[U-Boot] [U-Boot,V2,3/5] rpi: add Raspberry Pi 3 board ID

Tom Rini trini at konsulko.com
Sat Apr 2 03:57:29 CEST 2016


On Thu, Mar 24, 2016 at 10:15:18PM -0600, Stephen Warren wrote:

> This allows U-Boot to known the name of the board.
> 
> The existing rpi_2_defconfig can operate correctly on the Raspberry Pi 3
> in 32-bit mode /if/ you have configured the firmware to use the PL011 UART
> as the console UART (the default is the mini UART). This requires two
> things:
> a) config.txt should contain dtoverlay=pi3-miniuart-bt
> b) You should run the following to tell the VC FW to process DT when
> booting, and copy u-boot.bin.img (rather than u-boot.bin) to the SD card
> as the kernel image:
> 
>    path/to/kernel/scripts/mkknlimg --dtok u-boot.bin u-boot.bin.img
> 
> This works as of firmware.git commit 046effa13ebc "firmware: arm_loader:
> emmc clock depends on core clock See:
> https://github.com/raspberrypi/firmware/issues/572".
> 
> Signed-off-by: Stephen Warren <swarren at wwwdotorg.org>
> Reviewed-by: Tom Rini <trini at konsulko.com>

Applied to u-boot/master, thanks!

-- 
Tom
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 836 bytes
Desc: Digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160401/3259c6e7/attachment.sig>


More information about the U-Boot mailing list