[U-Boot] [PATCH v3 06/13] sf: Update status reg check in spi_flash_cmd_wait_ready

Jagan Teki jteki at openedev.com
Wed Sep 2 08:09:50 CEST 2015


Current flash wait_ready logic is not modular to add new
register status check, hence updated the status check for
adding few more register checks in future.

Below are the sf speed runs with 'sf update' on whole flash, 16MiB.

=> sf update 0x100 0x0 0x1000000
device 0 whole chip
16777216 bytes written, 0 bytes skipped in 59.564s, speed 289262 B/s

=> sf update 0x100 0x0 0x1000000
device 0 whole chip
16777216 bytes written, 0 bytes skipped in 62.549s, speed 275036 B/s

=> sf update 0x100 0x0 0x1000000
device 0 whole chip
16777216 bytes written, 0 bytes skipped in 61.276s, speed 284359 B/s

Signed-off-by: Jagan Teki <jteki at openedev.com>
Cc: Simon Glass <sjg at chromium.org>
Cc: Marek Vasut <marex at denx.de>
Cc: Michal Simek <michal.simek at xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Cc: Stefan Roese <sr at denx.de>
Cc: Tom Warren <twarren at nvidia.com>
Cc: Bin Meng <bmeng.cn at gmail.com>
Cc: Tom Rini <trini at konsulko.com>
Tested-by: Jagan Teki <jteki at openedev.com>
---
Changes for v3:
	- none
Changes for v2:
	- Remove unneeded comments.

 drivers/mtd/spi/sf_ops.c | 70 +++++++++---------------------------------------
 1 file changed, 12 insertions(+), 58 deletions(-)

diff --git a/drivers/mtd/spi/sf_ops.c b/drivers/mtd/spi/sf_ops.c
index 6e457ec..c1cdde7 100644
--- a/drivers/mtd/spi/sf_ops.c
+++ b/drivers/mtd/spi/sf_ops.c
@@ -139,72 +139,26 @@ static void spi_flash_dual_flash(struct spi_flash *flash, u32 *addr)
 }
 #endif
 
-static int spi_flash_poll_status(struct spi_slave *spi, unsigned long timeout,
-				 u8 cmd, u8 poll_bit)
-{
-	unsigned long timebase;
-	unsigned long flags = SPI_XFER_BEGIN;
-	int ret;
-	u8 status;
-	u8 check_status = 0x0;
-
-	if (cmd == CMD_FLAG_STATUS)
-		check_status = poll_bit;
-
-#ifdef CONFIG_SF_DUAL_FLASH
-	if (spi->flags & SPI_XFER_U_PAGE)
-		flags |= SPI_XFER_U_PAGE;
-#endif
-	ret = spi_xfer(spi, 8, &cmd, NULL, flags);
-	if (ret) {
-		debug("SF: fail to read %s status register\n",
-		      cmd == CMD_READ_STATUS ? "read" : "flag");
-		return ret;
-	}
-
-	timebase = get_timer(0);
-	do {
-		WATCHDOG_RESET();
-
-		ret = spi_xfer(spi, 8, NULL, &status, 0);
-		if (ret)
-			return -1;
-
-		if ((status & poll_bit) == check_status)
-			break;
-
-	} while (get_timer(timebase) < timeout);
-
-	spi_xfer(spi, 0, NULL, NULL, SPI_XFER_END);
-
-	if ((status & poll_bit) == check_status)
-		return 0;
-
-	/* Timed out */
-	debug("SF: time out!\n");
-	return -1;
-}
-
 int spi_flash_cmd_wait_ready(struct spi_flash *flash, unsigned long timeout)
 {
-	struct spi_slave *spi = flash->spi;
-	int ret;
-	u8 poll_bit = STATUS_WIP;
-	u8 cmd = CMD_READ_STATUS;
+	int timebase, ret, sr;
 
-	ret = spi_flash_poll_status(spi, timeout, cmd, poll_bit);
-	if (ret < 0)
-		return ret;
+	timebase = get_timer(0);
 
-	if (flash->poll_cmd == CMD_FLAG_STATUS) {
-		poll_bit = STATUS_PEC;
-		cmd = CMD_FLAG_STATUS;
-		ret = spi_flash_poll_status(spi, timeout, cmd, poll_bit);
+	while (get_timer(timebase) < timeout) {
+		ret = spi_flash_cmd_read_status(flash, &sr);
 		if (ret < 0)
 			return ret;
+
+		if (sr < 0)
+			break;
+		else if (!(sr & STATUS_WIP))
+			return 0;
 	}
 
-	return 0;
+	printf("SF: Timeout!\n");
+
+	return -ETIMEDOUT;
 }
 
 int spi_flash_write_common(struct spi_flash *flash, const u8 *cmd,
-- 
1.9.1



More information about the U-Boot mailing list