[U-Boot] [PATCH] imximage: fix commands other than write_data
Stefano Babic
sbabic at denx.de
Sun Sep 20 10:59:42 CEST 2015
Hi Troy,
On 15/09/2015 03:06, Troy Kisky wrote:
> When CHECK_BITS_SET was added, they forgot to add
> a new command table, and instead overwrote the
> previous table.
>
> Signed-off-by: Troy Kisky <troy.kisky at boundarydevices.com>
>
> ---
>
This patch breaks building boards with SPL:
Building current source for 85 boards (6 threads, 1 job per thread)
arm: + colibri_vf_dtb
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [u-boot-dtb.imx] Error 1
+make[1]: *** [u-boot-dtb.imx] Error 2
+make: *** [sub-make] Error 2
arm: + mx6sabresd_spl
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [SPL] Error 1
+make[1]: *** [SPL] Error 2
+make: *** [sub-make] Error 2
arm: + colibri_vf
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [u-boot.imx] Error 1
+make[1]: *** [u-boot.imx] Error 2
+make: *** [sub-make] Error 2
arm: + vf610twr
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [u-boot.imx] Error 1
+make[1]: *** [u-boot.imx] Error 2
+make: *** [sub-make] Error 2
arm: + cm_fx6
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [SPL] Error 1
+make[1]: *** [SPL] Error 2
+make: *** [sub-make] Error 2
arm: + vf610twr_nand
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [u-boot.imx] Error 1
+make[1]: *** [u-boot.imx] Error 2
+make: *** [sub-make] Error 2
arm: + mx6cuboxi
+Error: Image corrupt DCD size 536870911 exceed maximum 220
+make[2]: *** [SPL] Error 1
+make[1]: *** [SPL] Error 2
+make: *** [sub-make] Error 2
Can you take a look ? Thanks !
Best regards,
Stefano Babic
> Note: this needs tested to make sure imx7dsabresd still boots
> as its dcd header has changed
>
>
> diff --git a/tools/imximage.c b/tools/imximage.c
> index 0da48a7..97a6880 100644
> --- a/tools/imximage.c
> +++ b/tools/imximage.c
> @@ -160,54 +160,80 @@ static void set_dcd_val_v1(struct imx_header *imxhdr, char *name, int lineno,
> }
> }
>
> +static struct dcd_v2_cmd *gd_last_cmd;
> +
> static void set_dcd_param_v2(struct imx_header *imxhdr, uint32_t dcd_len,
> int32_t cmd)
> {
> dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
> + struct dcd_v2_cmd *d = gd_last_cmd;
> + struct dcd_v2_cmd *d2;
> + int len;
> +
> + if (!d)
> + d = &dcd_v2->dcd_cmd;
> + d2 = d;
> + len = be16_to_cpu(d->write_dcd_command.length);
> + if (len > 4)
> + d2 = (struct dcd_v2_cmd *)(((char *)d) + len);
>
> switch (cmd) {
> case CMD_WRITE_DATA:
> - dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> - dcd_v2->write_dcd_command.length = cpu_to_be16(
> - dcd_len * sizeof(dcd_addr_data_t) + 4);
> - dcd_v2->write_dcd_command.param = DCD_WRITE_DATA_PARAM;
> + if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) &&
> + (d->write_dcd_command.param == DCD_WRITE_DATA_PARAM))
> + break;
> + d = d2;
> + d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> + d->write_dcd_command.length = cpu_to_be16(4);
> + d->write_dcd_command.param = DCD_WRITE_DATA_PARAM;
> break;
> case CMD_WRITE_CLR_BIT:
> - dcd_v2->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> - dcd_v2->write_dcd_command.length = cpu_to_be16(
> - dcd_len * sizeof(dcd_addr_data_t) + 4);
> - dcd_v2->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM;
> + if ((d->write_dcd_command.tag == DCD_WRITE_DATA_COMMAND_TAG) &&
> + (d->write_dcd_command.param == DCD_WRITE_CLR_BIT_PARAM))
> + break;
> + d = d2;
> + d->write_dcd_command.tag = DCD_WRITE_DATA_COMMAND_TAG;
> + d->write_dcd_command.length = cpu_to_be16(4);
> + d->write_dcd_command.param = DCD_WRITE_CLR_BIT_PARAM;
> break;
> /*
> * Check data command only supports one entry,
> - * so use 0xC = size(address + value + command).
> */
> case CMD_CHECK_BITS_SET:
> - dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> - dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
> - dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> + d = d2;
> + d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> + d->write_dcd_command.length = cpu_to_be16(4);
> + d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> break;
> case CMD_CHECK_BITS_CLR:
> - dcd_v2->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> - dcd_v2->write_dcd_command.length = cpu_to_be16(0xC);
> - dcd_v2->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> + d = d2;
> + d->write_dcd_command.tag = DCD_CHECK_DATA_COMMAND_TAG;
> + d->write_dcd_command.length = cpu_to_be16(4);
> + d->write_dcd_command.param = DCD_CHECK_BITS_SET_PARAM;
> break;
> default:
> break;
> }
> + gd_last_cmd = d;
> }
>
> static void set_dcd_val_v2(struct imx_header *imxhdr, char *name, int lineno,
> int fld, uint32_t value, uint32_t off)
> {
> - dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
> + struct dcd_v2_cmd *d = gd_last_cmd;
> + int len;
> +
> + len = be16_to_cpu(d->write_dcd_command.length);
> + off = (len - 4) >> 3;
>
> switch (fld) {
> case CFG_REG_ADDRESS:
> - dcd_v2->addr_data[off].addr = cpu_to_be32(value);
> + d->addr_data[off].addr = cpu_to_be32(value);
> break;
> case CFG_REG_VALUE:
> - dcd_v2->addr_data[off].value = cpu_to_be32(value);
> + d->addr_data[off].value = cpu_to_be32(value);
> + off++;
> + d->write_dcd_command.length = cpu_to_be16((off << 3) + 4);
> break;
> default:
> break;
> @@ -236,12 +262,20 @@ static void set_dcd_rst_v2(struct imx_header *imxhdr, uint32_t dcd_len,
> char *name, int lineno)
> {
> dcd_v2_t *dcd_v2 = &imxhdr->header.hdr_v2.dcd_table;
> + struct dcd_v2_cmd *d = gd_last_cmd;
> + int len;
> +
> + if (!d)
> + d = &dcd_v2->dcd_cmd;
> + len = be16_to_cpu(d->write_dcd_command.length);
> + if (len > 4)
> + d = (struct dcd_v2_cmd *)(((char *)d) + len);
> +
> + len = (char *)d - (char *)&dcd_v2->header;
>
> dcd_v2->header.tag = DCD_HEADER_TAG;
> - dcd_v2->header.length = cpu_to_be16(
> - dcd_len * sizeof(dcd_addr_data_t) + 8);
> + dcd_v2->header.length = cpu_to_be16(len);
> dcd_v2->header.version = DCD_VERSION;
> - set_dcd_param_v2(imxhdr, dcd_len, CMD_WRITE_DATA);
> }
>
> static void set_imx_hdr_v1(struct imx_header *imxhdr, uint32_t dcd_len,
> @@ -314,6 +348,7 @@ static void set_hdr_func(void)
> max_dcd_entries = MAX_HW_CFG_SIZE_V1;
> break;
> case IMXIMAGE_V2:
> + gd_last_cmd = NULL;
> set_dcd_val = set_dcd_val_v2;
> set_dcd_param = set_dcd_param_v2;
> set_dcd_rst = set_dcd_rst_v2;
> diff --git a/tools/imximage.h b/tools/imximage.h
> index d41c74f..c7b9b5c 100644
> --- a/tools/imximage.h
> +++ b/tools/imximage.h
> @@ -133,10 +133,14 @@ typedef struct {
> uint8_t param;
> } __attribute__((packed)) write_dcd_command_t;
>
> -typedef struct {
> - ivt_header_t header;
> +struct dcd_v2_cmd {
> write_dcd_command_t write_dcd_command;
> dcd_addr_data_t addr_data[MAX_HW_CFG_SIZE_V2];
> +};
> +
> +typedef struct {
> + ivt_header_t header;
> + struct dcd_v2_cmd dcd_cmd;
> uint32_t padding[1]; /* end up on an 8-byte boundary */
> } dcd_v2_t;
>
>
--
=====================================================================
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================
More information about the U-Boot
mailing list