[U-Boot] [PATCH 07/19] ARM: k2g: Add support for pin mux configuration
Lokesh Vutla
lokeshvutla at ti.com
Sat Sep 19 12:56:44 CEST 2015
From: Vitaly Andrianov <vitalya at ti.com>
Add api for configuring pin mux.
Signed-off-by: Vitaly Andrianov <vitalya at ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
arch/arm/mach-keystone/include/mach/mux-k2g.h | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 arch/arm/mach-keystone/include/mach/mux-k2g.h
diff --git a/arch/arm/mach-keystone/include/mach/mux-k2g.h b/arch/arm/mach-keystone/include/mach/mux-k2g.h
new file mode 100644
index 0000000..6167d2c
--- /dev/null
+++ b/arch/arm/mach-keystone/include/mach/mux-k2g.h
@@ -0,0 +1,58 @@
+/*
+ * K2G: Pinmux configuration
+ *
+ * (C) Copyright 2015
+ * Texas Instruments Incorporated, <www.ti.com>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __ASM_ARCH_MUX_K2G_H
+#define __ASM_ARCH_MUX_K2G_H
+
+#include <common.h>
+#include <asm/io.h>
+
+#define K2G_PADCFG_REG (KS2_DEVICE_STATE_CTRL_BASE + 0x1000)
+
+/*
+ * 20:19 - buffer class RW fixed
+ * 18 - rxactive (Input enabled for the pad ) 0 - Di; 1 - En;
+ * 17 - pulltypesel (0 - PULLDOWN; 1 - PULLUP);
+ * 16 - pulluden (0 - PULLUP/DOWN EN; 1 - DI);
+ * 3:0 - muxmode (available modes 0:5)
+ */
+
+#define PIN_IEN (1 << 18) /* pin input enabled */
+#define PIN_PDIS (1 << 16) /* pull up/down disabled */
+#define PIN_PTU (1 << 17) /* pull up */
+#define PIN_PTD (0 << 17) /* pull down */
+
+#define MODE(m) ((m) & 0x7)
+#define MAX_PIN_N 260
+
+#define MUX_CFG(value, index) \
+ __raw_writel(\
+ (value) | \
+ (__raw_readl(K2G_PADCFG_REG + (index << 2)) & \
+ (0x3 << 19)),\
+ (K2G_PADCFG_REG + (index << 2))\
+ );
+
+struct pin_cfg {
+ int reg_inx;
+ u32 val;
+};
+
+static inline void configure_pin_mux(struct pin_cfg *pin_mux)
+{
+ if (!pin_mux)
+ return;
+
+ while ((pin_mux->reg_inx >= 0) && (pin_mux->reg_inx < MAX_PIN_N)) {
+ MUX_CFG(pin_mux->val, pin_mux->reg_inx);
+ pin_mux++;
+ }
+}
+
+#endif /* __ASM_ARCH_MUX_K2G_H */
--
2.1.4
More information about the U-Boot
mailing list