[U-Boot] [PATCH v2 1/8] ARM: hikey: Update README with various corrections

Peter Griffin peter.griffin at linaro.org
Thu Sep 10 22:55:11 CEST 2015


The README had a few mistakes, and one of the URL's
had changed. Also update the boot log with the latest
boot trace from ATF, which now includes the mcuimage.bin.

Signed-off-by: Peter Griffin <peter.griffin at linaro.org>
---
 board/hisilicon/hikey/README | 197 ++++++++++++++++++++++++++++++++-----------
 1 file changed, 147 insertions(+), 50 deletions(-)

diff --git a/board/hisilicon/hikey/README b/board/hisilicon/hikey/README
index 25c8143..36adbdb 100644
--- a/board/hisilicon/hikey/README
+++ b/board/hisilicon/hikey/README
@@ -25,8 +25,12 @@ Currently the u-boot port supports: -
 Compile u-boot
 ==============
 
-make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
-make CROSS_COMPILE=aarch64-linux-gnu-
+  > mkdir -p ./aarch64/bin
+  > cd ./aarch64
+  > git clone http://git.denx.de/u-boot.git
+  > make CROSS_COMPILE=aarch64-linux-gnu- hikey_config
+  > make CROSS_COMPILE=aarch64-linux-gnu-
+  > cp u-boot.bin ./aarch64/bin/u-boot-hikey.bin
 
 ARM Trusted Firmware (ATF) & l-loader
 =====================================
@@ -34,27 +38,34 @@ ARM Trusted Firmware (ATF) & l-loader
 This u-boot port has been tested with l-loader, booting ATF, which then boots
 u-boot as the bl33.bin executable.
 
+Get the BL30 mcu binary.
+  > wget -P aarch64/bin https://builds.96boards.org/releases/hikey/linaro/binaries/15.05/mcuimage.bin
+
 1. Get ATF source code
-git clone https://github.com/96boards/arm-trusted-firmware.git
+  > cd ./aarch64
+  > git clone https://github.com/96boards/arm-trusted-firmware.git
+  > cd ./arm-trusted-firmware
 
-2. Compile ATF I use the makefile here
-http://people.linaro.org/~peter.griffin/hikey/hikey-u-boot-release_r1/build-tf.mak
+2. Compile ATF, I use the build-tf.mak in the directory with this README, and copy it to ATF directory
+  > cp ../u-boot/board/hisilicon/hikey/build-tf.mak .
+  > make -f  build-tf.mak build
 
 3. Get l-loader
-git clone https://github.com/96boards/l-loader.git
-
-4. Make sym links to ATF bip / fip binaries
-ln -s /home/griffinp/aarch64/bl1-hikey.bin bl1.bin
-ln -s /home/griffinp/aarch64/fip-hikey.bin fip.bin
+  > cd ../
+  > git clone https://github.com/96boards/l-loader.git
+  > cd ./l-loader
 
-arm-linux-gnueabihf-gcc -c -o start.o start.S
-arm-linux-gnueabihf-gcc -c -o debug.o debug.S
-arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader
-arm-linux-gnueabihf-objcopy -O binary loader temp
+4. Make sym links to ATF bl1 / fip binaries
+  > ln -s ../bin/bl1-hikey.bin bl1.bin
+  > ln -s ../bin/fip-hikey.bin fip.bin
 
-python gen_loader.py -o l-loader.bin --img_loader=temp --img_bl1=bl1.bin
-sudo bash -x generate_ptable.sh
-python gen_loader.py -o ptable.img --img_prm_ptable=prm_ptable.img --img_sec_ptable=sec_ptable.img
+  > arm-linux-gnueabihf-gcc -c -o start.o start.S
+  > arm-linux-gnueabihf-gcc -c -o debug.o debug.S
+  > arm-linux-gnueabihf-ld -Bstatic -Tl-loader.lds -Ttext 0xf9800800 start.o debug.o -o loader
+  > arm-linux-gnueabihf-objcopy -O binary loader temp
+  > python gen_loader.py -o ../bin/l-loader.bin --img_loader=temp --img_bl1=bl1.bin
+  > sudo bash -x generate_ptable.sh
+  > python gen_loader.py -o ../bin/ptable.img --img_prm_ptable=./prm_ptable.img --img_sec_ptable=./sec_ptable.img
 
 These instructions are adapted from
 https://github.com/96boards/documentation/wiki/HiKeyUEFI
@@ -62,37 +73,49 @@ https://github.com/96boards/documentation/wiki/HiKeyUEFI
 FLASHING
 ========
 
-1. Connect jumper J2 to go into recovery mode and flash l-loader.bin with
-   fastboot using the hisi-idt.py utility
+1. Connect the second jumper on J15 BOOT SEL, to go into recovery mode and flash l-loader.bin with
+fastboot using the hisi-idt.py utility.
+
+  > cd ../
+  > git clone https://github.com/96boards/burn-boot.git
 
-> git clone https://github.com/96boards/burn-boot.git
-> sudo python /home/griffinp/Software/hikey/burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=/tmp/l-loader.bin
+The command below assumes HiKey enumerated as the first USB serial port
+  > sudo ./burn-boot/hisi-idt.py -d /dev/ttyUSB0 --img1=./bin/l-loader.bin
 
-2. Once LED 0 comes on solid, it should be detected as a fastboot device
-   (on some boards I've found this to be unreliable)
+2. Once LED 0 comes on solid, it should be detected as a fastboot device by plugging a USB A to mini B
+   cable from your PC to the USB OTG port of HiKey (on some boards I've found this to be unreliable).
 
-sudo fastboot devices
+  > sudo fastboot devices
+
+0123456789ABCDEF	fastboot
 
 3. Flash the images
-wget https://builds.96boards.org/releases/hikey/nvme.img
-sudo fastboot flash ptable ptable.img
-sudo fastboot flash fastboot fip.bin
-sudo fastboot flash nvme nvme.img
+  > wget -P aarch64/bin wget https://builds.96boards.org/releases/hikey/linaro/binaries/latest/nvme.img
+  > sudo fastboot flash ptable ./bin/ptable.img
+  > sudo fastboot flash fastboot ./bin/fip-hikey.bin
+  > sudo fastboot flash nvme ./bin/nvme.img
 
-4. Disconnect jumper J2, and reset the board and you will now (hopefully)
+4. Disconnect second jumper on J15 BOOT SEL, and reset the board and you will now (hopefully)
    have ATF, booting u-boot from eMMC. On 'new' boards I've had to do the
    flashing twice in the past to avoid an ATF error.
 
+   Note: To get USB host working, also disconnect the USB OTG cable used for flashing. Otherwise you
+   will get 'dwc_otg_core_host_init: Timeout!' errors.
+
 See working boot trace below: -
 
-debug EMMC boot: print init OK
 debug EMMC boot: send RST_N .
 debug EMMC boot: start eMMC boot......
 load fastboot1!
+
 Switch to aarch64 mode. CPU0 executes at 0xf9801000!
+
+INFO:    BL1: 0xf9810000 - 0xf9817000 [size = 28672]
 NOTICE:  Booting Trusted Firmware
-NOTICE:  BL1: v1.1(release):a0c0399
-NOTICE:  BL1: Built : 13:23:48, May 22 2015
+NOTICE:  BL1: v1.1(debug):e8b7174
+NOTICE:  BL1: Built : 19:16:44, Sep  8 2015
+INFO:    BL1: RAM 0xf9810000 - 0xf9817000
+NOTICE:  syspll frequency:1190494208Hz
 NOTICE:  succeed to init lpddr3 rank0 dram phy
 INFO:    lpddr3_freq_init, set ddrc 533mhz
 INFO:    init ddr3 rank0
@@ -101,7 +124,14 @@ INFO:    lpddr3_freq_init, set ddrc 800mhz
 INFO:    init ddr3 rank0
 INFO:    ddr3 rank1 init pass
 INFO:    Elpida DDR
+INFO:    ddr test value:0xa5a55a5a
+INFO:    Hisilicon HiKey platform is initialized
+INFO:    Using FIP
+INFO:    Loading file 'bl2.bin' at address 0xf9818000
+INFO:    File 'bl2.bin' loaded: 0xf9818000 - 0xf9821100
 NOTICE:  BL1: Booting BL2
+INFO:    BL1: BL2 address = 0xf9818000
+INFO:    BL1: BL2 spsr = 0x3c5
 INFO:    [BDID] [fff91c18] midr: 0x410fd033
 INFO:    [BDID] [fff91c1c] board type: 0
 INFO:    [BDID] [fff91c20] board id: 0x2b
@@ -112,24 +142,78 @@ INFO:    acpu_dvfs_set_freq: support freq num is 5
 INFO:    acpu_dvfs_set_freq: start prof is 0x4
 INFO:    acpu_dvfs_set_freq: magic is 0x5a5ac5c5
 INFO:    acpu_dvfs_set_freq: voltage:
-INFO:      - 0: 0x3a
-INFO:      - 1: 0x3a
-INFO:      - 2: 0x4a
-INFO:      - 3: 0x5b
-INFO:      - 4: 0x6b
-NOTICE:  acpu_dvfs_set_freq: set acpu freq success!NOTICE:  BL2: v1.1(debug):a0c0399
-NOTICE:  BL2: Built : 10:19:28, May 27 2015
+INFO:      - 0: 0x49
+INFO:      - 1: 0x49
+INFO:      - 2: 0x50
+INFO:      - 3: 0x60
+INFO:      - 4: 0x78
+NOTICE:  acpu_dvfs_set_freq: set acpu freq success!NOTICE:  BL2: v1.1(debug):e8b7174
+NOTICE:  BL2: Built : 19:16:46, Sep  8 2015
 INFO:    BL2: Loading BL3-0
 INFO:    Using FIP
-WARNING: Failed to access image 'bl30.bin' (-1)
-ERROR:   Failed to load BL3-0 (-1)
-ERROR:   Please burn mcu image:
-ERROR:     sudo fastboot flash mcuimage mcuimage.bin
+INFO:    Loading file 'bl30.bin' at address 0x1000000
+INFO:    Skip reserving memory: 0x1000000 - 0x1023270
+INFO:    File 'bl30.bin' loaded: 0x1000000 - 0x1023270
+INFO:    bl2_plat_handle_bl30: [1000000] 3a334d43 34313032 2f38302f 30203133
+INFO:    bl2_plat_handle_bl30: [10000c8] 0 0 b 0
+INFO:    bl2_plat_handle_bl30: [1000190] 17 0 0 0
+INFO:    bl2_plat_handle_bl30: [1023260] 0 0 0 0
+INFO:    hisi_mcu_load_image: mcu sections 0:
+INFO:    hisi_mcu_load_image:  src  = 0x1000200
+INFO:    hisi_mcu_load_image:  dst  = 0xf6000000
+INFO:    hisi_mcu_load_image:  size = 512
+INFO:    hisi_mcu_load_image:  [SRC 0x1000200] 0x7600 0x201 0x1eae1 0x1ea71
+INFO:    hisi_mcu_load_image:  [DST 0xf6000000] 0x7600 0x201 0x1eae1 0x1ea71
+INFO:    hisi_mcu_load_image: mcu sections 1:
+INFO:    hisi_mcu_load_image:  src  = 0x1000400
+INFO:    hisi_mcu_load_image:  dst  = 0xf6000200
+INFO:    hisi_mcu_load_image:  size = 27828
+INFO:    hisi_mcu_load_image:  [SRC 0x1000400] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
+INFO:    hisi_mcu_load_image:  [DST 0xf6000200] 0xbf00bf00 0x4815b672 0x48154780 0x60014915
+INFO:    hisi_mcu_load_image: mcu sections 2:
+INFO:    hisi_mcu_load_image:  src  = 0x10070b4
+INFO:    hisi_mcu_load_image:  dst  = 0xf6007200
+INFO:    hisi_mcu_load_image:  size = 1024
+INFO:    hisi_mcu_load_image:  [SRC 0x10070b4] 0x55 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image:  [DST 0xf6007200] 0x55 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image: mcu sections 3:
+INFO:    hisi_mcu_load_image:  src  = 0x10074b4
+INFO:    hisi_mcu_load_image:  dst  = 0xfff8e000
+INFO:    hisi_mcu_load_image:  size = 12704
+INFO:    hisi_mcu_load_image:  [SRC 0x10074b4] 0x55 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image:  [DST 0xfff8e000] 0x55 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image: mcu sections 4:
+INFO:    hisi_mcu_load_image:  src  = 0x100a654
+INFO:    hisi_mcu_load_image:  dst  = 0x5e00000
+INFO:    hisi_mcu_load_image:  size = 82912
+INFO:    hisi_mcu_load_image:  [SRC 0x100a654] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
+INFO:    hisi_mcu_load_image:  [DST 0x5e00000] 0x4ff0e92d 0x2cc5f645 0x2600b0ab 0x2c7cf6c0
+INFO:    hisi_mcu_load_image: mcu sections 5:
+INFO:    hisi_mcu_load_image:  src  = 0x101ea34
+INFO:    hisi_mcu_load_image:  dst  = 0x5e143e0
+INFO:    hisi_mcu_load_image:  size = 12816
+INFO:    hisi_mcu_load_image:  [SRC 0x101ea34] 0x33323130 0x37363534 0x42413938 0x46454443
+INFO:    hisi_mcu_load_image:  [DST 0x5e143e0] 0x33323130 0x37363534 0x42413938 0x46454443
+INFO:    hisi_mcu_load_image: mcu sections 6:
+INFO:    hisi_mcu_load_image:  src  = 0x1021c44
+INFO:    hisi_mcu_load_image:  dst  = 0x5e1c1d0
+INFO:    hisi_mcu_load_image:  size = 3060
+INFO:    hisi_mcu_load_image:  [SRC 0x1021c44] 0x0 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image:  [DST 0x5e1c1d0] 0x0 0x0 0x0 0x0
+INFO:    hisi_mcu_load_image: mcu sections 7:
+INFO:    hisi_mcu_load_image:  src  = 0x1022838
+INFO:    hisi_mcu_load_image:  dst  = 0x5e1cdc4
+INFO:    hisi_mcu_load_image:  size = 2616
+INFO:    hisi_mcu_load_image:  [SRC 0x1022838] 0xf80000a0 0x0 0xf80000ac 0x0
+INFO:    hisi_mcu_load_image:  [DST 0x5e1cdc4] 0xf80000a0 0x0 0xf80000ac 0x0
+INFO:    hisi_mcu_start_run: AO_SC_SYS_CTRL2=0
+INFO:    bl2_plat_handle_bl30: mcu pc is 42933301
+INFO:    bl2_plat_handle_bl30: AO_SC_PERIPH_CLKSTAT4	is 39018f09
 INFO:    BL2: TrustZone: protecting 16777216 bytes of memory at 0x3f000000
 INFO:    BL2: Loading BL3-1
 INFO:    Using FIP
 INFO:    Loading file 'bl31.bin' at address 0xf9858000
-INFO:    File 'bl31.bin' loaded: 0xf9858000 - 0xf9860010
+INFO:    File 'bl31.bin' loaded: 0xf9858000 - 0xf9861010
 INFO:    BL2: Loading BL3-2
 INFO:    Using FIP
 WARNING: Failed to access image 'bl32.bin' (-1)
@@ -137,24 +221,37 @@ WARNING: Failed to load BL3-2 (-1)
 INFO:    BL2: Loading BL3-3
 INFO:    Using FIP
 INFO:    Loading file 'bl33.bin' at address 0x35000000
-INFO:    File 'bl33.bin' loaded: 0x35000000 - 0x35042938
+INFO:    File 'bl33.bin' loaded: 0x35000000 - 0x3504c468
 NOTICE:  BL1: Booting BL3-1
-NOTICE:  BL3-1: v1.1(debug):a0c0399
-NOTICE:  BL3-1: Built : 10:19:31, May 27 2015
+INFO:    BL1: BL3-1 address = 0xf9858000
+INFO:    BL1: BL3-1 spsr = 0x3cd
+INFO:    BL1: BL3-1 params address = 0xf9821920
+INFO:    BL1: BL3-1 plat params address = 0x0
+NOTICE:  BL3-1: v1.1(debug):e8b7174
+NOTICE:  BL3-1: Built : 19:16:49, Sep  8 2015
 INFO:    BL3-1: Initializing runtime services
 INFO:    BL3-1: Preparing for EL3 exit to normal world
 INFO:    BL3-1: Next image address = 0x35000000
 INFO:    BL3-1: Next image spsr = 0x3c9
 
-
-U-Boot 2015.04-00007-g1b3d379-dirty (May 27 2015 - 10:18:16) hikey
+U-Boot 2015.10-rc2 (Sep 08 2015 - 20:29:33 +0100)hikey
 
 DRAM:  1008 MiB
-MMC:   sd_card_detect: SD card present
+HI6553 PMIC init
+MMC:   config_sd_carddetect: SD card not present
 HiKey DWMMC: 0, HiKey DWMMC: 1
+Card did not respond to voltage select!
+** Bad device mmc 1 **
+Using default environment
+
 In:    serial
 Out:   serial
 Err:   serial
 Net:   Net Initialization Skipped
 No ethernet found.
 Hit any key to stop autoboot:  0
+starting USB...
+USB0:   Core Release: 3.00a
+scanning bus 0 for devices... 2 USB Device(s) found
+       scanning usb for storage devices... 0 Storage Device(s) found
+       scanning usb for ethernet devices... 0 Ethernet Device(s) found
-- 
1.9.1



More information about the U-Boot mailing list