCR_GCKCSS		(0x7 << 8)
+#define		AT91_PMC_PCR_GCKCSS_SLOW_CLK	(0x0 << 8)
+#define		AT91_PMC_PCR_GCKCSS_MAIN_CLK	(0x1 << 8)
+#define		AT91_PMC_PCR_GCKCSS_PLLA_CLK	(0x2 << 8)
+#define		AT91_PMC_PCR_GCKCSS_UPLL_CLK	(0x3 << 8)
+#define		AT91_PMC_PCR_GCKCSS_MCK_CLK	(0x4 << 8)
+#define		AT91_PMC_PCR_GCKCSS_AUDIO_CLK	(0x5 << 8)
 #define AT91_PMC_PCR_CMD_WRITE		(0x1 << 12)
+#define AT91_PMC_PCR_DIV		(0x3 << 16)
+#define AT91_PMC_PCR_GCKDIV		(0xff << 20)
+#define		AT91_PMC_PCR_GCKDIV_(x)		((x) << 20)
+#define		AT91_PMC_PCR_GCKDIV_OFFSET	20
 #define AT91_PMC_PCR_EN			(0x1 << 28)
+#define AT91_PMC_PCR_GCKEN		(0x1 << 29)
 
 #define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
 #define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
@@ -236,6 +248,7 @@ typedef struct at91_pmc {
 #define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
 #define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
 #define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_GCKRDY		(1 << 24)
 
 #define		AT91_PMC_PROTKEY	0x504d4301	/* Activation Code */
 #endif
diff --git a/arch/arm/mach-at91/include/mach/clk.h b/arch/arm/mach-at91/include/mach/clk.h
index 1d45e2d..dd1ed96 100644
--- a/arch/arm/mach-at91/include/mach/clk.h
+++ b/arch/arm/mach-at91/include/mach/clk.h
@@ -119,4 +119,7 @@ static inline unsigned long get_pit_clk_rate(void)
 int at91_clock_init(unsigned long main_clock);
 void at91_periph_clk_enable(int id);
 void at91_periph_clk_disable(int id);
+void at91_enable_periph_generated_clk(u32 id);
+u32 at91_get_periph_generated_clk(u32 id);
+
 #endif /* __ASM_ARM_ARCH_CLK_H__ */
-- 
1.7.9.5