[U-Boot] [PATCH v3 1/9] net: Revert "tftp: adjust settings to be suitable for 100Mbit ethernet"
Bin Meng
bmeng.cn at gmail.com
Tue Sep 8 12:21:40 CEST 2015
Hi Hannes,
On Tue, Sep 8, 2015 at 6:13 PM, Hannes Schmelzer <hannes at schmelzer.or.at> wrote:
> Hi,
>
> what about:
> https://patchwork.ozlabs.org/patch/510476/
>
> best regards,
> Hannes
>
>
The patch you mentioned does not completely revert the changes. It was
a mix of partial revert plus previous tftp timeout changes. I believe
Pavel will need to work out a proper patch to resolve the tftp timeout
issue he sees in his network environment. But that is for the next
release (v2016.01), not for this release.
>
> On 08.09.2015 11:23, Heiko Schocher wrote:
>>
>> Hello Bin,
>>
>> Am 28.08.2015 um 07:25 schrieb Bin Meng:
>>>
>>> Commit 620776d "tftp: adjust settings to be suitable for 100Mbit
>>> ethernet"
>>> causes the following error message when trying to load a file using
>>> 'tftp'
>>> command via a tftp server.
>>>
>>> TFTP error: 'Unsupported option(s) requested' (8)
>>>
>>> This is due to with commit 620776d changes, the tftp option 'timeout'
>>> value is now set to zero which is an invalid value as per RFC2349 [1].
>>> Valid values range between "1" and "255" seconds, inclusive. With some
>>> tftp servers that strictly implement the RFC requirement, it reports
>>> such an error message.
>>>
>>> Revert commit 620776d for RFC compliance.
>>>
>>> [1] https://www.ietf.org/rfc/rfc2349.txt
>>>
>>> Signed-off-by: Bin Meng <bmeng.cn at gmail.com>
>>> Acked-by: Joe Hershberger <joe.hershberger at ni.com>
>>
>>
>> Just tried current mainline on the smartweb board, and had the
>> same issue. Your patch fixed it, thanks!
>>
>> Tested-by: Heiko Schocher <hs at denx.de>
>>
>> bye,
>> Heiko
>>>
>>>
>>> ---
>>>
>>> Changes in v3:
>>> - Drop e1000 build warning patch which is already applied
>>>
>>> Changes in v2:
>>> - Rewrite the commit message to mention RFC2349
>>>
>>> net/tftp.c | 10 +++++-----
>>> 1 file changed, 5 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/net/tftp.c b/net/tftp.c
>>> index 18ce84c..89be32a 100644
>>> --- a/net/tftp.c
>>> +++ b/net/tftp.c
>>> @@ -19,10 +19,10 @@
>>> /* Well known TFTP port # */
>>> #define WELL_KNOWN_PORT 69
>>> /* Millisecs to timeout for lost pkt */
>>> -#define TIMEOUT 100UL
>>> +#define TIMEOUT 5000UL
>>> #ifndef CONFIG_NET_RETRY_COUNT
>>> /* # of timeouts before giving up */
>>> -# define TIMEOUT_COUNT 1000
>>> +# define TIMEOUT_COUNT 10
>>> #else
>>> # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2)
>>> #endif
>>> @@ -711,10 +711,10 @@ void tftp_start(enum proto_t protocol)
>>> if (ep != NULL)
>>> timeout_ms = simple_strtol(ep, NULL, 10);
>>>
>>> - if (timeout_ms < 10) {
>>> - printf("TFTP timeout (%ld ms) too low, set min = 10 ms\n",
>>> + if (timeout_ms < 1000) {
>>> + printf("TFTP timeout (%ld ms) too low, set min = 1000 ms\n",
>>> timeout_ms);
>>> - timeout_ms = 10;
>>> + timeout_ms = 1000;
>>> }
>>>
>>> debug("TFTP blocksize = %i, timeout = %ld ms\n",
>>>
>>
>
Regards,
Bin
More information about the U-Boot
mailing list