[U-Boot] Pull-request: u-boot-spi/master

[Jagan Teki]

Hi Tom,

Zynq patches has SPL build dependency with Simon changes [1].

Simon, Any plan to send a PR for your changes.

[1] http://git.denx.de/?p=u-boot/u-boot-dm.git;a=shortlog;h=refs/heads/zynq-working

thanks!
Jagan.

The following changes since commit 850f788709cef8f7d53d571aec3bfb73b14c5531:

  Merge branch 'rmobile' of git://git.denx.de/u-boot-sh (2015-09-13 17:25:16 -0400)

are available in the git repository at:


  git://git.denx.de/u-boot-spi.git master

for you to fetch changes up to a63981e1727139c51f05d3fa1cb1b299d2c00a7d:

  zynq-common: Add SPL SPI offset, size configs (2015-09-15 13:31:44 +0530)

----------------------------------------------------------------
Jagan Teki (23):
      spi: Add zynq qspi controller driver
      dts: zynq: Add zynq qspi controller nodes
      doc: device-tree-bindings: spi: Add zynq qspi info
      dts: microzed: Enable zynq qspi controller node
      dts: zc702: Enable zynq qspi controller node
      dts: zc706: Enable zynq qspi controller node
      dts: zc770-xm010: Enable zynq qspi controller node
      dts: zed: Enable zynq qspi controller node
      configs: Enable legacy SPI flash interface support
      zynq-common: Enable zynq qspi controller support
      zynq-common: Enable Bank/Extended address register support
      configs: zynq: Enable zynq qspi controller
      spi: Kconfig: Add Zynq QSPI controller entry
      spi: zynq_spi: Add config reg shift named macros
      spi: zynq_spi: Rename baudrate divisor mask name
      spi: zynq_spi: Store cs value into private data
      sf: params: Add IS25LP032 part support
      sf: params: Add IS25LP064 part support
      sf: params: Add IS25LP128 part support
      zynq-common: Enable ISSI SPI-NOR flash support
      spi: xilinx_spi: Fix to configure CPOL, CPHA mask
      spi: zynq_spi: Fix to configure CPOL, CPHA mask
      spi: zynq_qspi: Fix to configure CPOL, CPHA mask

Mirza Krak (1):
      spi: tegra20: Add support for mode selection

Siva Durga Prasad Paladugu (1):
      zynq-common: Add SPL SPI offset, size configs

 arch/arm/dts/zynq-7000.dtsi                    |  12 +
 arch/arm/dts/zynq-microzed.dts                 |   5 +
 arch/arm/dts/zynq-zc702.dts                    |   5 +
 arch/arm/dts/zynq-zc706.dts                    |   5 +
 arch/arm/dts/zynq-zc770-xm010.dts              |   7 +-
 arch/arm/dts/zynq-zed.dts                      |   5 +
 configs/zynq_microzed_defconfig                |   2 +
 configs/zynq_zc702_defconfig                   |   2 +
 configs/zynq_zc706_defconfig                   |   2 +
 configs/zynq_zc70x_defconfig                   |   2 +
 configs/zynq_zc770_xm010_defconfig             |   1 +
 configs/zynq_zed_defconfig                     |   2 +
 doc/device-tree-bindings/spi/spi-zynq-qspi.txt |  26 ++
 drivers/mtd/spi/sf_params.c                    |   5 +
 drivers/spi/Kconfig                            |   9 +
 drivers/spi/Makefile                           |   1 +
 drivers/spi/tegra20_slink.c                    |  21 +
 drivers/spi/xilinx_spi.c                       |  10 +-
 drivers/spi/zynq_qspi.c                        | 623 +++++++++++++++++++++++++
 drivers/spi/zynq_spi.c                         |  27 +-
 include/configs/zynq-common.h                  |  15 +
 21 files changed, 771 insertions(+), 16 deletions(-)
 create mode 100644 doc/device-tree-bindings/spi/spi-zynq-qspi.txt
 create mode 100644 drivers/spi/zynq_qspi.c