[U-Boot] [PATCH 01/14] net/fm: Fix the endian issue of ucode uploading to IRAM
Gong Qianyu
Qianyu.Gong at freescale.com
Fri Sep 11 13:02:18 CEST 2015
From: Shaohui Xie <Shaohui.Xie at freescale.com>
Remove the redundant byte swap of the ucode before uploading to IRAM.
Signed-off-by: Hou Zhiqiang <B48286 at freescale.com>
Signed-off-by: Shaohui Xie <Shaohui.Xie at freescale.com>
Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
Signed-off-by: Gong Qianyu <Qianyu.Gong at freescale.com>
---
drivers/net/fm/eth.c | 69 +++++++++++++++++++++++++++-------------------------
drivers/net/fm/fm.c | 11 +++++----
2 files changed, 42 insertions(+), 38 deletions(-)
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 6702f5a..cd05dbc 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -109,7 +109,7 @@ static int tgec_is_fibre(struct eth_device *dev)
static u16 muram_readw(u16 *addr)
{
u32 base = (u32)addr & ~0x3;
- u32 val32 = *(u32 *)base;
+ u32 val32 = in_be32((u32 *)base);
int byte_pos;
u16 ret;
@@ -125,7 +125,7 @@ static u16 muram_readw(u16 *addr)
static void muram_writew(u16 *addr, u16 val)
{
u32 base = (u32)addr & ~0x3;
- u32 org32 = *(u32 *)base;
+ u32 org32 = in_be32((u32 *)base);
u32 val32;
int byte_pos;
@@ -135,7 +135,7 @@ static void muram_writew(u16 *addr, u16 val)
else
val32 = (org32 & 0x0000ffff) | ((u32)val << 16);
- *(u32 *)base = val32;
+ out_be32((u32 *)base, val32);
}
static void bmi_rx_port_disable(struct fm_bmi_rx_port *rx_port)
@@ -213,10 +213,10 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
/* enable global mode- snooping data buffers and BDs */
- pram->mode = PRAM_MODE_GLOBAL;
+ out_be32(&pram->mode, PRAM_MODE_GLOBAL);
/* init the Rx queue descriptor pionter */
- pram->rxqd_ptr = pram_page_offset + 0x20;
+ out_be32(&pram->rxqd_ptr, pram_page_offset + 0x20);
/* set the max receive buffer length, power of 2 */
muram_writew(&pram->mrblr, MAX_RXBUF_LOG2);
@@ -243,10 +243,10 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
/* init Rx BDs ring */
rxbd = (struct fm_port_bd *)rx_bd_ring_base;
for (i = 0; i < RX_BD_RING_SIZE; i++) {
- rxbd->status = RxBD_EMPTY;
- rxbd->len = 0;
- rxbd->buf_ptr_hi = 0;
- rxbd->buf_ptr_lo = (u32)rx_buf_pool + i * MAX_RXBUF_LEN;
+ muram_writew(&rxbd->status, RxBD_EMPTY);
+ muram_writew(&rxbd->len, 0);
+ muram_writew(&rxbd->buf_ptr_hi, 0);
+ out_be32(&rxbd->buf_ptr_lo, (u32)rx_buf_pool + i * MAX_RXBUF_LEN);
rxbd++;
}
@@ -254,7 +254,7 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
rxqd = &pram->rxqd;
muram_writew(&rxqd->gen, 0);
muram_writew(&rxqd->bd_ring_base_hi, 0);
- rxqd->bd_ring_base_lo = (u32)rx_bd_ring_base;
+ out_be32(&rxqd->bd_ring_base_lo, (u32)rx_bd_ring_base);
muram_writew(&rxqd->bd_ring_size, sizeof(struct fm_port_bd)
* RX_BD_RING_SIZE);
muram_writew(&rxqd->offset_in, 0);
@@ -285,10 +285,10 @@ static int fm_eth_tx_port_parameter_init(struct fm_eth *fm_eth)
pram_page_offset = (u32)pram - fm_muram_base(fm_eth->fm_index);
/* enable global mode- snooping data buffers and BDs */
- pram->mode = PRAM_MODE_GLOBAL;
+ out_be32(&pram->mode, PRAM_MODE_GLOBAL);
/* init the Tx queue descriptor pionter */
- pram->txqd_ptr = pram_page_offset + 0x40;
+ out_be32(&pram->txqd_ptr, pram_page_offset + 0x40);
/* alloc Tx buffer descriptors from main memory */
tx_bd_ring_base = malloc(sizeof(struct fm_port_bd)
@@ -304,16 +304,17 @@ static int fm_eth_tx_port_parameter_init(struct fm_eth *fm_eth)
/* init Tx BDs ring */
txbd = (struct fm_port_bd *)tx_bd_ring_base;
for (i = 0; i < TX_BD_RING_SIZE; i++) {
- txbd->status = TxBD_LAST;
- txbd->len = 0;
- txbd->buf_ptr_hi = 0;
- txbd->buf_ptr_lo = 0;
+ muram_writew(&txbd->status, TxBD_LAST);
+ muram_writew(&txbd->len, 0);
+ muram_writew(&txbd->buf_ptr_hi, 0);
+ out_be32(&txbd->buf_ptr_lo, 0);
+ txbd++;
}
/* set the Tx queue decriptor */
txqd = &pram->txqd;
muram_writew(&txqd->bd_ring_base_hi, 0);
- txqd->bd_ring_base_lo = (u32)tx_bd_ring_base;
+ out_be32(&txqd->bd_ring_base_lo, (u32)tx_bd_ring_base);
muram_writew(&txqd->bd_ring_size, sizeof(struct fm_port_bd)
* TX_BD_RING_SIZE);
muram_writew(&txqd->offset_in, 0);
@@ -368,7 +369,7 @@ static void fmc_tx_port_graceful_stop_enable(struct fm_eth *fm_eth)
pram = fm_eth->tx_pram;
/* graceful stop transmission of frames */
- pram->mode |= PRAM_MODE_GRACEFUL_STOP;
+ setbits_be32(&pram->mode, PRAM_MODE_GRACEFUL_STOP);
sync();
}
@@ -378,7 +379,7 @@ static void fmc_tx_port_graceful_stop_disable(struct fm_eth *fm_eth)
pram = fm_eth->tx_pram;
/* re-enable transmission of frames */
- pram->mode &= ~PRAM_MODE_GRACEFUL_STOP;
+ clrbits_be32(&pram->mode, PRAM_MODE_GRACEFUL_STOP);
sync();
}
@@ -469,19 +470,20 @@ static int fm_eth_send(struct eth_device *dev, void *buf, int len)
txbd = fm_eth->cur_txbd;
/* find one empty TxBD */
- for (i = 0; txbd->status & TxBD_READY; i++) {
+ for (i = 0; muram_readw(&txbd->status) & TxBD_READY; i++) {
udelay(100);
if (i > 0x1000) {
- printf("%s: Tx buffer not ready\n", dev->name);
+ printf("%s: Tx buffer not ready, txbd->status = 0x%x\n",
+ dev->name, muram_readw(&txbd->status));
return 0;
}
}
/* setup TxBD */
- txbd->buf_ptr_hi = 0;
- txbd->buf_ptr_lo = (u32)buf;
- txbd->len = len;
+ muram_writew(&txbd->buf_ptr_hi, 0);
+ out_be32(&txbd->buf_ptr_lo, (u32)buf);
+ muram_writew(&txbd->len, len);
sync();
- txbd->status = TxBD_READY | TxBD_LAST;
+ muram_writew(&txbd->status, TxBD_READY | TxBD_LAST);
sync();
/* update TxQD, let RISC to send the packet */
@@ -493,10 +495,11 @@ static int fm_eth_send(struct eth_device *dev, void *buf, int len)
sync();
/* wait for buffer to be transmitted */
- for (i = 0; txbd->status & TxBD_READY; i++) {
+ for (i = 0; muram_readw(&txbd->status) & TxBD_READY; i++) {
udelay(100);
if (i > 0x10000) {
- printf("%s: Tx error\n", dev->name);
+ printf("%s: Tx error, txbd->status = 0x%x\n",
+ dev->name, muram_readw(&txbd->status));
return 0;
}
}
@@ -525,12 +528,12 @@ static int fm_eth_recv(struct eth_device *dev)
fm_eth = (struct fm_eth *)dev->priv;
pram = fm_eth->rx_pram;
rxbd = fm_eth->cur_rxbd;
- status = rxbd->status;
+ status = muram_readw(&rxbd->status);
while (!(status & RxBD_EMPTY)) {
if (!(status & RxBD_ERROR)) {
- data = (u8 *)rxbd->buf_ptr_lo;
- len = rxbd->len;
+ data = (u8 *)in_be32(&rxbd->buf_ptr_lo);
+ len = muram_readw(&rxbd->len);
net_process_received_packet(data, len);
} else {
printf("%s: Rx error\n", dev->name);
@@ -538,8 +541,8 @@ static int fm_eth_recv(struct eth_device *dev)
}
/* clear the RxBDs */
- rxbd->status = RxBD_EMPTY;
- rxbd->len = 0;
+ muram_writew(&rxbd->status, RxBD_EMPTY);
+ muram_writew(&rxbd->len, 0);
sync();
/* advance RxBD */
@@ -548,7 +551,7 @@ static int fm_eth_recv(struct eth_device *dev)
if (rxbd >= (rxbd_base + RX_BD_RING_SIZE))
rxbd = rxbd_base;
/* read next status */
- status = rxbd->status;
+ status = muram_readw(&rxbd->status);
/* update RxQD */
offset_out = muram_readw(&pram->rxqd.offset_out);
diff --git a/drivers/net/fm/fm.c b/drivers/net/fm/fm.c
index 400e9dd..eb0eb3d 100644
--- a/drivers/net/fm/fm.c
+++ b/drivers/net/fm/fm.c
@@ -80,11 +80,11 @@ static void fm_upload_ucode(int fm_idx, struct fm_imem *imem,
out_be32(&imem->iadd, IRAM_IADD_AIE);
/* write microcode to IRAM */
for (i = 0; i < size / 4; i++)
- out_be32(&imem->idata, ucode[i]);
+ out_be32(&imem->idata, (be32_to_cpu(ucode[i])));
/* verify if the writing is over */
out_be32(&imem->iadd, 0);
- while ((in_be32(&imem->idata) != ucode[0]) && --timeout)
+ while ((in_be32(&imem->idata) != be32_to_cpu(ucode[0])) && --timeout)
;
if (!timeout)
printf("Fman%u: microcode upload timeout\n", fm_idx + 1);
@@ -177,14 +177,15 @@ static int fman_upload_firmware(int fm_idx,
const struct qe_microcode *ucode = &firmware->microcode[i];
/* Upload a microcode if it's present */
- if (ucode->code_offset) {
+ if (be32_to_cpu(ucode->code_offset)) {
u32 ucode_size;
u32 *code;
printf("Fman%u: Uploading microcode version %u.%u.%u\n",
fm_idx + 1, ucode->major, ucode->minor,
ucode->revision);
- code = (void *)firmware + ucode->code_offset;
- ucode_size = sizeof(u32) * ucode->count;
+ code = (void *)firmware +
+ be32_to_cpu(ucode->code_offset);
+ ucode_size = sizeof(u32) * be32_to_cpu(ucode->count);
fm_upload_ucode(fm_idx, fm_imem, code, ucode_size);
}
}
--
2.1.0.27.g96db324
More information about the U-Boot
mailing list