[U-Boot] [PATCH 2/4] spi: cadence_qspi: Fix fdt read of spi-max-frequency

[Marek Vasut]

On Tuesday, September 08, 2015 at 03:18:24 AM, Chin Liang See wrote:
> Fix the fdt read for spi-max-frequency as it's contained
> in the child node. Current state of code is always
> returning default value.
> 
> Signed-off-by: Chin Liang See <clsee at altera.com>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Dinh Nguyen <dinh.linux at gmail.com>
> Cc: Marek Vasut <marex at denx.de>
> Cc: Stefan Roese <sr at denx.de>
> Cc: Vikas Manocha <vikas.manocha at st.com>
> Cc: Jagannadh Teki <jteki at openedev.com>
> Cc: Pavel Machek <pavel at denx.de>
> ---
> Changes for v2
> - Add unsigned casting for plat->max_hz
> ---
>  drivers/spi/cadence_qspi.c |    8 ++++----
>  1 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/spi/cadence_qspi.c b/drivers/spi/cadence_qspi.c
> index 23c88d5..8c0f7dd 100644
> --- a/drivers/spi/cadence_qspi.c
> +++ b/drivers/spi/cadence_qspi.c
> @@ -296,10 +296,6 @@ static int cadence_spi_ofdata_to_platdata(struct
> udevice *bus) plat->regbase = (void *)data[0];
>  	plat->ahbbase = (void *)data[2];
> 
> -	/* Use 500KHz as a suitable default */
> -	plat->max_hz = fdtdec_get_int(blob, node, "spi-max-frequency",
> -				      500000);
> -
>  	/* All other paramters are embedded in the child node */
>  	subnode = fdt_first_subnode(blob, node);
>  	if (subnode < 0) {
> @@ -307,6 +303,10 @@ static int cadence_spi_ofdata_to_platdata(struct
> udevice *bus) return -ENODEV;
>  	}
> 
> +	/* Use 500KHz as a suitable default */
> +	plat->max_hz = (unsigned int)fdtdec_get_int(blob, subnode,
> +						"spi-max-frequency", 500000);
> +

fdt_getprop_u32() might be the right thing to do here :)

Best regards,
Marek Vasut