[U-Boot] [PATCH 0/3] Fix fdt 'reg' parsing and unbreak Odroid U3

[Przemyslaw Marczak]

Booting of Odroid U3 with SD card, ends with error:

MMC:   EXYNOS DWMMC: 0
Card did not respond to voltage select!
*** Warning - MMC init failed, using default environment

Generally this was broken, because of wrong addresses assigned to GPIOs.

The source of the problem was in rework of lib/fdtdec.c, after which
function fdtdec_get_addr() doesn't work as previous and function
dev_get_addr() doesn't works as expected.

The code after rework in lib/fdtdec.c assume, that #size-cells property,
should be always greater or equal to 1. This was wrong, because it can be 0.

In case of debugging the issue I found, that mmc clock was computed wrong,
for Exynos4, because of function get_mmc_clk(), which always return -1 for
this SoC.

Tested on: Odroid U3 and Odroid XU3.

Przemyslaw Marczak (3):
  fix: fdtdec: allow parse 'reg' property with zero value in
    '#size-cells'
  fix: s5p_gpio: call: dev_get_addr() instead of fdtdec_get_addr()
  fix: mach-exynos: clock: restore calling dead exynos4_get_mmc_clk()

 arch/arm/mach-exynos/clock.c | 10 ++++------
 drivers/gpio/s5p_gpio.c      | 18 +++++++++++-------
 lib/fdtdec.c                 |  2 +-
 3 files changed, 16 insertions(+), 14 deletions(-)

-- 
1.9.1