April 2016 Archives by author
Starting: Fri Apr 1 02:59:22 CEST 2016
Ending: Sat Apr 30 18:18:57 CEST 2016
Messages: 3012
- [U-Boot] [PATCH] Revert "arm: Remove wireless_space board"
Albert ARIBAUD
- [U-Boot] [PATCH 0/2] pinctrl: add support for exynos7420 pinctrl driver
Thomas Abraham
- [U-Boot] [PATCH 1/2] pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devices
Thomas Abraham
- [U-Boot] [PATCH 2/2] pinctrl: Add pinctrl driver support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH 0/9] Add support for Espresso7420 board
Thomas Abraham
- [U-Boot] [PATCH 1/9] pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devices
Thomas Abraham
- [U-Boot] [PATCH 2/9] pinctrl: Add pinctrl driver support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH 3/9] clk: fixed_rate: allow driver usage prior to relocation
Thomas Abraham
- [U-Boot] [PATCH 4/9] clk: exynos: add clock driver for Exynos7420 Soc
Thomas Abraham
- [U-Boot] [PATCH 5/9] serial: s5p: get the port id number from the alias of the device node
Thomas Abraham
- [U-Boot] [PATCH 6/9] serial: s5p: use clock api to get clock rate
Thomas Abraham
- [U-Boot] [PATCH 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Thomas Abraham
- [U-Boot] [PATCH 8/9] arm: exynos: add support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH 9/9] board: samsung: add initial Espresso7420 board support
Thomas Abraham
- [U-Boot] [PATCH 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Thomas Abraham
- [U-Boot] [PATCH v2 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Thomas Abraham
- [U-Boot] [PATCH v2 8/9] arm: exynos: add support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH 4/9] clk: exynos: add clock driver for Exynos7420 Soc
Thomas Abraham
- [U-Boot] [PATCH 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Thomas Abraham
- [U-Boot] [PATCH 8/9] arm: exynos: add support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH 9/9] board: samsung: add initial Espresso7420 board support
Thomas Abraham
- [U-Boot] [PATCH 0/9] Add support for Espresso7420 board
Thomas Abraham
- [U-Boot] [PATCH v3 0/8] Add support for Espresso7420 board
Thomas Abraham
- [U-Boot] [PATCH v3 1/8] pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devices
Thomas Abraham
- [U-Boot] [PATCH v3 2/8] pinctrl: Add pinctrl driver support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH v3 3/8] clk: exynos: add clock driver for Exynos7420 Soc
Thomas Abraham
- [U-Boot] [PATCH v3 4/8] serial: s5p: get the port id number from the alias of the device node
Thomas Abraham
- [U-Boot] [PATCH v3 5/8] serial: s5p: use clock api to get clock rate
Thomas Abraham
- [U-Boot] [PATCH v3 6/8] arm: exynos: realign the code to allow support for newer 64-bit platforms
Thomas Abraham
- [U-Boot] [PATCH v3 7/8] arm: exynos: add support for Exynos7420 SoC
Thomas Abraham
- [U-Boot] [PATCH v3 8/8] board: samsung: add initial Espresso7420 board support
Thomas Abraham
- [U-Boot] [PATCH 0/2] cmd: fdt: Add device tree overlays support
Stefan Agner
- [U-Boot] [PATCH 1/2] net: fix vlan validation
Stefan Agner
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Stefan Agner
- [U-Boot] [PATCH 1/2] net: fix vlan validation
Stefan Agner
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Stefan Agner
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Stefan Agner
- [U-Boot] [PATCH 0/9] Add support for Espresso7420 board
Alim Akhtar
- [U-Boot] [PATCH v3 0/8] Add support for Espresso7420 board
Alim Akhtar
- [U-Boot] [PATCH] am57x: Move CONS_INDEX to Kconfig
Daniel Allred
- [U-Boot] [PATCH 00/16] Support for boot image creation for TI secure devices
Daniel Allred
- [U-Boot] [PATCH 01/16] doc: Add info on using secure devices from TI
Daniel Allred
- [U-Boot] [PATCH 02/16] arm: am33xx: Kconfig: Add secure device definitions
Daniel Allred
- [U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Daniel Allred
- [U-Boot] [PATCH 04/16] ti: omap-common: Add Kconfig file for secure device support
Daniel Allred
- [U-Boot] [PATCH 05/16] ti: omap-common: Add commands for generating secure SPL images
Daniel Allred
- [U-Boot] [PATCH 06/16] ti: AM43xx: config.mk: Add support for generating secure boot images
Daniel Allred
- [U-Boot] [PATCH 07/16] ti: AM43xx: Use CONFIG options from SOC Kconfig
Daniel Allred
- [U-Boot] [PATCH 08/16] ti: AM43xx: board: Detect AM43xx HS EVM
Daniel Allred
- [U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts
Daniel Allred
- [U-Boot] [PATCH 10/16] ti_omap5_common: Update SPL start address on secure parts
Daniel Allred
- [U-Boot] [PATCH 11/16] spl: build: ti: add support for secure boot images
Daniel Allred
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Daniel Allred
- [U-Boot] [PATCH 13/16] ARM: omap5: add hooks for cpu/SoC fdt fixups
Daniel Allred
- [U-Boot] [PATCH 14/16] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Daniel Allred
- [U-Boot] [PATCH 15/16] ARM: omap5: Add config for board/cpu fdt fixups
Daniel Allred
- [U-Boot] [PATCH 16/16] defconfig: ti: Add configs for OMAP5-class secure parts
Daniel Allred
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Allred, Daniel
- [U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts
Allred, Daniel
- [U-Boot] [PATCH v2 00/15] Support for boot image creation for TI secure devices
Daniel Allred
- [U-Boot] [PATCH v2 01/15] doc: Add info on using secure devices from TI
Daniel Allred
- [U-Boot] [PATCH v2 02/15] arm: am33xx: Kconfig: Add secure device definitions
Daniel Allred
- [U-Boot] [PATCH v2 03/15] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Daniel Allred
- [U-Boot] [PATCH v2 04/15] ti: omap-common: Add Kconfig file for secure device support
Daniel Allred
- [U-Boot] [PATCH v2 05/15] ti: omap-common: Add commands for generating secure SPL images
Daniel Allred
- [U-Boot] [PATCH v2 06/15] ti: AM43xx: config.mk: Add support for generating secure boot images
Daniel Allred
- [U-Boot] [PATCH v2 07/15] ti: AM43xx: Use CONFIG options from SOC Kconfig
Daniel Allred
- [U-Boot] [PATCH v2 08/15] ti: AM43xx: board: Detect AM43xx HS EVM
Daniel Allred
- [U-Boot] [PATCH v2 09/15] defconfig: Add a config for AM43xx secure part
Daniel Allred
- [U-Boot] [PATCH v2 10/15] ti_omap5_common: Update SPL start address on secure parts
Daniel Allred
- [U-Boot] [PATCH v2 11/15] spl: build: ti: add support for secure boot images
Daniel Allred
- [U-Boot] [PATCH v2 12/15] ARM: omap-common: Add device type to CPU string
Daniel Allred
- [U-Boot] [PATCH v2 13/15] ARM: omap5: add hooks for cpu/SoC fdt fixups
Daniel Allred
- [U-Boot] [PATCH v2 14/15] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Daniel Allred
- [U-Boot] [PATCH v2 15/15] defconfig: ti: Add configs for OMAP5-class secure parts
Daniel Allred
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Pantelis Antoniou
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Pantelis Antoniou
- [U-Boot] Fresh New Soc+Board port with Driver Model
Neil Armstrong
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
B, Ravi
- [U-Boot] [PATCH] mx6sabresd: Remove unneeded enable_lvds() function
Stefano Babic
- [U-Boot] [PATCH 1/2] warp7: Pass the UART base definition
Stefano Babic
- [U-Boot] [PATCH 2/2] mx7_common: Define CONFIG_SYS_MALLOC_LEN in the board file
Stefano Babic
- [U-Boot] [PATCH 1/2] mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Stefano Babic
- [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value
Stefano Babic
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Stefano Babic
- [U-Boot] [PATCH 1/5] tools/env: make env_aes_cbc_crypt re-entrant
Stefano Babic
- [U-Boot] [PATCH] imx: mx6var_som: Add support for Variscite mx6 boards
Stefano Babic
- [U-Boot] [PATCH 0/5] tools/env: pass arguments as parameters not global structure
Stefano Babic
- [U-Boot] [PATCH] board: ge: bx50v3: Use pwm for display backlight
Stefano Babic
- [U-Boot] [PATCH] board: ge: bx50v3: Update display setup
Stefano Babic
- [U-Boot] [PATCH] imx: mx6var_som: Add support for Variscite mx6 boards
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH] board: ge: bx50v3: Disable unused pins
Stefano Babic
- [U-Boot] [PATCH] arm: mx5: Fix NAND image generation
Stefano Babic
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Stefano Babic
- [U-Boot] [PULL] Please pull u-boot-imx
Stefano Babic
- [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT
Stefano Babic
- [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT
Stefano Babic
- [U-Boot] imx6 devices failing to build with 2016.05
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Stefano Babic
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Stefano Babic
- [U-Boot] [PATCH] video: ipu_common: fix build error
Stefano Babic
- [U-Boot] Problem with sf write on Arria 5.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with sf write on Arria 5.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] Problem with sf write on Arria 5.
Bakhvalov, Denis (Nokia - PL/Wroclaw)
- [U-Boot] [PATCH] zynq: Allow board specific files to over write CONFIG_EXTRA_ENV_SETTINGS.
Philip Balister
- [U-Boot] [PATCH] armv8: ls2080: enable sec_init in U-Boot
Aneesh Bansal
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
Aneesh Bansal
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
Aneesh Bansal
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
Aneesh Bansal
- [U-Boot] [PATCH] bugfix: unlock current sector instead of sector 0 before, buffered write
Rouven Behr
- [U-Boot] [PATCH] board: ge: bx50v3: Use pwm for display backlight
Akshay Bhat
- [U-Boot] [PATCH] board: ge: bx50v3: Update display setup
Akshay Bhat
- [U-Boot] [PATCH v2 0/5] imx: bx50v3 display setup updates
Akshay Bhat
- [U-Boot] [PATCH v2 1/5] imx: mx6: Fix procedure to switch the parent of LDB_DI_CLK
Akshay Bhat
- [U-Boot] [PATCH v2 2/5] board: ge: bx50v3: Split display setup function
Akshay Bhat
- [U-Boot] [PATCH v2 3/5] board: ge: bx50v3: Setup LDB_DI_CLK source
Akshay Bhat
- [U-Boot] [PATCH v2 4/5] board: ge: bx50v3: Use pwm for display backlight
Akshay Bhat
- [U-Boot] [PATCH v2 5/5] board: ge: bx50v3: Fix to meet LVDS display power on timing
Akshay Bhat
- [U-Boot] [PATCH] board: ge: bx50v3: Disable unused pins
Akshay Bhat
- [U-Boot] [PATCH] bx50v3: Enable CONFIG_OF_LIBFDT in defconfig
Akshay Bhat
- [U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver
Andreas Bießmann
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Andreas Bießmann
- [U-Boot] [PATCH v2 16/27] mkimage: Allow a FIT to include an image of any type
Andreas Bießmann
- [U-Boot] [PATCH] ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
Sebastien Bourdelin
- [U-Boot] [PATCH] ts4800: add CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
Sebastien Bourdelin
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Boris Brezillon
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Boris Brezillon
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Boris Brezillon
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Boris Brezillon
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Boris Brezillon
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Boris Brezillon
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Alexey Brodkin
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Alexey Brodkin
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Alexey Brodkin
- [U-Boot] [PATCH] arc: get rid of running_on_hw
Alexey Brodkin
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Alexey Brodkin
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Alexey Brodkin
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Alexey Brodkin
- [U-Boot] [PATCH] arc/cache: really do flush_dcache_all() even if IOC exists
Alexey Brodkin
- [U-Boot] Please pull ARC changes
Alexey Brodkin
- [U-Boot] [PATCH] arc/cache: really do flush_dcache_all() even if IOC exists
Alexey Brodkin
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] [PATCH 01/10] ddr: altera: Replace ad-hoc constant with macro
George Broz
- [U-Boot] [PATCH 02/10] ddr: altera: Tweak DQS tracking enable handling
George Broz
- [U-Boot] [PATCH 03/10] ddr: altera: Fix scc_mgr_set() argument order
George Broz
- [U-Boot] [PATCH 04/10] ddr: altera: Fix DRAM end value in protection rule
George Broz
- [U-Boot] [PATCH 05/10] ddr: altera: Remove unnecessary update of the SCC
George Broz
- [U-Boot] [PATCH 06/10] ddr: altera: Remove unnecessary ODT mode config
George Broz
- [U-Boot] [PATCH 07/10] ddr: altera: Zero DM IN delay in scc_mgr_zero_group()
George Broz
- [U-Boot] [PATCH 08/10] ddr: altera: Make DLEVEL behavior inclusive
George Broz
- [U-Boot] [PATCH 09/10] ddr: altera: Staticize global variables
George Broz
- [U-Boot] [PATCH 10/10] ddr: altera: Repair DQ window centering code
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] Newbie SPL question for socfpga_sockit
George Broz
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Carlo Caione
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Ian Campbell
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Ian Campbell
- [U-Boot] [PATCH 1/3] musb: sunxi: Do not allocate musb struct multiple times
Ian Campbell
- [U-Boot] [PATCH 1/3] sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option
Ian Campbell
- [U-Boot] [PATCH 2/3] sunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3
Ian Campbell
- [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3
Ian Campbell
- [U-Boot] [PATCH] sunxi: Enable CMD_GPIO on all sunxi boards
Ian Campbell
- [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3
Ian Campbell
- [U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove
Ian Campbell
- [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
Ian Campbell
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Ian Campbell
- [U-Boot] [PATCH] sunxi: Enable LDO3 at 3.3V on A13-OLinuXino board
Ian Campbell
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Ian Campbell
- [U-Boot] [PATCH] Revert "rockchip: rk3288: correct sdram setting"
Vagrant Cascadian
- [U-Boot] [ANN] v2016.05-rc3
Vagrant Cascadian
- [U-Boot] Missing flush_cache in do_load function
James Chargin
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
James Chargin
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Hong Chen
- [U-Boot] [PATCH v2] spi: Support 4 byte address only SPI flash
Tim Chick
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Tim Chick
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Tim Chick
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Tim Chick
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Tim Chick
- [U-Boot] Problem of git clone with http
Jaehoon Chung
- [U-Boot] Problem of git clone with http
Jaehoon Chung
- [U-Boot] [U-BOOT] [RFC PATCH] EMAC driver for H3/A64
LABBE Corentin
- [U-Boot] [PATCH] ARM: tegra: enable GPU node by compatible value
Alexandre Courbot
- [U-Boot] [PATCH] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH v3] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Yunhui Cui
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Bhuvanchandra DV
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Bhuvanchandra DV
- [U-Boot] [PATCH v2] arm: dts: vf6: fix DTC unit warnings
Bhuvanchandra DV
- [U-Boot] [RFC] SPL -> U-Boot Chain of Trust
Andreas Dannenberg
- [U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Andreas Dannenberg
- [U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Andreas Dannenberg
- [U-Boot] [PATCH 07/16] ti: AM43xx: Use CONFIG options from SOC Kconfig
Andreas Dannenberg
- [U-Boot] [PATCH 06/16] ti: AM43xx: config.mk: Add support for generating secure boot images
Andreas Dannenberg
- [U-Boot] [PATCH 02/16] arm: am33xx: Kconfig: Add secure device definitions
Andreas Dannenberg
- [U-Boot] [PATCH 01/16] doc: Add info on using secure devices from TI
Andreas Dannenberg
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] [PATCH 05/16] ti: omap-common: Add commands for generating secure SPL images
Andreas Dannenberg
- [U-Boot] [PATCH 04/16] ti: omap-common: Add Kconfig file for secure device support
Andreas Dannenberg
- [U-Boot] [PATCH 10/16] ti_omap5_common: Update SPL start address on secure parts
Andreas Dannenberg
- [U-Boot] [PATCH 13/16] ARM: omap5: add hooks for cpu/SoC fdt fixups
Andreas Dannenberg
- [U-Boot] [PATCH 14/16] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Andreas Dannenberg
- [U-Boot] [PATCH 15/16] ARM: omap5: Add config for board/cpu fdt fixups
Andreas Dannenberg
- [U-Boot] [PATCH 16/16] defconfig: ti: Add configs for OMAP5-class secure parts
Andreas Dannenberg
- [U-Boot] [PATCH 11/16] spl: build: ti: add support for secure boot images
Andreas Dannenberg
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] Problem of git clone with http
Andreas Dannenberg
- [U-Boot] [RFC] SPL -> U-Boot Chain of Trust
Andreas Dannenberg
- [U-Boot] Problem of git clone with http
Andreas Dannenberg
- [U-Boot] Problem of git clone with http
Andreas Dannenberg
- [U-Boot] [PATCH v2 09/15] defconfig: Add a config for AM43xx secure part
Andreas Dannenberg
- [U-Boot] [PATCH v2 10/15] ti_omap5_common: Update SPL start address on secure parts
Andreas Dannenberg
- [U-Boot] [PATCH v2 12/15] ARM: omap-common: Add device type to CPU string
Andreas Dannenberg
- [U-Boot] [PATCH v2 13/15] ARM: omap5: add hooks for cpu/SoC fdt fixups
Andreas Dannenberg
- [U-Boot] [PATCH v2 14/15] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Andreas Dannenberg
- [U-Boot] [PATCH v2 15/15] defconfig: ti: Add configs for OMAP5-class secure parts
Andreas Dannenberg
- [U-Boot] [PATCH v2 03/15] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Andreas Dannenberg
- [U-Boot] [PATCH v6 0/4] Make usb device-tree fixup independent of USB controller
Sriram Dash
- [U-Boot] [PATCH v6 1/4] drivers:usb:common:fsl-dt-fixup: Move device-tree fixup framework to common file
Sriram Dash
- [U-Boot] [PATCH v6 2/4] drivers:usb:common:fsl-dt-fixup: Remove code duplication for fdt_usb_get_node_type
Sriram Dash
- [U-Boot] [PATCH v6 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller
Sriram Dash
- [U-Boot] [PATCH v6 4/4] drivers:usb:common:fsl-dt-fixup: fix return value of fdt_usb_get_node_type
Sriram Dash
- [U-Boot] is there an official MAINTAINER for u-boot POST support?
Robert P. J. Day
- [U-Boot] want to clarify a couple things about vendor common/ directories
Robert P. J. Day
- [U-Boot] is there any value to board/dave/ directory?
Robert P. J. Day
- [U-Boot] worth cleaning redundancies out of some board Makefiles?
Robert P. J. Day
- [U-Boot] [PATCH] Remove references to CONFIG_CMD_EXT3, no such command
Robert P. J. Day
- [U-Boot] worth cleaning redundancies out of some board Makefiles?
Robert P. J. Day
- [U-Boot] [PATCH] freescale: Tweak various Makefiles to remove redundancy, fix aesthetics
Robert P. J. Day
- [U-Boot] worth cleaning redundancies out of some board Makefiles?
Robert P. J. Day
- [U-Boot] [PATCH] doc: Updated README.ext4
Robert P. J. Day
- [U-Boot] is there an official MAINTAINER for u-boot POST support?
Robert P. J. Day
- [U-Boot] [PATCH] board: Remove overlooked vestiges of "dave" board.
Robert P. J. Day
- [U-Boot] want to clarify a couple things about vendor common/ directories
Robert P. J. Day
- [U-Boot] what is the rationale for 900+ lines duplicated in common/dlmalloc.c and include/malloc.h?
Robert P. J. Day
- [U-Boot] SYS_MALLOC_SIMPLE versus SPL_SYS_MALLOC_SIMPLE?
Robert P. J. Day
- [U-Boot] couple questions about tail end of common/Makefile
Robert P. J. Day
- [U-Boot] [PATCH] Kconfig: Simple aesthetic/grammar fixes to top-level Kconfig
Robert P. J. Day
- [U-Boot] uh ... is it "help" or "---help---"?
Robert P. J. Day
- [U-Boot] what's the minimal amount needed to define two *very* closely-related boards?
Robert P. J. Day
- [U-Boot] uh ... is it "help" or "---help---"?
Robert P. J. Day
- [U-Boot] what is the rationale for 900+ lines duplicated in common/dlmalloc.c and include/malloc.h?
Robert P. J. Day
- [U-Boot] [PATCH] common/dlmalloc.c: Delete content that was moved to malloc.h
Robert P. J. Day
- [U-Boot] precedence of specifying mtdparts using DTB versus "mtdparts="?
Robert P. J. Day
- [U-Boot] u-boot wiki page on "fdt" command full of "FDT_ERR_BADMAGIC"
Robert P. J. Day
- [U-Boot] in cmd/fdt.c, why is CONFIG_OF_CONTROL described as "temporary #ifdef"?
Robert P. J. Day
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Ricardo Ribalda Delgado
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Ricardo Ribalda Delgado
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Ricardo Ribalda Delgado
- [U-Boot] Potential memory corruption in drivers/net/sh_eth.c ?
Wolfgang Denk
- [U-Boot] Potential memory corruption in drivers/net/sh_eth.c ?
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2016.03 released
Wolfgang Denk
- [U-Boot] [ANN] U-Boot v2016.05-rc1 released
Wolfgang Denk
- [U-Boot] want to clarify a couple things about vendor common/ directories
Wolfgang Denk
- [U-Boot] is there any value to board/dave/ directory?
Wolfgang Denk
- [U-Boot] worth cleaning redundancies out of some board Makefiles?
Wolfgang Denk
- [U-Boot] [PATCH 2/2] board/t4240rdb: some ethernet ports shouldn't be detected
Wolfgang Denk
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Wolfgang Denk
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Wolfgang Denk
- [U-Boot] [PATCH 05/60] pwm: tegra: move header file to driver directory
Wolfgang Denk
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Wolfgang Denk
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Wolfgang Denk
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Wolfgang Denk
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Wolfgang Denk
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Wolfgang Denk
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Wolfgang Denk
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Wolfgang Denk
- [U-Boot] [ANN] v2016.05-rc3
Wolfgang Denk
- [U-Boot] register polling from HUSH parser?
Wolfgang Denk
- [U-Boot] Problem of git clone with http
Wolfgang Denk
- [U-Boot] Problem of git clone with http
Wolfgang Denk
- [U-Boot] register polling from HUSH parser?
Wolfgang Denk
- [U-Boot] Issue with USB mass storage (thumb drives)
Diego
- [U-Boot] Issue with USB mass storage (thumb drives)
Diego
- [U-Boot] Issue with USB mass storage (thumb drives)
Diego
- [U-Boot] Issue with USB mass storage (thumb drives)
Diego
- [U-Boot] Issue with USB mass storage (thumb drives)
Diego
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Angelo Dureghello
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Angelo Dureghello
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Angelo Dureghello
- [U-Boot] [PATCH] mmc: add mmc partconf read capability
Angelo Dureghello
- [U-Boot] [PATCH v2] mmc: add mmc partconf read capability
Angelo Dureghello
- [U-Boot] [PATCH v2] mmc: add mmc partconf read capability
Angelo Dureghello
- [U-Boot] [PATCH v3] mmc: add mmc partconf read capability
Angelo Dureghello
- [U-Boot] [RFC PATCH] arm, m68k: fix out-of-range jump
Angelo Dureghello
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [RFC PATCH] arm, m68k: fix out-of-range jump
Angelo Dureghello
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [PATCH v3 1/2] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [PATCH v3 2/2] m68k: add DM model serial driver
Angelo Dureghello
- [U-Boot] [PATCH v3 1/2] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [PATCH 9/9] dm: fsl_i2c: Enable DM for FSL I2C
Angelo Dureghello
- [U-Boot] [PATCH v3 2/2] m68k: add DM model serial driver
Angelo Dureghello
- [U-Boot] [PATCH 1/2 v4] m68k: add malloc memory for early malloc
Angelo Dureghello
- [U-Boot] [PATCH 2/2 v4] m68k: add DM model serial driver
Angelo Dureghello
- [U-Boot] [PATCH v3 2/2] m68k: add DM model serial driver
Angelo Dureghello
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Fabio Estevam
- [U-Boot] [PATCH] README: Specify the full path for README.video
Fabio Estevam
- [U-Boot] [PATCH] board: ge: bx50v3: Update display setup
Fabio Estevam
- [U-Boot] [PATCH] board: ge: bx50v3: Update display setup
Fabio Estevam
- [U-Boot] [PATCH 1/2] MX6UL: Add definition for UART6 base address
Fabio Estevam
- [U-Boot] [PATCH 2/2] Add initial support for Technexion's PICO-IMX6UL-EMMC board
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH] spl: spl_mmc: Disambiguate error message
Fabio Estevam
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Fabio Estevam
- [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT
Fabio Estevam
- [U-Boot] [PATCH 1/3] phy: Add phy driver support for xilinx PCS/PMA core
Florian Fainelli
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Peng Fan
- [U-Boot] [PATCH V3] common: env: support sata device
Peng Fan
- [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure
Peng Fan
- [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value
Peng Fan
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Peng Fan
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Peng Fan
- [U-Boot] Using U-Boot to load RTOS
Peng Fan
- [U-Boot] Using U-Boot to load RTOS
Peng Fan
- [U-Boot] [PATCH V2] dm: core: device: set pinctrl state for pinctrl device
Peng Fan
- [U-Boot] [PATCH 2/2] dm: gpio: mxc: implement xlate function
Peng Fan
- [U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function
Peng Fan
- [U-Boot] [PATCH 2/2] dm: gpio: introduce 74x164 driver
Peng Fan
- [U-Boot] [PATCH 1/2] dm: spi: soft_spi: support linux way and bug fix
Peng Fan
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH V2 1/3] dm: spi: soft_spi bug fix
Peng Fan
- [U-Boot] [PATCH V2 2/3] dm: spi: soft_spi: switch to use linux compatible string
Peng Fan
- [U-Boot] [PATCH V2 3/3] dm: gpio: introduce 74x164 driver
Peng Fan
- [U-Boot] [PATCH] fdt: Do not report bad cell count when #size-cells = <0>
Peng Fan
- [U-Boot] [PATCH V2] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH V3] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [PATCH V4] dm: gpio: pca953x: introduce driver model support for pca953x
Peng Fan
- [U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function
Peng Fan
- [U-Boot] [PATCH V2 3/3] dm: gpio: introduce 74x164 driver
Peng Fan
- [U-Boot] [PATCH V3 1/4] dm: spi: soft_spi bug fix
Peng Fan
- [U-Boot] [PATCH V3 2/4] dm: spi: soft_spi: switch to use linux compatible string
Peng Fan
- [U-Boot] [PATCH V3 3/4] dm: spi: introduce dm api
Peng Fan
- [U-Boot] [PATCH V3 4/4] dm: gpio: introduce 74x164 driver
Peng Fan
- [U-Boot] [PATCH] dm: gpio: pca953x: Support PCA953X with 40 GPIOs
Peng Fan
- [U-Boot] [PATCH] imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5
Peng Fan
- [U-Boot] [PATCH 1/3] mmc: fsl: reset to normal boot mode when eMMC fast boot
Peng Fan
- [U-Boot] [PATCH 2/3] fsl_esdhc: Update clock enable bits for USDHC
Peng Fan
- [U-Boot] [PATCH 3/3] mmc: fsl: introduce wp_enable
Peng Fan
- [U-Boot] [PATCH] video: ipu_common: fix build error
Peng Fan
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Peng Fan
- [U-Boot] Introduce clk framework
Peng Fan
- [U-Boot] [PATCH] arm: imx-common: introduce back usec2ticks
Peng Fan
- [U-Boot] [PATCH 0/5] tools/env: pass arguments as parameters not global structure
Andreas Fenkart
- [U-Boot] [PATCH 1/5] tools/env: make env_aes_cbc_crypt re-entrant
Andreas Fenkart
- [U-Boot] [PATCH 2/5] tools/env: remove 'extern' from function prototype in fw_env.h
Andreas Fenkart
- [U-Boot] [PATCH 3/5] tools/env: fw_printenv pass value_only as argument
Andreas Fenkart
- [U-Boot] [PATCH 4/5] tools/env: compute size of usable area only once
Andreas Fenkart
- [U-Boot] [PATCH 5/5] tools/env: no global variable sharing between application and library
Andreas Fenkart
- [U-Boot] [PATCH v2 0/5] tools/env: pass arguments as parameters not global structure
Andreas Fenkart
- [U-Boot] [PATCH v2 1/5] tools/env: pass key as argument to env_aes_cbc_crypt
Andreas Fenkart
- [U-Boot] [PATCH v2 2/5] tools/env: remove 'extern' from function prototype in fw_env.h
Andreas Fenkart
- [U-Boot] [PATCH v2 3/5] tools/env: fw_printenv pass value_only as argument
Andreas Fenkart
- [U-Boot] [PATCH v2 4/5] tools/env: compute size of usable area only once
Andreas Fenkart
- [U-Boot] [PATCHv2] sf: params: Add support for n25q016a
Moritz Fischer
- [U-Boot] [PATCHv2][RESEND] spi: Add support for N25016A
Moritz Fischer
- [U-Boot] U-Boot for Galileo Gen 1 Board
Pablo Fonovich
- [U-Boot] U-Boot for Galileo Gen 1 Board
Pablo Fonovich
- [U-Boot] [PATCH] omap3: Reduce logic/overo SPL max image size
Adam Ford
- [U-Boot] spl_mmc: allow to load raw image
Adam Ford
- [U-Boot] [PATCH v2] spl_mmc: allow to load raw image
Adam Ford
- [U-Boot] [PATCH] omap3: Reduce logic/overo SPL max image size
Adam Ford
- [U-Boot] spl_mmc: allow to load raw image
Adam Ford
- [U-Boot] [PATCH] rpi: remove redundant board files
Andreas Färber
- [U-Boot] rockchip: firefly-rk3288 broken - DRAM wrong?
Andreas Färber
- [U-Boot] rockchip: firefly-rk3288 broken - DRAM wrong?
Andreas Färber
- [U-Boot] rockchip: firefly-rk3288 broken - DRAM wrong?
Andreas Färber
- [U-Boot] [PATCH] rpi: remove redundant board files
Andreas Färber
- [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support
Andreas Färber
- [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support
Andreas Färber
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Andreas Färber
- [U-Boot] [PATCH] dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE
Andreas Färber
- [U-Boot] [RFC] efi_loader: Handle 32-bit memory overflows
Andreas Färber
- [U-Boot] [PATCH] efi_loader: Add debug output for efi_add_memory_map()
Andreas Färber
- [U-Boot] [RFC] efi_loader: Handle 32-bit memory overflows
Andreas Färber
- [U-Boot] [PATCH v2] efi_loader: Handle memory overflows
Andreas Färber
- [U-Boot] [PATCH] dragonboard410c: Fix environment variables
Andreas Färber
- [U-Boot] [PATCH] dragonboard410c: Fix environment variables
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH 1/2] efi_loader: Put fdt into convenient location
Andreas Färber
- [U-Boot] [PATCH 2/2] efi_loader: Expose ascending efi memory map
Andreas Färber
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH 1/2] efi_loader: Put fdt into convenient location
Andreas Färber
- [U-Boot] [PATCH] efi_loader: Use system fdt as fallback
Andreas Färber
- [U-Boot] [PATCH 0/8] efi_loader: Support loading from El Torito isos
Andreas Färber
- [U-Boot] [PATCH] efi_loader: Use system fdt as fallback
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH] mmc: add mmc partconf read capability
Andreas Färber
- [U-Boot] efi_loader: Add distro boot script for removable media
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Andreas Färber
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Andreas Färber
- [U-Boot] [PATCH 2/2] efi_loader: Fall back to fdtfile naming convention
Andreas Färber
- [U-Boot] [PATCH v2 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Andreas Färber
- [U-Boot] [PATCH v2 2/2] efi_loader: Fall back to fdtfile naming convention
Andreas Färber
- [U-Boot] [PATCH v2] mmc: add mmc partconf read capability
Andreas Färber
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Andreas Färber
- [U-Boot] [PATCH] env_ext4: fix build error.
Andreas Färber
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Andreas Färber
- [U-Boot] [PATCH 2/2] serial_sh: Add standrad SCI (w/o FIFO) support
Andreas Färber
- [U-Boot] [PATCH v2 0/9] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
- [U-Boot] [PATCH v2 1/9] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v2 2/9] arm: dts: import Meson files
Beniamino Galvani
- [U-Boot] [PATCH v2 3/9] serial: add support for Amlogic Meson UART
Beniamino Galvani
- [U-Boot] [PATCH v2 4/9] arm: meson: use device tree
Beniamino Galvani
- [U-Boot] [PATCH v2 5/9] board: odroid-c2: enable serial
Beniamino Galvani
- [U-Boot] [PATCH v2 6/9] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v2 7/9] net: designware: add generic device tree compatible id
Beniamino Galvani
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Beniamino Galvani
- [U-Boot] [PATCH v2 9/9] board: odroid-c2: add Ethernet support
Beniamino Galvani
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Beniamino Galvani
- [U-Boot] [PATCH v2 5/9] board: odroid-c2: enable serial
Beniamino Galvani
- [U-Boot] [PATCH v3 0/2] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
- [U-Boot] [PATCH v3 1/2] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v2 9/9] board: odroid-c2: add Ethernet support
Beniamino Galvani
- [U-Boot] [PATCH v3 1/2] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v4 0/3] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v4 2/3] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v4 3/3] arm: meson: implement calls to secure monitor
Beniamino Galvani
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v4 3/3] arm: meson: implement calls to secure monitor
Beniamino Galvani
- [U-Boot] [PATCH v4 3/3] arm: meson: implement calls to secure monitor
Beniamino Galvani
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v5 0/4] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
- [U-Boot] [PATCH v5 1/4] arm: implement generic PSCI reset call for armv8
Beniamino Galvani
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v5 3/4] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v5 4/4] arm: meson: implement calls to secure monitor
Beniamino Galvani
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v5 3/4] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v6 0/4] Amlogic Meson GXBaby and ODROID-C2 support
Beniamino Galvani
- [U-Boot] [PATCH v6 1/4] arm: implement generic PSCI reset call for armv8
Beniamino Galvani
- [U-Boot] [PATCH v6 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Beniamino Galvani
- [U-Boot] [PATCH v6 3/4] arm: add initial support for Amlogic Meson and ODROID-C2
Beniamino Galvani
- [U-Boot] [PATCH v6 4/4] arm: meson: implement calls to secure monitor
Beniamino Galvani
- [U-Boot] [PATCH 1/2] powerpc/mpc85xx: SECURE BOOT- Enable chain of trust in SPL
Sumit Garg
- [U-Boot] [PATCH 2/2] powerpc/mpc85xx: T104x: Add nand secure boot target
Sumit Garg
- [U-Boot] [PATCH] mmc: rmobile: add a compiler barrier
Yannick Gicquel
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Dennis Gilmore
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Simon Glass
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Simon Glass
- [U-Boot] [PATCH] common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE
Simon Glass
- [U-Boot] [PATCH] test/py: pass -v option when executing sandbox
Simon Glass
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH 0/2] cmd: fdt: Add device tree overlays support
Simon Glass
- [U-Boot] [PATCH v1] tpm: Fix uclass_first_device error handling
Simon Glass
- [U-Boot] [RFC] SPL -> U-Boot Chain of Trust
Simon Glass
- [U-Boot] [PATCH v2] tpm: Fix uclass_first_device error handling
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH] disk: part: Enable get_info pointer for CONFIG_SPL_FAT_SUPPORT
Simon Glass
- [U-Boot] [PATCH] WIP: Example changes to build EFI stub for x86
Simon Glass
- [U-Boot] [PATCH] WIP: Example changes to build EFI stub for x86
Simon Glass
- [U-Boot] EFI Stub compilation errors
Simon Glass
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Simon Glass
- [U-Boot] [PATCH] fdt: implement dev_get_addr_name()
Simon Glass
- [U-Boot] A problem about 'sf probe' using DM_SPI
Simon Glass
- [U-Boot] [PATCH 1/3] drivers: block: Kconfig: set default n to CONFIG_DISK
Simon Glass
- [U-Boot] [PATCH] dm: part: fix missing driver name in debug print
Simon Glass
- [U-Boot] [PATCH v2 1/2] doc: driver-model: Update dm tests run using test.py
Simon Glass
- [U-Boot] [PATCH v2 2/2] board: README.sandbox: Update dm test command
Simon Glass
- [U-Boot] [PATCH V2] dm: core: device: set pinctrl state for pinctrl device
Simon Glass
- [U-Boot] [PATCH] dm: part: fix missing driver name in debug print
Simon Glass
- [U-Boot] [PATCH] dm: device.c: Minor coding-style fix
Simon Glass
- [U-Boot] [PATCH v2 1/2] doc: driver-model: Update dm tests run using test.py
Simon Glass
- [U-Boot] [PATCH v2 2/2] board: README.sandbox: Update dm test command
Simon Glass
- [U-Boot] [PATCH] test/dm/core.c: Make pre-reloc test use pre-reloc struct
Simon Glass
- [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache
Simon Glass
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Simon Glass
- [U-Boot] [PATCH 1/2] dm: spi: soft_spi: support linux way and bug fix
Simon Glass
- [U-Boot] [PATCH 2/2] dm: gpio: introduce 74x164 driver
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH 2/7] gpio: intel_broadwell: remove gpio_xlate routine
Simon Glass
- [U-Boot] [PATCH 3/7] gpio: omap: remove gpio_xlate routine
Simon Glass
- [U-Boot] [PATCH 4/7] gpio: pic32: remove gpio_xlate routine
Simon Glass
- [U-Boot] [PATCH 5/7] gpio: rk: remove gpio_xlate routine
Simon Glass
- [U-Boot] [PATCH 6/7] gpio: exynos(s5p): remove gpio_xlate routine
Simon Glass
- [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
Simon Glass
- [U-Boot] [PATCH 06/10] drivers: usb: common: add support to get maximum speed from dt
Simon Glass
- [U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function
Simon Glass
- [U-Boot] [RFC 2/2] dm: mmc: implement pwrup function
Simon Glass
- [U-Boot] [PATCH v8 4/9] drivers: pinctrl: Add simple pinctrl driver for QCA/Athores ar933x.
Simon Glass
- [U-Boot] [PATCH v8 5/9] drivers: pinctrl: Add simple pinctrl driver for QCA/Athores qca953x.
Simon Glass
- [U-Boot] [PATCH v8 6/9] drivers: serial: add serial driver for ar933x SOC
Simon Glass
- [U-Boot] [PATCH] serial: add BCM283x mini UART driver
Simon Glass
- [U-Boot] mtd; spi-nor: Probing dual uclass drivers from cmd
Simon Glass
- [U-Boot] [PATCH v3 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.
Simon Glass
- [U-Boot] [PATCH 2/5] arm: lib: Drop underscore from private libgcc filenames
Simon Glass
- [U-Boot] [PATCH 1/5] arm: include: Import unified.h from Linux kernel
Simon Glass
- [U-Boot] [PATCH 3/5] arm: lib: Sync libgcc shift operations
Simon Glass
- [U-Boot] [PATCH 4/5] arm: lib: Sync libgcc 32b division/modulo operations
Simon Glass
- [U-Boot] [PATCH 5/6] i2c: designware_i2c: Add DM support
Simon Glass
- [U-Boot] [PATCH] dm: i2c: mxc_i2c: implement i2c_idle_bus
Simon Glass
- [U-Boot] [PATCH v2] dm: usb: Do not reprobe usb hosts on "usb tree" command
Simon Glass
- [U-Boot] [PATCH V3] common: env: support sata device
Simon Glass
- [U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point
Simon Glass
- [U-Boot] [PATCH 1/2] dm: gpio: mxc: fix mxc_gpio_bank_get_value
Simon Glass
- [U-Boot] [PATCH 01/11] drivers: core: device: add support to check dt compatible for a device/machine
Simon Glass
- [U-Boot] [PATCH 02/11] lib: fdtdec: fix size cell and address cell parse from DT
Simon Glass
- [U-Boot] [PATCH 03/11] ti_omap5_common: eth: do not define DM_ETH for spl
Simon Glass
- [U-Boot] [RFC PATCH 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Simon Glass
- [U-Boot] [RFC PATCH 2/2] spl: Support loading a FIT from FAT FS
Simon Glass
- [U-Boot] [PATCH 1/2] pinctrl: add the DM_UC_FLAG_SEQ_ALIAS flag for numbering the devices
Simon Glass
- [U-Boot] [PATCH 2/2] pinctrl: Add pinctrl driver support for Exynos7420 SoC
Simon Glass
- [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH RESEND 1/2] cmd: fdt: Narrow the check for fdt addr
Simon Glass
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Simon Glass
- [U-Boot] [PATCH 00/44] dm: blk: Add more driver-model support for block devices
Simon Glass
- [U-Boot] [PATCH 01/44] Revert "dm: sandbox: Drop the pre-DM host implementation"
Simon Glass
- [U-Boot] [PATCH 02/44] dm: sandbox: Add a board for sandbox without CONFIG_BLK
Simon Glass
- [U-Boot] [PATCH 03/44] pci: Drop CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
Simon Glass
- [U-Boot] [PATCH 04/44] dm: Rename disk uclass to ahci
Simon Glass
- [U-Boot] [PATCH 05/44] Allow iotrace byte access to use an address of any size
Simon Glass
- [U-Boot] [PATCH 06/44] sandbox: Add string and 16-bit I/O functions
Simon Glass
- [U-Boot] [PATCH 07/44] sandbox: Add dummy SCSI functions
Simon Glass
- [U-Boot] [PATCH 08/44] sandbox: Add dummy SATA functions
Simon Glass
- [U-Boot] [PATCH 09/44] dm: scsi: Remove the forward declarations
Simon Glass
- [U-Boot] [PATCH 10/44] dm: scsi: Fix up code style
Simon Glass
- [U-Boot] [PATCH 11/44] dm: ide: Correct various code style problems
Simon Glass
- [U-Boot] [PATCH 12/44] dm: ide: Remove the forward declarations
Simon Glass
- [U-Boot] [PATCH 13/44] dm: sata: Fix code style problems in cmd/sata.c
Simon Glass
- [U-Boot] [PATCH 14/44] dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
Simon Glass
- [U-Boot] [PATCH 15/44] dm: blk: Add a legacy block interface
Simon Glass
- [U-Boot] [PATCH 16/44] dm: systemace: Add a legacy block interface
Simon Glass
- [U-Boot] [PATCH 17/44] dm: sandbox: Add a legacy host block interface
Simon Glass
- [U-Boot] [PATCH 18/44] dm: usb: Add a legacy block interface for USB storage
Simon Glass
- [U-Boot] [PATCH 19/44] dm: mmc: Add a legacy block interface for MMC
Simon Glass
- [U-Boot] [PATCH 20/44] dm: mmc: Add an implementation of the 'devnum' functions
Simon Glass
- [U-Boot] [PATCH 21/44] dm: scsi: Separate the non-command code into its own file
Simon Glass
- [U-Boot] [PATCH 22/44] dm: ide: Separate the non-command code into its own file
Simon Glass
- [U-Boot] [PATCH 23/44] dm: sata: Separate the non-command code into its own file
Simon Glass
- [U-Boot] [PATCH 24/44] dm: disk: Use legacy block driver info for block device access
Simon Glass
- [U-Boot] [PATCH 25/44] dm: usb: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 26/44] dm: ide: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 27/44] dm: mmc: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 28/44] dm: scsi: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 29/44] dm: sata: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 30/44] dm: systemace: Drop the get_dev() function
Simon Glass
- [U-Boot] [PATCH 31/44] dm: blk: Drop the systemace.h header
Simon Glass
- [U-Boot] [PATCH 32/44] dm: sandbox: Drop the host_get_dev() function
Simon Glass
- [U-Boot] [PATCH 33/44] dm: part: Drop the get_dev() method
Simon Glass
- [U-Boot] [PATCH 34/44] dm: ide: Add support for driver-model block devices
Simon Glass
- [U-Boot] [PATCH 35/44] dm: sandbox: Enable IDE
Simon Glass
- [U-Boot] [PATCH 36/44] dm: scsi: Add support for driver-model block devices
Simon Glass
- [U-Boot] [PATCH 37/44] dm: sandbox: Enable SCSI
Simon Glass
- [U-Boot] [PATCH 38/44] dm: sata: Add support for driver-model block devices
Simon Glass
- [U-Boot] [PATCH 39/44] dm: sandbox: Enable SATA
Simon Glass
- [U-Boot] [PATCH 40/44] dm: blk: Allow blk_create_device() to allocate the device number
Simon Glass
- [U-Boot] [PATCH 41/44] dm: blk: Add a easier way to create a named block device
Simon Glass
- [U-Boot] [PATCH 42/44] dm: systemace: Reorder function to avoid forward declarataions
Simon Glass
- [U-Boot] [PATCH 43/44] dm: systemace: Add driver-mode block-device support
Simon Glass
- [U-Boot] [PATCH 44/44] dm: sandbox: Enable systemace
Simon Glass
- [U-Boot] [PATCH 00/23] dm: mmc: Add driver-model block-device support to MMC
Simon Glass
- [U-Boot] [PATCH 01/23] dm: blk: Fix allocation of block-device numbering
Simon Glass
- [U-Boot] [PATCH 02/23] dm: core: Allow device names to be freed automatically
Simon Glass
- [U-Boot] [PATCH 03/23] dm: blk: Free the block device name when unbound
Simon Glass
- [U-Boot] [PATCH 04/23] dm: mmc: Move mmc_switch_part() above its callers
Simon Glass
- [U-Boot] [PATCH 05/23] dm: mmc: Implement the select_hwpart() method
Simon Glass
- [U-Boot] [PATCH 06/23] dm: mmc: Add a function to obtain the block device
Simon Glass
- [U-Boot] [PATCH 07/23] dm: mmc: spl: Use the legacy block interface in SPL
Simon Glass
- [U-Boot] [PATCH 08/23] dm: mmc: Use the new select_hwpart() API
Simon Glass
- [U-Boot] [PATCH 09/23] dm: blk: Add functions to select a hardware partition
Simon Glass
- [U-Boot] [PATCH 10/23] dm: part: Use the legacy block driver for hardware partition support
Simon Glass
- [U-Boot] [PATCH 11/23] dm: part: Drop the block_drvr table
Simon Glass
- [U-Boot] [PATCH 12/23] dm: blk: Add a comment as to why the bdev member is needed
Simon Glass
- [U-Boot] [PATCH 13/23] dm: mmc: Set up the device pointer when using the MMC uclass
Simon Glass
- [U-Boot] [PATCH 14/23] dm: mmc: Move the device list into a separate file
Simon Glass
- [U-Boot] [PATCH 15/23] dm: blk: Use the correct error code for blk_get_device_by_str()
Simon Glass
- [U-Boot] [PATCH 16/23] dm: mmc: Adjust mmc_switch_part() to use a struct mmc
Simon Glass
- [U-Boot] [PATCH 17/23] dm: sandbox: Only enable the sandbox MMC driver when valid
Simon Glass
- [U-Boot] [PATCH 18/23] dm: mmc: Implement the MMC functions for block devices
Simon Glass
- [U-Boot] [PATCH 19/23] dm: mmc: Add a way to bind MMC devices with driver model
Simon Glass
- [U-Boot] [PATCH 20/23] dm: mmc: Add support for driver-model block devices
Simon Glass
- [U-Boot] [PATCH 21/23] dm: mmc: sandbox: Add an SD-card emulation
Simon Glass
- [U-Boot] [PATCH 22/23] dm: sandbox: mmc: Enable building MMC code for sandbox
Simon Glass
- [U-Boot] [PATCH 23/23] dm: mmc: test: Add tests for MMC
Simon Glass
- [U-Boot] [PATCH] serial: add BCM283x mini UART driver
Simon Glass
- [U-Boot] [PATCH] lib/crc8: Add crc start value
Simon Glass
- [U-Boot] [PATCH] buildman: allow more incremental building
Simon Glass
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH] buildman: allow more incremental building
Simon Glass
- [U-Boot] [ANN] U-Boot v2016.05-rc1 released
Simon Glass
- [U-Boot] [PATCH 1/1] drivers: usb: common: add common code for usb drivers to use
Simon Glass
- [U-Boot] [PATCH 1/3] drivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variable use
Simon Glass
- [U-Boot] [PATCH v3] i2c: designware_i2c: Prepare for DM driver conversion
Simon Glass
- [U-Boot] [PATCH 01/10] drivers: usb: dwc3: remove devm_zalloc from linux_compact
Simon Glass
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Simon Glass
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Simon Glass
- [U-Boot] [PATCH] sandbox: Enable many more commands
Simon Glass
- [U-Boot] [PATCH] fdt: implement dev_get_addr_name()
Simon Glass
- [U-Boot] [PATCH 1/3] drivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variable use
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH 01/10] drivers: usb: dwc3: remove devm_zalloc from linux_compact
Simon Glass
- [U-Boot] [PATCH] ARM: dts: uniphier: move aliases node up to make fdtgrep happy
Simon Glass
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Simon Glass
- [U-Boot] [PATCH 2/2] video: tegra: refuse to bind to disabled dcs
Simon Glass
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Simon Glass
- [U-Boot] cli_simple_run_command results in an unknown reference to "do_bootd" or "parse_string_outer"
Simon Glass
- [U-Boot] [PATCH 1/9] include: nand: move endif to end of file
Simon Glass
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Simon Glass
- [U-Boot] [PATCH 6/9] am43xx_evm: nand: do not define DM_NAND for spl
Simon Glass
- [U-Boot] [PATCH 7/9] defconfig: am437x_gp_evm: enable NAND driver model
Simon Glass
- [U-Boot] [PATCH 8/9] am335x_evm: nand: do not define DM_NAND for spl
Simon Glass
- [U-Boot] [PATCH 9/9] defconfig: am335x_gp_evm: enable NAND driver model
Simon Glass
- [U-Boot] [PATCH 1/5] drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Simon Glass
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Simon Glass
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Simon Glass
- [U-Boot] [RFC 1/2] mmc: introduce mmc_power_init and pwrup hook function
Simon Glass
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Simon Glass
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Simon Glass
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Simon Glass
- [U-Boot] [PATCH 1/4] ath79: spi: Remove the explicit pinctrl setting
Simon Glass
- [U-Boot] [PATCH 2/4] ar933x: serial: Remove the explicit pinctrl setting
Simon Glass
- [U-Boot] [PATCH 01/11] spi: davinci_spi: Convert to driver to adapt to DM
Simon Glass
- [U-Boot] [PATCH V2 1/3] dm: spi: soft_spi bug fix
Simon Glass
- [U-Boot] [PATCH V2 2/3] dm: spi: soft_spi: switch to use linux compatible string
Simon Glass
- [U-Boot] [PATCH V2 3/3] dm: gpio: introduce 74x164 driver
Simon Glass
- [U-Boot] A problem about 'sf probe' using DM_SPI
Simon Glass
- [U-Boot] [PATCH 3/9] clk: fixed_rate: allow driver usage prior to relocation
Simon Glass
- [U-Boot] [PATCH 4/9] clk: exynos: add clock driver for Exynos7420 Soc
Simon Glass
- [U-Boot] [PATCH 5/9] serial: s5p: get the port id number from the alias of the device node
Simon Glass
- [U-Boot] [PATCH 6/9] serial: s5p: use clock api to get clock rate
Simon Glass
- [U-Boot] [PATCH v2 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Simon Glass
- [U-Boot] [PATCH 8/9] arm: exynos: add support for Exynos7420 SoC
Simon Glass
- [U-Boot] [PATCH 9/9] board: samsung: add initial Espresso7420 board support
Simon Glass
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Simon Glass
- [U-Boot] [PATCH] serial: bcm283x_mu: make pending values more explicit
Simon Glass
- [U-Boot] [PATCH v3 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Simon Glass
- [U-Boot] [PATCH] ahci: flush dcache before issuing command
Simon Glass
- [U-Boot] [PATCH 4/4] i2c: muxes: Add support for TI PCA954X mux
Simon Glass
- [U-Boot] [PATCH] dm: fdtdec: Check full path for alias
Simon Glass
- [U-Boot] [PATCH 1/2] cmd: Kconfig: Add a Kconfig options for a few CMD
Simon Glass
- [U-Boot] [PATCH 1/2] dm: core: allow drivers to refuse to bind
Simon Glass
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Simon Glass
- [U-Boot] [PATCH] dm: core: Add dev_get_addr_ptr() to return a pointer to the reg address
Simon Glass
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Simon Glass
- [U-Boot] [PATCH] Revert "rockchip: rk3288: correct sdram setting"
Simon Glass
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Simon Glass
- [U-Boot] [PATCH 03/60] mmc: tegra: move header file to driver directory
Simon Glass
- [U-Boot] [PATCH 04/60] mmc: tegra: move public header to arch/arm/mach-tegra/include
Simon Glass
- [U-Boot] [PATCH 05/60] pwm: tegra: move header file to driver directory
Simon Glass
- [U-Boot] [PATCH 06/60] i2c: tegra: move header file to driver directory
Simon Glass
- [U-Boot] [PATCH 07/60] usb: tegra: move header file to driver directory
Simon Glass
- [U-Boot] [PATCH 08/60] video: tegra: move header file to driver directory
Simon Glass
- [U-Boot] [PATCH 09/60] ARM: tegra: correct 64-bit DT unit addresses
Simon Glass
- [U-Boot] [PATCH 10/60] ARM: tegra: sort DT /aliases entries
Simon Glass
- [U-Boot] [PATCH 11/60] ARM: tegra: add DT alias for GPIO controller
Simon Glass
- [U-Boot] [PATCH 12/60] gpio: tegra: remove duplicate define
Simon Glass
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Simon Glass
- [U-Boot] [PATCH 14/60] ARM: tegra: use DT bindings for GPIO naming
Simon Glass
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Simon Glass
- [U-Boot] [PATCH 16/60] ARM: tegra: migrate TEGRA_GPIO to Kconfig
Simon Glass
- [U-Boot] [PATCH 17/60] ARM: tegra: move apb_misc.h
Simon Glass
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Simon Glass
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Simon Glass
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Simon Glass
- [U-Boot] [PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Simon Glass
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Simon Glass
- [U-Boot] [PATCH 17/60] ARM: tegra: move apb_misc.h
Simon Glass
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Simon Glass
- [U-Boot] [PATCH 18/60] ARM: tegra: move fuse.h
Simon Glass
- [U-Boot] [PATCH 19/60] ARM: tegra: move gpu.h
Simon Glass
- [U-Boot] [PATCH 20/60] ARM: tegra: move pmc.h
Simon Glass
- [U-Boot] [PATCH 21/60] ARM: tegra: move scu.h
Simon Glass
- [U-Boot] [PATCH 22/60] ARM: tegra: move warmboot.h
Simon Glass
- [U-Boot] [PATCH 23/60] ARM: tegra: move xusb-padctl.h to <mach/>
Simon Glass
- [U-Boot] [PATCH 24/60] ARM: tegra: unify+move {board, sys_proto}.h to <mach/>
Simon Glass
- [U-Boot] [PATCH 25/60] ARM: tegra: use consistently named include guards
Simon Glass
- [U-Boot] [PATCH 26/60] ARM: tegra: delete unused headers
Simon Glass
- [U-Boot] [PATCH 27/60] ARM: tegra: move emc.h
Simon Glass
- [U-Boot] [PATCH 28/60] ARM: tegra: move sdram_param.h
Simon Glass
- [U-Boot] [PATCH 29/60] ARM: tegra: move sysctr.h
Simon Glass
- [U-Boot] [PATCH 30/60] ARM: tegra: remove pmu.h
Simon Glass
- [U-Boot] [PATCH 32/60] ARM: tegra: add SoC-specific include directory
Simon Glass
- [U-Boot] [PATCH 33/60] ARM: tegra: fix bug in Tegra20 flow.h
Simon Glass
- [U-Boot] [PATCH 34/60] ARM: tegra: move flow.h
Simon Glass
- [U-Boot] [PATCH 35/60] nyan-big: remove direct MC register access
Simon Glass
- [U-Boot] [PATCH v2 1/2] m68k: add malloc memory for early malloc
Simon Glass
- [U-Boot] [PATCH 36/60] ARM: tegra: move mc.h
Simon Glass
- [U-Boot] [PATCH 31/60] ARM: tegra: move powergate.h to <mach/>
Simon Glass
- [U-Boot] [PATCH] pci: Device scanning range fix.
Simon Glass
- [U-Boot] [PATCH v3 4/8] serial: s5p: get the port id number from the alias of the device node
Simon Glass
- [U-Boot] [PATCH v3 6/8] arm: exynos: realign the code to allow support for newer 64-bit platforms
Simon Glass
- [U-Boot] [PATCH v3 3/8] clk: exynos: add clock driver for Exynos7420 Soc
Simon Glass
- [U-Boot] [PATCH V4] dm: gpio: pca953x: introduce driver model support for pca953x
Simon Glass
- [U-Boot] [PATCH 37/60] ARM: tegra: move SDIOCFG_DRV* to pinmux.h
Simon Glass
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Simon Glass
- [U-Boot] [PATCH] Revert "rockchip: rk3288: correct sdram setting"
Simon Glass
- [U-Boot] [PATCH V2] buildman: allow more incremental building
Simon Glass
- [U-Boot] [PATCH] sandbox: Set CONFIG_SYS_CPU
Simon Glass
- [U-Boot] [PATCH] ARM: tegra: import latest Jetson TK1 spreadsheet
Simon Glass
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Simon Glass
- [U-Boot] [PATCH v3 2/2] m68k: add DM model serial driver
Simon Glass
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Simon Glass
- [U-Boot] Please pull u-boot-rockchip
Simon Glass
- [U-Boot] Please pull u-boot-dm
Simon Glass
- [U-Boot] [PATCH v3 2/2] m68k: add DM model serial driver
Simon Glass
- [U-Boot] [RFC] SPL -> U-Boot Chain of Trust
Simon Glass
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Simon Glass
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Simon Glass
- [U-Boot] [RFC PATCH] gpio: add Tegra186 GPIO driver
Simon Glass
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_ptr() to return a pointer to the reg address
Simon Glass
- [U-Boot] [PATCH] pci: tegra: fix DM conversion issues on Tegra20
Simon Glass
- [U-Boot] [PATCH V4, 1/6] dm: gpio: add a default gpio xlate routine
Simon Glass
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Simon Glass
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Simon Glass
- [U-Boot] [PATCH v2] kbuild: Do not append dtb for OF_EMBED case
Simon Glass
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Simon Glass
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Simon Glass
- [U-Boot] [PATCH 1/2 v4] m68k: add malloc memory for early malloc
Simon Glass
- [U-Boot] [PATCH 2/2 v4] m68k: add DM model serial driver
Simon Glass
- [U-Boot] [RFC PATCH] gpio: add Tegra186 GPIO driver
Simon Glass
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Simon Glass
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Simon Glass
- [U-Boot] [PATCH] fdt: fix dev_get_addr_name node offset
Simon Glass
- [U-Boot] [PATCH 1/2 v4] m68k: add malloc memory for early malloc
Simon Glass
- [U-Boot] [PATCH 2/2 v4] m68k: add DM model serial driver
Simon Glass
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Simon Glass
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Simon Glass
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Simon Glass
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Simon Glass
- [U-Boot] [verified-boot] Compile 'key store' DTB without mkimage and private key
Simon Glass
- [U-Boot] [PATCH v4 20/21] board: Add Qualcomm Dragonboard 410C support
Daniel Glöckner
- [U-Boot] Please pull u-boot-sunxi master
Hans de Goede
- [U-Boot] [PATCH 1/3] musb: sunxi: Do not allocate musb struct multiple times
Hans de Goede
- [U-Boot] [PATCH 2/3] musb: Properly call musb_stop() on probe failure
Hans de Goede
- [U-Boot] [PATCH 3/3] dm: usb: Do not reprobe usb hosts on "usb tree" command
Hans de Goede
- [U-Boot] [PATCH 1/3] sunxi: Add INITIAL_USB_SCAN_DELAY Kconfig option
Hans de Goede
- [U-Boot] [PATCH 2/3] sunxi: Set DCDC1 to 3.3V on the Sinovoip BPI M3
Hans de Goede
- [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3
Hans de Goede
- [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling
Hans de Goede
- [U-Boot] [PATCH 1/3] musb: sunxi: Do not allocate musb struct multiple times
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi master
Hans de Goede
- [U-Boot] [PATCH v2] dm: usb: Do not reprobe usb hosts on "usb tree" command
Hans de Goede
- [U-Boot] [PATCH] usb: kbd: Do not deregister usbkbd twice when using dm
Hans de Goede
- [U-Boot] [PATCH] sunxi: Enable CMD_GPIO on all sunxi boards
Hans de Goede
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [PATCH 2/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [U-Boot, 1/3] musb: sunxi: Do not allocate musb struct multiple times
Hans de Goede
- [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3
Hans de Goede
- [U-Boot] [PATCH] sunxi: Enable CMD_GPIO on all sunxi boards
Hans de Goede
- [U-Boot] [U-Boot, 1/3] musb: sunxi: Do not allocate musb struct multiple times
Hans de Goede
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] Ethernet via USB on Sinlinx SinA33
Hans de Goede
- [U-Boot] ITEAD Board (A20) fails to communicate on boot unless UART is connected
Hans de Goede
- [U-Boot] [PATCH v2 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [PATCH v2 2/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code
Hans de Goede
- [U-Boot] [PATCH 3/3] sunxi: Enable usb ports on the Sinovoip BPI M3
Hans de Goede
- [U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove
Hans de Goede
- [U-Boot] [PATCH] sunxi: Add defconfig and dts file for Orange Pi One SBC
Hans de Goede
- [U-Boot] [PATCH] sunxi: H3: Do not clear usb companion clk-gate / reset on remove
Hans de Goede
- [U-Boot] Ethernet via USB on Sinlinx SinA33
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi master
Hans de Goede
- [U-Boot] [PATCH] sunxi: Enable LDO3 at 3.3V on A13-OLinuXino board
Hans de Goede
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Hans de Goede
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Hans de Goede
- [U-Boot] SYS_MALLOC_SIMPLE versus SPL_SYS_MALLOC_SIMPLE?
Hans de Goede
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Hans de Goede
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Hans de Goede
- [U-Boot] Please pull u-boot-sunxi master
Hans de Goede
- [U-Boot] A problem about 'sf probe' using DM_SPI
Qianyu Gong
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Qianyu Gong
- [U-Boot] A problem about 'sf probe' using DM_SPI
Qianyu Gong
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Qianyu Gong
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Qianyu Gong
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Alexander Graf
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Alexander Graf
- [U-Boot] rockchip: firefly-rk3288 broken - DRAM wrong?
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Alexander Graf
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Alexander Graf
- [U-Boot] [PATCH 0/8] efi_loader: Support loading from El Torito isos
Alexander Graf
- [U-Boot] [PATCH 1/8] iso: Make little endian and 64bit safe
Alexander Graf
- [U-Boot] [PATCH 2/8] iso: Start with partition 1
Alexander Graf
- [U-Boot] [PATCH 3/8] iso: Allow 512 byte sector size
Alexander Graf
- [U-Boot] [PATCH 4/8] efi_loader: Split drive add into function
Alexander Graf
- [U-Boot] [PATCH 5/8] efi_loader: Add el torito support
Alexander Graf
- [U-Boot] [PATCH 6/8] efi_loader: Pass file path to payload
Alexander Graf
- [U-Boot] [PATCH 7/8] efi_loader: Increase path string to 32 characters
Alexander Graf
- [U-Boot] [PATCH 8/8] distro: Enable iso partition code
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Use system fdt as fallback
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Alexander Graf
- [U-Boot] [PATCH 1/2] efi_loader: Put fdt into convenient location
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: Expose ascending efi memory map
Alexander Graf
- [U-Boot] [RFC] efi_loader: Handle 32-bit memory overflows
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Add debug output for efi_add_memory_map()
Alexander Graf
- [U-Boot] [RFC] efi_loader: Handle 32-bit memory overflows
Alexander Graf
- [U-Boot] [PATCH v2] efi_loader: Handle memory overflows
Alexander Graf
- [U-Boot] [PATCH] efi_loader: Use system fdt as fallback
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] efi_loader: Add distro boot script for removable media
Alexander Graf
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Alexander Graf
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: Fall back to fdtfile naming convention
Alexander Graf
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Alexander Graf
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Alexander Graf
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Alexander Graf
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Alexander Graf
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: Fall back to fdtfile naming convention
Alexander Graf
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Alexander Graf
- [U-Boot] [PATCH 2/2] efi_loader: Fall back to fdtfile naming convention
Alexander Graf
- [U-Boot] [PATCH v2 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Alexander Graf
- [U-Boot] [PATCH v2 2/2] efi_loader: Fall back to fdtfile naming convention
Alexander Graf
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Alexander Graf
- [U-Boot] [PATCH v4 3/3] arm: meson: implement calls to secure monitor
Alexander Graf
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Alexander Graf
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Alexander Graf
- [U-Boot] igep0030_nand_defconfig compile is broken
Alexander Graf
- [U-Boot] [PATCH] distro: Disable iso partition format for SPL
Alexander Graf
- [U-Boot] [PATCH] distro: Disable iso partition format for SPL
Alexander Graf
- [U-Boot] [PATCH 0/7] hikey
Peter Griffin
- [U-Boot] [PATCH 1/7] ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.
Peter Griffin
- [U-Boot] [PATCH 2/7] MAINTAINERS: Add myself as maintainer for hikey
Peter Griffin
- [U-Boot] [PATCH 3/7] ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Peter Griffin
- [U-Boot] [PATCH 4/7] ARM: hisilicon: hikey: Implement reset_cpu() for hikey.
Peter Griffin
- [U-Boot] [PATCH 5/7] ARM: hisilicon: hikey: dts: Add pl011 additional clock binding.
Peter Griffin
- [U-Boot] [PATCH 6/7] ARM: hisilicon: hikey: Align memory node with upstream kernel
Peter Griffin
- [U-Boot] [PATCH 7/7] ARM: hikey: Simplify README instructions.
Peter Griffin
- [U-Boot] Mainline u-boot installation on Odroid-UX4
Shawn Guo
- [U-Boot] Mainline u-boot installation on Odroid-UX4
Shawn Guo
- [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
Shawn Guo
- [U-Boot] Using U-Boot to load RTOS
Niti Gupta
- [U-Boot] Using U-Boot to load RTOS
Niti Gupta
- [U-Boot] Using U-Boot to load RTOS
Niti Gupta
- [U-Boot] Using U-Boot to load RTOS
Niti Gupta
- [U-Boot] Using U-Boot to load RTOS
Niti Gupta
- [U-Boot] Problem of git clone with http
Anatolij Gustschin
- [U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
Anatolij Gustschin
- [U-Boot] [PATCH] spi: spi-uclass: fix typo in debug output
Anatolij Gustschin
- [U-Boot] [PATCH] drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definition
Anatolij Gustschin
- [U-Boot] Please pull: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] video: ipu_common: fix build error
Anatolij Gustschin
- [U-Boot] [PATCH v3 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Anatolij Gustschin
- [U-Boot] [PATCH v3 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Anatolij Gustschin
- [U-Boot] Please pull: u-boot-video/master
Anatolij Gustschin
- [U-Boot] [PATCH] tools: env: fix config file loading in env library
Anatolij Gustschin
- [U-Boot] change the relocate address of u-boot
Marwa Hamza
- [U-Boot] Fwd: change the relocate address of u-boot
Marwa Hamza
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Rob Herring
- [U-Boot] [PATCH v2 6/9] net: designware: fix descriptor layout and warnings on 64-bit archs
Joe Hershberger
- [U-Boot] [PATCH 2/6 v3] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375
Joe Hershberger
- [U-Boot] [PATCH v2 7/9] net: designware: add generic device tree compatible id
Joe Hershberger
- [U-Boot] [PATCH v2 9/9] board: odroid-c2: add Ethernet support
Joe Hershberger
- [U-Boot] [PATCH 0/6] Remove calls from net drivers to legacy miiphy_register() entry-point
Joe Hershberger
- [U-Boot] [PATCH 1/6] common: Always include errno.h in common.h
Joe Hershberger
- [U-Boot] [PATCH 2/6] scripts: Add a cocci patch for miiphy_register
Joe Hershberger
- [U-Boot] [PATCH 3/6] net: mii: Use spatch to update miiphy_register
Joe Hershberger
- [U-Boot] [PATCH 4/6] net: mii: Changes not made by spatch
Joe Hershberger
- [U-Boot] [PATCH 5/6] net: mii: Fix changes made by spatch
Joe Hershberger
- [U-Boot] [PATCH 6/6] net: mii: Clean up legacy glue that is not used
Joe Hershberger
- [U-Boot] [RFC PATCH] net: rtl8169: allow multiple devices
Joe Hershberger
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Joe Hershberger
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Joe Hershberger
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Joe Hershberger
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Joe Hershberger
- [U-Boot] [PATCH v6 5/7] net: phy: Move is_rgmii helper to phy.h
Joe Hershberger
- [U-Boot] [PATCH v6 7/7] net: phy: dp83867: Add SGMII helper for configuration
Joe Hershberger
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Joe Hershberger
- [U-Boot] [PATCH v6 3/7] net: phy: dp83867: Add device tree bindings and documentation
Joe Hershberger
- [U-Boot] [PATCH v6 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Joe Hershberger
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: fix vlan validation
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Joe Hershberger
- [U-Boot] [PATCH v2 05/12] drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
Joe Hershberger
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Joe Hershberger
- [U-Boot] [PATCH v2 02/12] ti_omap5_common: eth: do not define DM_ETH for spl
Joe Hershberger
- [U-Boot] [PATCH v2 01/12] drivers: core: device: add support to check dt compatible for a device/machine
Joe Hershberger
- [U-Boot] [PATCH v2 03/12] drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Joe Hershberger
- [U-Boot] [PATCH v2 04/12] ARM: omap5: add platform specific ethernet phy modes configurations
Joe Hershberger
- [U-Boot] [PATCH v2 08/12] arm: dts: dra7: add syscon node to cpsw to read mac address
Joe Hershberger
- [U-Boot] [PATCH v2 07/12] arm: dts: am4372: add syscon node to cpsw to read mac address
Joe Hershberger
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v2 11/12] defconfig: am437x_sk_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v2 12/12] defconfig: dra74_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v3 2/2] net: phy: Add PHY driver for mv88e61xx switches
Joe Hershberger
- [U-Boot] [PATCH] net: axi_emac: Report phy-node error message permanently
Joe Hershberger
- [U-Boot] [PATCH] net: zynq_gem: Return error incase of invalid phy address
Joe Hershberger
- [U-Boot] [PATCH 1/2] net: phy: Add SGMII support for TI phy
Joe Hershberger
- [U-Boot] [PATCH 2/2] net: zynq_gem: Add SGMII support for zynqMP
Joe Hershberger
- [U-Boot] [PATCH 2/3] net: zynq_gem: Add support for SGMII interface
Joe Hershberger
- [U-Boot] [PATCH 1/3] phy: Add phy driver support for xilinx PCS/PMA core
Joe Hershberger
- [U-Boot] [PATCH 1/2 v3] powerpc:t4240rdb: Disable the non-existent ethernet ports on T4240RDB
Joe Hershberger
- [U-Boot] [PATCH v2 09/12] arm: dts: dra7: fix ethernet name with proper device address
Joe Hershberger
- [U-Boot] [PATCH] net: Add mv88e60xx support to the mv88e61xx driver
Joe Hershberger
- [U-Boot] [PATCH v2] fdt: fix setting MAC addresses for multiple interfaces
Joe Hershberger
- [U-Boot] [PATCH 8/8] net: Probe PCI before looking for ethernet devices
Joe Hershberger
- [U-Boot] [PATCH] net: Add mv88e60xx support to the mv88e61xx driver
Joe Hershberger
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Joe Hershberger
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v2 12/12] defconfig: dra74_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v2 11/12] defconfig: am437x_sk_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Joe Hershberger
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Joe Hershberger
- [U-Boot] [PATCH] net: rtl8169: fix switching between adapters
Joe Hershberger
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Joe Hershberger
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Joe Hershberger
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Joe Hershberger
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Joe Hershberger
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Joe Hershberger
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Joe Hershberger
- [U-Boot] U-boot & AMP config
Badr El Hiouel
- [U-Boot] chainloading u-boot on an acer cb5 chromebook (nyan_big)
Thomas Hoff
- [U-Boot] [PATCH v3 1/7] armv8: fsl-layerscape: add i/d-cache enable function to enable_caches
Zhiqiang Hou
- [U-Boot] [PATCH v3 1/7] armv8: fsl-layerscape: add i/d-cache enable function to enable_caches
Zhiqiang Hou
- [U-Boot] [PATCH v3 2/7] ARMv8/layerscape: Add FSL PPA support
Zhiqiang Hou
- [U-Boot] [PATCH v3 3/7] ARMv8/ls1043ardb: Integrate FSL PPA
Zhiqiang Hou
- [U-Boot] [PATCH v3 4/7] ARMv8: add the sec_firmware header file
Zhiqiang Hou
- [U-Boot] [PATCH v3 5/7] ARMv8/PSCI: Fixup the device tree for PSCI
Zhiqiang Hou
- [U-Boot] [PATCH v3 6/7] ARMv8/Layerscape: switch SMP method to spin-table when the PSCI isn't available
Zhiqiang Hou
- [U-Boot] [PATCH v3 7/7] ARMv8/ls1043ardb: add the CONFIG_ARMV8_PSCI when PPA is enabled
Zhiqiang Hou
- [U-Boot] [PATCH] armv8/ls1043ardb: fix the limitation of using 'cpld reset'
Mingkai Hu
- [U-Boot] [Patch v2] fsl-layerscape: fdt: add IFC fixup if no IFC is avaliable in U-Boot
Mingkai Hu
- [U-Boot] [PATCH V2 6/6] gpio: exynos(s5p): remove gpio_xlate routine
Minkyu Kang
- [U-Boot] [PATCH 2/2] pinctrl: Add pinctrl driver support for Exynos7420 SoC
Minkyu Kang
- [U-Boot] [PATCH v2] exynos: Set CNTFRQ
Minkyu Kang
- [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
Minkyu Kang
- [U-Boot] [PATCH 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Minkyu Kang
- [U-Boot] [PATCH 7/9] arm: exynos: realign the code to allow support for newer 64-bit platforms
Minkyu Kang
- [U-Boot] please pull u-boot-samsung master
Minkyu Kang
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Nikita Kiryanov
- [U-Boot] [PATCH 01/12] cmd: eeprom: add bus switching support for all i2c drivers
Nikita Kiryanov
- [U-Boot] [PATCH 02/12] cmd: eeprom: add support for layout aware commands
Nikita Kiryanov
- [U-Boot] [PATCH 03/12] compulab: add support for layout aware eeprom commands
Nikita Kiryanov
- [U-Boot] [PATCH 04/12] arm: cm-fx6: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 05/12] arm: cm-t335: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 06/12] arm: cm-t54: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 07/12] arm: cm-t3517: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 08/12] arm: cm-t35: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 09/12] arm: cm-t43: add support for eeprom layout comands
Nikita Kiryanov
- [U-Boot] [PATCH 10/12] eeprom: refactor i2c bus and devaddr parsing
Nikita Kiryanov
- [U-Boot] [PATCH 11/12] eeprom: use eeprom_execute_command for all eeprom functions
Nikita Kiryanov
- [U-Boot] [PATCH 12/12] eeprom: merge cmdline parsing of eeprom commands
Nikita Kiryanov
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Nikita Kiryanov
- [U-Boot] [PATCH] splash_source: add support for ubifs formatted nand
Nikita Kiryanov
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Nikita Kiryanov
- [U-Boot] [PATCH 1/3] musb: sunxi: Do not allocate musb struct multiple times
Peter Korsgaard
- [U-Boot] A10 bring up and DRAM configuration procedure
Piotr Król
- [U-Boot] [linux-sunxi] A10 bring up and DRAM configuration procedure
Piotr Król
- [U-Boot] RFC: i.MX6 write U-Boot to NAND
Sergey Kubushyn
- [U-Boot] RFC: i.MX6 write U-Boot to NAND
Sergey Kubushyn
- [U-Boot] imx6 devices failing to build with 2016.05
Sergey Kubushyn
- [U-Boot] Problem of git clone with http
Sergey Kubushyn
- [U-Boot] [PATCH] usb: ehci-hcd: Fix crash when no ops are provided to ehci_register()
Mateusz Kulikowski
- [U-Boot] [U-Boot,v4,04/21] ehci-hcd: Add init_after_reset
Mateusz Kulikowski
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Mateusz Kulikowski
- [U-Boot] [PATCH] spmi: Fix sandbox spmi driver memory corruption
Mateusz Kulikowski
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Mateusz Kulikowski
- [U-Boot] [PATCH] dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE
Mateusz Kulikowski
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Mateusz Kulikowski
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Mateusz Kulikowski
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Mateusz Kulikowski
- [U-Boot] [PATCH v3] armv8: LS2080A: Consolidate LS2080A and LS2085A
Prabhakar Kushwaha
- [U-Boot] [PATCH v4] armv8: LS2080A: Consolidate LS2080A and LS2085A
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8: ls2080a: Update MAINTAINERS file
Prabhakar Kushwaha
- [U-Boot] [PATCH] armv8: ls2080a: update eth prime
Prabhakar Kushwaha
- [U-Boot] Devicetree specification process
Grant Likely
- [U-Boot] Devicetree specification process
Grant Likely
- [U-Boot] [PATCH 1/2] scsi: add PCIe to sata converter Marvell chip 88SE9170
Po Liu
- [U-Boot] [PATCH 2/2] ls1043ardb: add support scsi command and pcie to sata converter
Po Liu
- [U-Boot] [PATCH] mmc:fsl_esdhc: fix invalidate dcache scope
Shengzhou Liu
- [U-Boot] [PATCH] mmc:fsl_esdhc: fix invalidate dcache scope
Shengzhou Liu
- [U-Boot] [PATCH v2] armv8/ls2080ardb: Update DDR timing to support more UDIMMs
Shengzhou Liu
- [U-Boot] [PATCH v2] armv8/ls1043: Add workaround for DDR erratum A-008850
Shengzhou Liu
- [U-Boot] [PATCH 2/2] board/t4240rdb: some ethernet ports shouldn't be detected
Shengzhou Liu
- [U-Boot] [PATCH 2/2] board/t4240rdb: some ethernet ports shouldn't be detected
Shengzhou Liu
- [U-Boot] [PATCH] mmc: send CMD0 before CMD1 for some MMC cards
Yangbo Lu
- [U-Boot] [PATCH 09/10] ddr: altera: Staticize global variables
Pavel Machek
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Pavel Machek
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Pavel Machek
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH] USB: g_dnl: Change device class
Lukasz Majewski
- [U-Boot] [PATCH 1/3] tests: py: dfu: Add global variables to store dfu alt numbers for test and dummy files
Lukasz Majewski
- [U-Boot] [PATCH 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Lukasz Majewski
- [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Lukasz Majewski
- [U-Boot] [PATCH 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Lukasz Majewski
- [U-Boot] [PATCH] USB: g_dnl: Change device class
Lukasz Majewski
- [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH] usb: ums - expose selected partition/s
Lukasz Majewski
- [U-Boot] [PATCH] USB: g_dnl: Change device class
Lukasz Majewski
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH 0/8 v3] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
- [U-Boot] [PATCH 2/2] fastboot: Enable the respective speed endpoints at runtime
Lukasz Majewski
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Lukasz Majewski
- [U-Boot] [PATCH 0/8 v3] usb: Move DWC3 and some gadget options to Kconfig
Lukasz Majewski
- [U-Boot] [PATCH] usb: ums - expose selected partition/s v2
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH] usb: gadget: Disable gadget options in SPL
Lukasz Majewski
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Lukasz Majewski
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Lukasz Majewski
- [U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Lukasz Majewski
- [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Lukasz Majewski
- [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] tests: py: dfu: Add global variables to store dfu alt numbers for test and dummy files
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Lukasz Majewski
- [U-Boot] [PATCH v2 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH v2 1/3] tests: py: dfu: Add global variables to store dfu alt numbers for test and dummy files
Lukasz Majewski
- [U-Boot] [PATCH v2 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Lukasz Majewski
- [U-Boot] [PATCH v2 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Lukasz Majewski
- [U-Boot] [PATCH 3/3] usb: s3c-otg: Fix remaining bytes in debug messages
Lukasz Majewski
- [U-Boot] [PATCH v3 1/3] tests: py: dfu: Add variables to store dfu alt numbers for test and dummy files
Lukasz Majewski
- [U-Boot] [PATCH v3 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Lukasz Majewski
- [U-Boot] [PATCH v3 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Lukasz Majewski
- [U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Lukasz Majewski
- [U-Boot] [PATCH] usb: mass storage: Initialize ret variable to zero
Lukasz Majewski
- [U-Boot] [PATCH] drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH] dfu: ram: fix number base of RAM entity parameters
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [GIT] Pull request: u-boot-dfu
Lukasz Majewski
- [U-Boot] [PATCH V2 4/6] gpio: pic32: remove gpio_xlate routine
Purna Chandra Mandal
- [U-Boot] [PATCH V3 1/6] dm: gpio: add a default gpio xlate routine
Purna Chandra Mandal
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Purna Chandra Mandal
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Purna Chandra Mandal
- [U-Boot] [PATCH] MIPS: bootm: Add fixup of '/memory' node.
Purna Chandra Mandal
- [U-Boot] EHCI timed out on TD - token=0x80008d80 on U-Boot 2013.04
Manjunath
- [U-Boot] Fwd: EHCI timed out on TD - token=0x80008d80
Manjunath
- [U-Boot] EHCI timed out on TD - token=0x80008d80
Manjunath
- [U-Boot] EHCI timed out on TD - token=0x80008d80
Manjunath
- [U-Boot] [PATCH] stm32: stm32_flash: add memory barrier during flash write
Vikas Manocha
- [U-Boot] Mainline u-boot installation on Odroid-UX4
Przemyslaw Marczak
- [U-Boot] Mainline u-boot installation on Odroid-UX4
Przemyslaw Marczak
- [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
Przemyslaw Marczak
- [U-Boot] [PATCH] fdt: Do not report bad cell count when #size-cells = <0>
Przemyslaw Marczak
- [U-Boot] [PATCH] splash_source: add support for ubifs formatted nand
Eran Matityahu
- [U-Boot] [PATCH] power: pfuze100: Update definitions
Eran Matityahu
- [U-Boot] Saving u-boot.env to FAT partition of SDcard
Adrian Mcgrath
- [U-Boot] [PATCH 1/2] serial: Introduce linflex uart support
Bin Meng
- [U-Boot] [PATCH 1/2] serial: Introduce linflex uart support
Bin Meng
- [U-Boot] Using U-Boot to load RTOS
Bin Meng
- [U-Boot] Using U-Boot to load RTOS
Bin Meng
- [U-Boot] [PATCH 1/6] common: Always include errno.h in common.h
Bin Meng
- [U-Boot] [PATCH 3/6] net: mii: Use spatch to update miiphy_register
Bin Meng
- [U-Boot] [PATCH 4/6] net: mii: Changes not made by spatch
Bin Meng
- [U-Boot] [PATCH 5/6] net: mii: Fix changes made by spatch
Bin Meng
- [U-Boot] [PATCH 6/6] net: mii: Clean up legacy glue that is not used
Bin Meng
- [U-Boot] [PATCH 2/6 v3] i2c: designware_i2c: Add dw_i2c_enable() helper function
Bin Meng
- [U-Boot] [PATCH 03/44] pci: Drop CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Bin Meng
- [U-Boot] [PATCH] x86: Correct typo of Miao Yan's email address
Bin Meng
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Bin Meng
- [U-Boot] [PATCH] x86: dts: fix DTC unit name warnings
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Bin Meng
- [U-Boot] [PATCH] x86: Correct typo of Miao Yan's email address
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Bin Meng
- [U-Boot] U-Boot for Galileo Gen 1 Board
Bin Meng
- [U-Boot] U-Boot for Galileo Gen 1 Board
Bin Meng
- [U-Boot] [PATCH 2/6 v4] i2c: designware_i2c: Add dw_i2c_enable() helper function
Bin Meng
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_ptr() to return a pointer to the reg address
Bin Meng
- [U-Boot] [PATCH 6/6 v4] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Bin Meng
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] Please pull u-boot-x86
Bin Meng
- [U-Boot] [PATCH v2] pci: Device scanning range fix.
Bin Meng
- [U-Boot] [PATCH v3] pci: Device scanning range fix
Bin Meng
- [U-Boot] [PATCH v2] fdt: fix setting MAC addresses for multiple interfaces
Bin Meng
- [U-Boot] [PATCH v2] fdt: fix setting MAC addresses for multiple interfaces
Bin Meng
- [U-Boot] [PATCH 1/3] i2c: Add entry for Designware I2C driver in Kconfig
Bin Meng
- [U-Boot] [PATCH] board: ti: am57xx: Update EMIF SDRAM 1 and 3 Timings
Nishanth Menon
- [U-Boot] [PATCH] board: ti: am57xx: Add support for am572x idk in SPL
Nishanth Menon
- [U-Boot] [PATCH 0/4] ARM: OMAP5/DRA7: Update ABB Configuration for all valid domains
Nishanth Menon
- [U-Boot] [PATCH 1/4] ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2
Nishanth Menon
- [U-Boot] [PATCH 2/4] ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structure
Nishanth Menon
- [U-Boot] [PATCH 3/4] ARM: OMAP5: Enable ABB configuration for MM voltage domain
Nishanth Menon
- [U-Boot] [PATCH 4/4] ARM: DRA7: Add ABB setup for all domains
Nishanth Menon
- [U-Boot] [RFC PATCH] zynq: add support for on-board shared reset gpio
Andrea Merello
- [U-Boot] [PATCH] phy: atheros: add support for RGMII_ID, RGMII_TXID and RGMII_RXID
Andrea Merello
- [U-Boot] [PATCH 1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Soeren Moch
- [U-Boot] Fwd: U-boot xHCI endianes issues
Mohammed Mohisin
- [U-Boot] Mainline u-boot installation on Odroid-UX4
Anand Moon
- [U-Boot] [PATCH] odroid: Update README with correct firmware link and XU4 support
Anand Moon
- [U-Boot] [uboot] [PATCH 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v2 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH v2 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v2 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v2 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot][PATCH v3 2/2] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH 1/7] drivers: net: cpsw: Add readinf of DT phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH v4 3/7] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH 5/7] net: phy: Move is_rgmii helper to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 3/7] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 5/7] net: phy: Move is_rgmii helper to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 3/7] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 5/7] net: phy: Move is_rgmii helper to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Dan Murphy
- [U-Boot] [uboot] [PATCH v5 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [PATCH v6 3/7] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [PATCH v6 5/7] net: phy: Move is_rgmii helper to phy.h
Dan Murphy
- [U-Boot] [PATCH v6 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Dan Murphy
- [U-Boot] [PATCH v6 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [PATCH v7 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Dan Murphy
- [U-Boot] [PATCH v7 2/7] net: zynq_gem: Add the passing of the phy-handle node
Dan Murphy
- [U-Boot] [PATCH v7 3/7] net: phy: dp83867: Add device tree bindings and documentation
Dan Murphy
- [U-Boot] [PATCH v7 4/7] net: phy: ti: Allow the driver to be more configurable
Dan Murphy
- [U-Boot] [PATCH v7 5/7] net: phy: Move is_rgmii helper to phy.h
Dan Murphy
- [U-Boot] [PATCH v7 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Dan Murphy
- [U-Boot] [PATCH v7 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
- [U-Boot] [PATCH 0/9] device model bringup of nand on am335x gp evm and am437x gp evm
Mugunthan V N
- [U-Boot] [PATCH 1/9] include: nand: move endif to end of file
Mugunthan V N
- [U-Boot] [PATCH 2/9] cmd: nand: abstract global variable usage for dm conversion
Mugunthan V N
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Mugunthan V N
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Mugunthan V N
- [U-Boot] [PATCH 5/9] drivers: nand: omap_gpmc: convert driver to adopt driver model
Mugunthan V N
- [U-Boot] [PATCH 6/9] am43xx_evm: nand: do not define DM_NAND for spl
Mugunthan V N
- [U-Boot] [PATCH 7/9] defconfig: am437x_gp_evm: enable NAND driver model
Mugunthan V N
- [U-Boot] [PATCH 8/9] am335x_evm: nand: do not define DM_NAND for spl
Mugunthan V N
- [U-Boot] [PATCH 9/9] defconfig: am335x_gp_evm: enable NAND driver model
Mugunthan V N
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Mugunthan V N
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Mugunthan V N
- [U-Boot] [PATCH] drivers: mmc: omap_hsmmc: Fix conversion of address to a pointer
Mugunthan V N
- [U-Boot] [PATCH 0/5] omap_hsmmc: add cd/wp gpio request, mmc dt fixes and enable mmc dm for dra74/dra72 evms
Mugunthan V N
- [U-Boot] [PATCH 1/5] drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Mugunthan V N
- [U-Boot] [PATCH 2/5] ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
Mugunthan V N
- [U-Boot] [PATCH 3/5] ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
Mugunthan V N
- [U-Boot] [PATCH 4/5] configs: dra72_evm: enable mmc driver model
Mugunthan V N
- [U-Boot] [PATCH 5/5] configs: dra74_evm: enable mmc driver model
Mugunthan V N
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Mugunthan V N
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Mugunthan V N
- [U-Boot] [PATCH 5/9] drivers: nand: omap_gpmc: convert driver to adopt driver model
Mugunthan V N
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Mugunthan V N
- [U-Boot] [PATCH 00/11] cpsw: enable DM_ETH on dra74 and am437x evms
Mugunthan V N
- [U-Boot] [PATCH 01/11] drivers: core: device: add support to check dt compatible for a device/machine
Mugunthan V N
- [U-Boot] [PATCH 02/11] lib: fdtdec: fix size cell and address cell parse from DT
Mugunthan V N
- [U-Boot] [PATCH 03/11] ti_omap5_common: eth: do not define DM_ETH for spl
Mugunthan V N
- [U-Boot] [PATCH 04/11] drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Mugunthan V N
- [U-Boot] [PATCH 05/11] ARM: omap5: add platform specific ethernet phy modes configurations
Mugunthan V N
- [U-Boot] [PATCH 06/11] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH 07/11] arm: dts: am4372: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH 08/11] arm: dts: dra7: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH 09/11] defconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH 10/11] defconfig: am437x_sk_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH 11/11] defconfig: dra74_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [uboot] [PATCH 1/7] drivers: net: cpsw: Add readinf of DT phy-handle node
Mugunthan V N
- [U-Boot] [uboot] [PATCH 2/7] net: zynq_gem: Add the passing of the phy-handle node
Mugunthan V N
- [U-Boot] [uboot] [PATCH v4 3/7] net: phy: dp83867: Add device tree bindings and documentation
Mugunthan V N
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Mugunthan V N
- [U-Boot] [uboot] [PATCH 5/7] net: phy: Move is_rgmii helper to phy.h
Mugunthan V N
- [U-Boot] [uboot] [PATCH 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Mugunthan V N
- [U-Boot] [uboot] [PATCH 7/7] net: phy: dp83867: Add SGMII helper for configuration
Mugunthan V N
- [U-Boot] [PATCH v2 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Mugunthan V N
- [U-Boot] [PATCH v2 2/2] spl: Support loading a FIT from FAT FS
Mugunthan V N
- [U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
Mugunthan V N
- [U-Boot] [PATCH 02/11] lib: fdtdec: fix size cell and address cell parse from DT
Mugunthan V N
- [U-Boot] [PATCH 03/11] ti_omap5_common: eth: do not define DM_ETH for spl
Mugunthan V N
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Mugunthan V N
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Mugunthan V N
- [U-Boot] [PATCH 06/11] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH v2 00/12] cpsw: enable DM_ETH on dra74 and am437x evms
Mugunthan V N
- [U-Boot] [PATCH v2 01/12] drivers: core: device: add support to check dt compatible for a device/machine
Mugunthan V N
- [U-Boot] [PATCH v2 02/12] ti_omap5_common: eth: do not define DM_ETH for spl
Mugunthan V N
- [U-Boot] [PATCH v2 03/12] drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Mugunthan V N
- [U-Boot] [PATCH v2 04/12] ARM: omap5: add platform specific ethernet phy modes configurations
Mugunthan V N
- [U-Boot] [PATCH v2 05/12] drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
Mugunthan V N
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH v2 07/12] arm: dts: am4372: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH v2 08/12] arm: dts: dra7: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH v2 09/12] arm: dts: dra7: fix ethernet name with proper device address
Mugunthan V N
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v2 11/12] defconfig: am437x_sk_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v2 12/12] defconfig: dra74_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH 1/1] drivers: usb: common: add common code for usb drivers to use
Mugunthan V N
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Mugunthan V N
- [U-Boot] [PATCH v2 09/12] arm: dts: dra7: fix ethernet name with proper device address
Mugunthan V N
- [U-Boot] [PATCH 2/9] cmd: nand: abstract global variable usage for dm conversion
Mugunthan V N
- [U-Boot] [PATCH 2/9] cmd: nand: abstract global variable usage for dm conversion
Mugunthan V N
- [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Mugunthan V N
- [U-Boot] [uboot] [PATCH v5 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Mugunthan V N
- [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable
Mugunthan V N
- [U-Boot] [PATCH 01/10] drivers: usb: dwc3: remove devm_zalloc from linux_compact
Mugunthan V N
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Mugunthan V N
- [U-Boot] [PATCH v6 1/7] drivers: net: cpsw: Add reading of DT phy-handle node
Mugunthan V N
- [U-Boot] [PATCH v6 3/7] net: phy: dp83867: Add device tree bindings and documentation
Mugunthan V N
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Mugunthan V N
- [U-Boot] [PATCH v6 5/7] net: phy: Move is_rgmii helper to phy.h
Mugunthan V N
- [U-Boot] [PATCH v6 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Mugunthan V N
- [U-Boot] [PATCH v6 7/7] net: phy: dp83867: Add SGMII helper for configuration
Mugunthan V N
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Mugunthan V N
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Mugunthan V N
- [U-Boot] [PATCH] drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env
Mugunthan V N
- [U-Boot] [PATCH] dfu: ram: fix number base of RAM entity parameters
Mugunthan V N
- [U-Boot] [PATCH] dfu: ram: fix number base of RAM entity parameters
Mugunthan V N
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v2 10/12] defconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v3 00/12] cpsw: enable DM_ETH on dra74 and am437x evms
Mugunthan V N
- [U-Boot] [PATCH v3 01/12] drivers: core: device: add support to check dt compatible for a device/machine
Mugunthan V N
- [U-Boot] [PATCH v3 02/12] ti_omap5_common: eth: do not define DM_ETH for spl
Mugunthan V N
- [U-Boot] [PATCH v3 03/12] drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Mugunthan V N
- [U-Boot] [PATCH v3 04/12] ARM: omap5: add platform specific ethernet phy modes configurations
Mugunthan V N
- [U-Boot] [PATCH v3 05/12] drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
Mugunthan V N
- [U-Boot] [PATCH v3 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH v3 07/12] arm: dts: am4372: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH v3 08/12] arm: dts: dra7: add syscon node to cpsw to read mac address
Mugunthan V N
- [U-Boot] [PATCH v3 09/12] arm: dts: dra7: fix ethernet name with proper device address
Mugunthan V N
- [U-Boot] [PATCH v3 10/12] defconfig: am437x_gp_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v3 11/12] defconfig: am437x_sk_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v3 12/12] defconfig: dra74_evm: enable eth driver model
Mugunthan V N
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Mugunthan V N
- [U-Boot] [PATCH 0/7] Handle GPIO_ACTIVE_LOW in gpio-uclass
Eric Nelson
- [U-Boot] [PATCH 1/7] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH 2/7] gpio: intel_broadwell: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH 3/7] gpio: omap: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH 4/7] gpio: pic32: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH 5/7] gpio: rk: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH 6/7] gpio: exynos(s5p): remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
Eric Nelson
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Eric Nelson
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Eric Nelson
- [U-Boot] [U-Boot, V3, 1/3] drivers: block: add block device cache
Eric Nelson
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Eric Nelson
- [U-Boot] [PATCH 0/3] minor blkcache updates
Eric Nelson
- [U-Boot] [PATCH 1/3] cmd: blkcache: remove indentation from output of 'show'
Eric Nelson
- [U-Boot] [PATCH 2/3] cmd: blkcache: simplify sub-command handling
Eric Nelson
- [U-Boot] [PATCH 3/3] drivers: block: fix placement of parameters
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [RFC PATCH 2/2] mmc: add support for block device cache
Eric Nelson
- [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH 2/2] dm: gpio: mxc: implement xlate function
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH V2 0/6] Handle GPIO_ACTIVE_LOW in gpio-uclass
Eric Nelson
- [U-Boot] [PATCH V2 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [PATCH V2 2/6] gpio: intel_broadwell: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH V2 3/6] gpio: omap: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH V2 4/6] gpio: pic32: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH V2 5/6] gpio: rk: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH V2 6/6] gpio: exynos(s5p): remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [PATCH V2 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [PATCH V3 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Eric Nelson
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Eric Nelson
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Eric Nelson
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Eric Nelson
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Eric Nelson
- [U-Boot] [RESEND PATCH 0/6] Handle GPIO_ACTIVE_LOW in gpio-uclass
Eric Nelson
- [U-Boot] [RESEND PATCH V3 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [RESEND PATCH V2 2/6] gpio: intel_broadwell: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [RESEND PATCH V2 3/6] gpio: omap: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [RESEND PATCH V2 4/6] gpio: pic32: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [RESEND PATCH V2 5/6] gpio: rk: remove gpio_xlate routine
Eric Nelson
- [U-Boot] [RESEND PATCH V2 6/6] gpio: exynos(s5p): remove gpio_xlate routine
Eric Nelson
- [U-Boot] [PATCH] imx: mx6: mx6sl_pins: add GPIO variant for SD1_DAT5
Eric Nelson
- [U-Boot] [RESEND PATCH V3 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [PATCH V4, 1/6] dm: gpio: add a default gpio xlate routine
Eric Nelson
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Robert Nelson
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Robert Nelson
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Robert Nelson
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Dinh Nguyen
- [U-Boot] SoCFPGA cache / S-bit problem - was Re: Newbie SPL question for socfpga_sockit
Dinh Nguyen
- [U-Boot] SoCFPGA cache / S-bit problem - was Re: Newbie SPL question for socfpga_sockit
Dinh Nguyen
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Dinh Nguyen
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Dinh Nguyen
- [U-Boot] Newbie SPL question for socfpga_sockit
Dinh Nguyen
- [U-Boot] Newbie SPL question for socfpga_sockit
Dinh Nguyen
- [U-Boot] SYS_VENDOR for sr1500 board?
Dinh Nguyen
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Dinh Nguyen
- [U-Boot] [PATCH] arm: socfpga: clean up common config options
Dinh Nguyen
- [U-Boot] [PATCH 1/2] cmd: Kconfig: Add a Kconfig options for a few CMD
Dinh Nguyen
- [U-Boot] [PATCHv2 2/2] arm: socfpga: clean up common config options
Dinh Nguyen
- [U-Boot] [PATCHv2 2/2] arm: socfpga: clean up common config options
Dinh Nguyen
- [U-Boot] [PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Dinh Nguyen
- [U-Boot] [PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Dinh Nguyen
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Dinh Nguyen
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Dinh Nguyen
- [U-Boot] Fwd: Marvell Armada XP u-boot from uart
PA Nilsson
- [U-Boot] [RFC] setenv() and variable flags, especially "read-only"
Bernhard Nortmann
- [U-Boot] [U-Boot,v4,04/21] ehci-hcd: Add init_after_reset
Bernhard Nortmann
- [U-Boot] [PATCH] usb: ehci-hcd: Fix crash when no ops are provided to ehci_register()
Bernhard Nortmann
- [U-Boot] [PATCH][PATCH] sunxi: Properly announce BOOT_DEVICE_BOARD as "FEL"
Bernhard Nortmann
- [U-Boot] ARMv7 / RK3288 Hypervisor Support
Timothy Pearson
- [U-Boot] Ethernet on FDI3250 board
Jonatan Personal
- [U-Boot] Missing flush_cache in do_load function
Borsodi Petr
- [U-Boot] [PATCH 1/2] serial: Introduce linflex uart support
Eddy Petrișor
- [U-Boot] [PATCH 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Eddy Petrișor
- [U-Boot] [PATCH 1/2] serial: Introduce linflex uart support
Eddy Petrișor
- [U-Boot] [PATCH 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Eddy Petrișor
- [U-Boot] [PATCH 0/2] Initial support for S32V234 - version 2
Eddy Petrișor
- [U-Boot] [PATCH 1/2] serial: Introduce linflex uart support
Eddy Petrișor
- [U-Boot] [PATCH 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Eddy Petrișor
- [U-Boot] [PATCH v2 0/2] Initial S32V234 support - version 2 (with notes now)
Eddy Petrișor
- [U-Boot] [PATCH v2 1/2] serial: Introduce linflex uart support
Eddy Petrișor
- [U-Boot] [PATCH v2 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Eddy Petrișor
- [U-Boot] [PATCH] drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definition
Martin Pietryka
- [U-Boot] [PATCH 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Martin Pietryka
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Martin Pietryka
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Martin Pietryka
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Martin Pietryka
- [U-Boot] [PATCH v2 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Martin Pietryka
- [U-Boot] [PATCH v3 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Martin Pietryka
- [U-Boot] [PATCH v3 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Martin Pietryka
- [U-Boot] [PATCH v2 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Martin Pietryka
- [U-Boot] imx6 nand support in u-boot
Maxim Podbereznyy
- [U-Boot] [PATCH] armv8/fdt: add fixup_crypto_node
Alex Porosanu
- [U-Boot] [PATCH 0/3] Multiple FSL Security Engine RNG instantation
Alex Porosanu
- [U-Boot] [PATCH 1/3] arch/arm: add SEC JR0 offset
Alex Porosanu
- [U-Boot] [PATCH 2/3] arch/arm, arch/powerpc: add # of SEC engines on the SOC
Alex Porosanu
- [U-Boot] [PATCH 3/3] crypto/fsl: add support for multiple SEC engines initialization
Alex Porosanu
- [U-Boot] [RFC] Disable USB options for SPL build
Sam Protsenko
- [U-Boot] [RFC] Disable USB options for SPL build
Sam Protsenko
- [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"
Sam Protsenko
- [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"
Sam Protsenko
- [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"
Sam Protsenko
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Sam Protsenko
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Sam Protsenko
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Sam Protsenko
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Sam Protsenko
- [U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Sam Protsenko
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Sam Protsenko
- [U-Boot] [PATCH 0/8 v3] usb: Move DWC3 and some gadget options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 0/8 v4] usb: Move DWC3 and some gadget options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 1/8 v4] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 2/8 v4] usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 3/8 v4] usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 4/8 v4] usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 5/8 v4] usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 6/8 v4] usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 7/8 v4] usb: gadget Move: CONFIG_G_DNL_* to Kconfig
Sam Protsenko
- [U-Boot] [PATCH 0/8 v4] usb: Move DWC3 and some gadget options to Kconfig
Sam Protsenko
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Sam Protsenko
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: Disable gadget options in SPL
Sam Protsenko
- [U-Boot] [PATCH] ARM: zynq: Fix microzed build
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: Disable gadget options in SPL
Sam Protsenko
- [U-Boot] [PATCH] usb: gadget: Disable gadget options in SPL
Sam Protsenko
- [U-Boot] [PATCH] ti_armv7_common.h: Fix U-Boot location on eMMC
Sam Protsenko
- [U-Boot] [PATCH v2] ti_armv7_common.h: Fix U-Boot location on eMMC
Sam Protsenko
- [U-Boot] [PATCH v3] ti_armv7_common.h: Fix U-Boot location on eMMC
Sam Protsenko
- [U-Boot] [PATCH] arm: dra7xx: Extend bootloader partition
Sam Protsenko
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Semen Protsenko
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 2/8] usb: gadget: Add CONFIG_USB_GADGET_DUALSPEED to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 3/8] usb: dwc3: Move CONFIG_USB_DWC3 to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 4/8] usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 5/8] usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 6/8] usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 7/8] usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 8/8] usb: gadget Move: CONFIG_G_DNL_* to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 0/8 v3] usb: Move DWC3 and some gadget options to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 1/7 v3] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 2/7 v3] usb: gadget: Move CONFIG_USB_GADGET_DUALSPEED to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 3/7 v3] usb: gadget: Move CONFIG_USB_GADGET_DOWNLOAD to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 4/7 v3] usb: dwc3: Move CONFIG_USB_DWC3_GADGET/HOST to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 5/7 v3] usb: dwc3: Move CONFIG_USB_DWC3_OMAP to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 6/7 v3] usb: dwc3: Move CONFIG_USB_DWC3_PHY_* to Kconfig
Semen Protsenko
- [U-Boot] [PATCH 7/7 v3] usb: gadget Move: CONFIG_G_DNL_* to Kconfig
Semen Protsenko
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Semen Protsenko
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
Andre Przywara
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Andre Przywara
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Andre Przywara
- [U-Boot] [PATCH 7/6] sunxi: Reserve ATF memory space on A64
André Przywara
- [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"
Zhao Qiang
- [U-Boot] [PATCH 1/2] armv8: ls1043a: load Fman ucode from NAND flash under NAND boot
Gong Qianyu
- [U-Boot] [PATCH 2/2] armv8: ls1043a: load Fman ucode from SD/MMC under SD boot
Gong Qianyu
- [U-Boot] [PATCH] armv8/ls1043ardb: fix the limitation of using 'cpld reset'
Gong Qianyu
- [U-Boot] [PATCH] armv8: ls1043a: copy kernel from QSPI when booting with QSPI enabled
Gong Qianyu
- [U-Boot] [PATCH 1/2] armv8: ls1043a: remove redundant code in board files
Gong Qianyu
- [U-Boot] [PATCH 2/2] armv8: ls1043ardb: fix types of variables
Gong Qianyu
- [U-Boot] [PATCH 1/3] fsl-layerscape: spl: remove duplicate init_early_memctl_regs()
Gong Qianyu
- [U-Boot] [PATCH 3/3] ls102xa: spl: fix the macro name of MMC mode
Gong Qianyu
- [U-Boot] [PATCH 2/3] fsl-layerscape: spl: fix the macro name of MMC mode
Gong Qianyu
- [U-Boot] [Patch v2] fsl-layerscape: fdt: add IFC fixup if no IFC is avaliable in U-Boot
Gong Qianyu
- [U-Boot] [PATCH] board: ti: am57xx: Prevent init_sata() from being called twice
Roger Quadros
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Roger Quadros
- [U-Boot] [PATCH 0/2] uboot: fastboot: fix high speed endpoint descriptors
Roger Quadros
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Roger Quadros
- [U-Boot] [PATCH 2/2] fastboot: Enable the respective speed endpoints at runtime
Roger Quadros
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Roger Quadros
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Roger Quadros
- [U-Boot] [PATCH v2 2/2] fastboot: Enable the respective speed endpoints at runtime
Roger Quadros
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Roger Quadros
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Roger Quadros
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Roger Quadros
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Roger Quadros
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Roger Quadros
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Roger Quadros
- [U-Boot] [PATCH 0/3] s3c-otg: fastboot: fixes and cleanup
Roger Quadros
- [U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Roger Quadros
- [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Roger Quadros
- [U-Boot] [PATCH 3/3] usb: s3c-otg: Fix remaining bytes in debug messages
Roger Quadros
- [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Roger Quadros
- [U-Boot] [PATCH 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Roger Quadros
- [U-Boot] [PATCH v2 2/3] usb: s3c-otg: Fix short packet for request size > ep.maxpacket
Roger Quadros
- [U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
Vignesh R
- [U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
Vignesh R
- [U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
Vignesh R
- [U-Boot] [PATCH 00/11] ARM: Keystone2: Convert davinci_spi to DM
Vignesh R
- [U-Boot] [PATCH 01/11] spi: davinci_spi: Convert to driver to adapt to DM
Vignesh R
- [U-Boot] [PATCH 02/11] keystone2: spi: do not define DM_SPI and DM_SPI_FLASH for SPL build
Vignesh R
- [U-Boot] [PATCH 03/11] ARM: dts: keystone2: add SPI aliases for davinci SPI nodes
Vignesh R
- [U-Boot] [PATCH 04/11] ARM: dts: k2hk: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH 05/11] defconfig: k2hk_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH 06/11] ARM: dts: k2e: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH 07/11] defconfig: k2e_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH 08/11] ARM: dts: k2l: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH 09/11] defconfig: k2l_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH 10/11] ARM: dts: k2g: add support for Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH 11/11] defconfig: k2g_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT
Vignesh R
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Vignesh R
- [U-Boot] [PATCH v2] dm: spi: Read default speed values from DT
Vignesh R
- [U-Boot] [PATCH 0/4] Add support for Cadence QSPI on K2G
Vignesh R
- [U-Boot] [PATCH 1/4] spi: cadence_qspi_apb: Support 32 bit AHB address
Vignesh R
- [U-Boot] [PATCH 2/4] spi: cadence_quadspi: Enable QUAD mode based on DT data
Vignesh R
- [U-Boot] [PATCH 3/4] ARM: dts: K2G: Add support for QSPI controller
Vignesh R
- [U-Boot] [PATCH 4/4] defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller
Vignesh R
- [U-Boot] [PATCH 03/11] ARM: dts: keystone2: add SPI aliases for davinci SPI nodes
Vignesh R
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Vignesh R
- [U-Boot] [PATCH v3] dm: spi: Read default speed and mode values from DT
Vignesh R
- [U-Boot] [PATCH 01/11] spi: davinci_spi: Convert to driver to adapt to DM
Vignesh R
- [U-Boot] [PATCH v2 00/12] ARM: Keystone2: Convert davinci_spi to DM
Vignesh R
- [U-Boot] [PATCH v2 01/12] dm: core: implement dev_map_phsymem()
Vignesh R
- [U-Boot] [PATCH v2 02/12] spi: davinci_spi: Convert to driver to adapt to DM
Vignesh R
- [U-Boot] [PATCH v2 03/12] keystone2: spi: do not define DM_SPI and DM_SPI_FLASH for SPL build
Vignesh R
- [U-Boot] [PATCH v2 04/12] ARM: dts: keystone2: add SPI aliases for davinci SPI nodes
Vignesh R
- [U-Boot] [PATCH v2 05/12] ARM: dts: k2hk: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH v2 06/12] defconfig: k2hk_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH v2 07/12] ARM: dts: k2e: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH v2 08/12] defconfig: k2e_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH v2 09/12] ARM: dts: k2l: Enable Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH v2 10/12] defconfig: k2l_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH v2 11/12] ARM: dts: k2g: add support for Davinci SPI controller
Vignesh R
- [U-Boot] [PATCH v2 12/12] defconfig: k2g_evm_defconfig: enable SPI driver model
Vignesh R
- [U-Boot] [PATCH 1/2] mtd: cqspi: Simplify indirect write code
Vignesh R
- [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"
Steve Rae
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Steve Rae
- [U-Boot] [PATCH 2/3] bcm281xx: enable CONFIG_OF_LIBFDT
Steve Rae
- [U-Boot] [PATCH 3/3] bcm281xx: save ENV to MMC
Steve Rae
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Steve Rae
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Steve Rae
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Steve Rae
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Steve Rae
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Steve Rae
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Steve Rae
- [U-Boot] [PATCH 2/2] fastboot: Enable the respective speed endpoints at runtime
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Steve Rae
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Steve Rae
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Steve Rae
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Steve Rae
- [U-Boot] [RFC] fastboot: sparse image handling and sessionId
Steve Rae
- [U-Boot] couple questions about tail end of common/Makefile
Steve Rae
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Steve Rae
- [U-Boot] [PATCH 3/3] usb: s3c-otg: Fix remaining bytes in debug messages
Steve Rae
- [U-Boot] [PATCH 1/3] fastboot: Clean up bulk-out logic
Steve Rae
- [U-Boot] [PATCH 3/3] usb: s3c-otg: Fix remaining bytes in debug messages
Steve Rae
- [U-Boot] [PATCH] ARM: tegra: enable GPU node by compatible value
Thierry Reding
- [U-Boot] [PATCH 2/2] video: tegra: refuse to bind to disabled dcs
Thierry Reding
- [U-Boot] [PATCH] pci: tegra: fix DM conversion issues on Tegra20
Thierry Reding
- [U-Boot] [verified-boot] Compile 'key store' DTB without mkimage and private key
Teddy Reed
- [U-Boot] [verified-boot] Multiple levels of signing keys
Teddy Reed
- [U-Boot] [verified-boot] Compile 'key store' DTB without mkimage and private key
Teddy Reed
- [U-Boot] Newbie SPL question for socfpga_sockit
Phil Reid
- [U-Boot] Newbie SPL question for socfpga_sockit
Phil Reid
- [U-Boot] Newbie SPL question for socfpga_sockit
Phil Reid
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Phil Reid
- [U-Boot] [PATCH] ts4800: update environment to boot with device tree
Damien Riegel
- [U-Boot] [PATCH v2] ts4800: update environment to boot with device tree
Damien Riegel
- [U-Boot] [PATCH V2] common: env: support sata device
Tom Rini
- [U-Boot] [PATCH 1/9] include: nand: move endif to end of file
Tom Rini
- [U-Boot] [PATCH 2/9] cmd: nand: abstract global variable usage for dm conversion
Tom Rini
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Tom Rini
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Tom Rini
- [U-Boot] [PATCH 5/9] drivers: nand: omap_gpmc: convert driver to adopt driver model
Tom Rini
- [U-Boot] [PATCH 6/9] am43xx_evm: nand: do not define DM_NAND for spl
Tom Rini
- [U-Boot] [PATCH 7/9] defconfig: am437x_gp_evm: enable NAND driver model
Tom Rini
- [U-Boot] [PATCH 8/9] am335x_evm: nand: do not define DM_NAND for spl
Tom Rini
- [U-Boot] [ANN] Minor patchwork cleaning
Tom Rini
- [U-Boot] [PATCH] buildman: allow more incremental building
Tom Rini
- [U-Boot] pull request: u-boot-uniphier/master
Tom Rini
- [U-Boot] Please pull u-boot-sunxi master
Tom Rini
- [U-Boot] [PATCH] block: Add support for Ceva sata
Tom Rini
- [U-Boot] [PATCH] image-fit: Change FIT prefix for configurations
Tom Rini
- [U-Boot] [PATCH 0/2] i.MX6 LPDDR2 fixes
Tom Rini
- [U-Boot] [PATCH 1/2] mx6qarm2: imximage_mx6dl.cfg update to fix tINIT3 violation
Tom Rini
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Tom Rini
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Tom Rini
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Tom Rini
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Tom Rini
- [U-Boot] [PATCH] MAINTAINERS: Update Scott Wood's email address
Tom Rini
- [U-Boot] arm: clang: Update support slightly
Tom Rini
- [U-Boot] fastboot: allow retrieving fastboot variables from env
Tom Rini
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Tom Rini
- [U-Boot] smsc95xx: fix operation on 64-bit systems
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: keystone2: Refactor MSMC macros to avoid #ifdeffery
Tom Rini
- [U-Boot] [U-Boot, 2/2] ARM: keystone2: Add missing privilege ID settings
Tom Rini
- [U-Boot] README: Specify the full path for README.displaying-bmps
Tom Rini
- [U-Boot] doc: fix file extension for flattened image tree blob
Tom Rini
- [U-Boot] doc: clarify openssl-based key and certificate generation process
Tom Rini
- [U-Boot] [U-Boot, V2, 1/5] ARM: bcm2835: move CONFIG_BCM283* to Kconfig
Tom Rini
- [U-Boot] [U-Boot, V2, 2/5] rpi: use constant "unknown board" DT filename
Tom Rini
- [U-Boot] [U-Boot,V2,3/5] rpi: add Raspberry Pi 3 board ID
Tom Rini
- [U-Boot] [U-Boot, V2, 4/5] ARM: bcm2835: expand Kconfig target descriptions
Tom Rini
- [U-Boot] [U-Boot, V2, 5/5] rpi: BCM2837 and Raspberry Pi 3 32-bit support
Tom Rini
- [U-Boot] Common: SPL: spl_nand: Fixed debug correct NAND ECC type.
Tom Rini
- [U-Boot] post: Remove reference to deleted "lwmon" board from Makefile
Tom Rini
- [U-Boot] post: Delete unnecessary bitmask of POST_MANUAL from POST_ALWAYS
Tom Rini
- [U-Boot] lib/physmem.c: Switch to __weak for arch_phys_memset
Tom Rini
- [U-Boot] jffs2: Fix set but not used warning
Tom Rini
- [U-Boot] [U-Boot,2/3] mmc: use block layer in mmc command
Tom Rini
- [U-Boot] [U-Boot,3/3] sata: use block layer for sata command
Tom Rini
- [U-Boot] common: env_sf: Add exclamation mark
Tom Rini
- [U-Boot] [U-Boot, V3, 1/3] drivers: block: add block device cache
Tom Rini
- [U-Boot] arm: spl: Align default board_init_f comment with code
Tom Rini
- [U-Boot] configs: ti_armv7_keystone2: make SYS_TEXT_BASE configurable at build time
Tom Rini
- [U-Boot] arm64: booti: add missing unmap_sysmem()
Tom Rini
- [U-Boot] [U-Boot, v2, 1/7] sniper: Include explicit serial baudrate on bootargs
Tom Rini
- [U-Boot] [U-Boot, v2, 2/7] kc1: Include explicit serial baudrate on bootargs
Tom Rini
- [U-Boot] [U-Boot, v2, 3/7] kc1: Select libfdt to allow running devicetree-based kernels
Tom Rini
- [U-Boot] [U-Boot, v2, 4/7] kc1: Add some sysboot and devicetree-related environment variables
Tom Rini
- [U-Boot] [U-Boot, v2, 5/7] sniper: Proper reboot mode and boot reason validation
Tom Rini
- [U-Boot] [U-Boot, v2, 6/7] kc1: Proper reboot mode and boot reason validation
Tom Rini
- [U-Boot] [U-Boot, v2, 7/7] sniper: Change vendor name from lge to lg, matching devicetree vendor prefix
Tom Rini
- [U-Boot] efi_loader: Always allocate the highest available address
Tom Rini
- [U-Boot] board: ti: DRA7: Add DP83867 TI phy for rev c
Tom Rini
- [U-Boot] [U-Boot, v4, 01/21] serial: Add support for Qualcomm serial port
Tom Rini
- [U-Boot] [U-Boot, v4, 02/21] gpio: Add support for Qualcomm gpio controller
Tom Rini
- [U-Boot] [U-Boot, v4, 03/21] mmc: Add support for Qualcomm SDHCI controller
Tom Rini
- [U-Boot] [U-Boot,v4,04/21] ehci-hcd: Add init_after_reset
Tom Rini
- [U-Boot] [U-Boot, v4, 05/21] usb: ulpi: Add Kconfig options for ULPI
Tom Rini
- [U-Boot] [U-Boot,v4,06/21] Migrate CONFIG_ULPI* to Kconfig
Tom Rini
- [U-Boot] [U-Boot,v4,07/21] usb: ulpi: Fix viewport_addr type
Tom Rini
- [U-Boot] [U-Boot, v4, 08/21] usb: ulpi: Fix compile warning in read/write on 64-bit machines.
Tom Rini
- [U-Boot] [U-Boot, v4, 09/21] eth: asix88179: Print packet length properly
Tom Rini
- [U-Boot] [U-Boot,v4,10/21] usb: Rename ehci-fsl.h to ehci-ci.h
Tom Rini
- [U-Boot] [U-Boot, v4, 11/21] usb: ehci-ci: Add missing registers.
Tom Rini
- [U-Boot] [U-Boot, v4, 12/21] ehci-ci.h: drop generic USBCMD fields
Tom Rini
- [U-Boot] [U-Boot,v4,13/21] ehci: Add support for Qualcomm EHCI
Tom Rini
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Tom Rini
- [U-Boot] [U-Boot,v4,14/21] drivers: Add SPMI bus uclass
Tom Rini
- [U-Boot] [U-Boot, v4, 16/21] drivers: spmi: Add support for Qualcomm SPMI bus driver
Tom Rini
- [U-Boot] [U-Boot, v4, 17/21] pmic: Add support for Qualcomm PM8916 PMIC
Tom Rini
- [U-Boot] [U-Boot, v4, 18/21] gpio: Add support for Qualcomm PM8916 gpios
Tom Rini
- [U-Boot] [U-Boot, v4, 19/21] arm: Add support for Qualcomm Snapdragon family
Tom Rini
- [U-Boot] [U-Boot, v4, 20/21] board: Add Qualcomm Dragonboard 410C support
Tom Rini
- [U-Boot] [U-Boot, v4, 21/21] Add myself as Snapdragon and SPMI maintainer
Tom Rini
- [U-Boot] post: Remove references to scrapped "netta" board.
Tom Rini
- [U-Boot] [RFC] Disable USB options for SPL build
Tom Rini
- [U-Boot] [PATCH 1/2] ARM: allow CONFIG_GICV* not to be defined
Tom Rini
- [U-Boot] [PATCH 2/2] ARM: add Raspberry Pi 3 64-bit config
Tom Rini
- [U-Boot] [PATCH] ARM: rpi: add some missing Kconfig help text
Tom Rini
- [U-Boot] Please pull u-boot-sunxi master
Tom Rini
- [U-Boot] net: phy: Realtek RTL8211B/C PHY ID fix
Tom Rini
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Tom Rini
- [U-Boot] [PATCH] rpi: remove redundant board files
Tom Rini
- [U-Boot] [PATCH v2 1/9] arm: add initial support for Amlogic Meson and ODROID-C2
Tom Rini
- [U-Boot] [PATCH v2 2/9] arm: dts: import Meson files
Tom Rini
- [U-Boot] [PATCH v2 3/9] serial: add support for Amlogic Meson UART
Tom Rini
- [U-Boot] [PATCH v2 4/9] arm: meson: use device tree
Tom Rini
- [U-Boot] [PATCH v2 6/9] net: designware: fix descriptor layout and warnings on 64-bit archs
Tom Rini
- [U-Boot] [PATCH v2 7/9] net: designware: add generic device tree compatible id
Tom Rini
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Tom Rini
- [U-Boot] [PATCH v2 9/9] board: odroid-c2: add Ethernet support
Tom Rini
- [U-Boot] [PATCH v2 5/9] board: odroid-c2: enable serial
Tom Rini
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Tom Rini
- [U-Boot] [PATCH v2 8/9] arm: dts: add ethernet node to Meson gxbb
Tom Rini
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Tom Rini
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] [PATCH 1/5] drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Tom Rini
- [U-Boot] [PATCH] common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [GIT PULL] Xilinx changes
Tom Rini
- [U-Boot] [PATCH 2/5] ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
Tom Rini
- [U-Boot] [PATCH 3/5] ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
Tom Rini
- [U-Boot] [PATCH 4/5] configs: dra72_evm: enable mmc driver model
Tom Rini
- [U-Boot] [PATCH 5/5] configs: dra74_evm: enable mmc driver model
Tom Rini
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Tom Rini
- [U-Boot] [PATCH] test/py: pass -v option when executing sandbox
Tom Rini
- [U-Boot] [PATCH 2/2] mx6slevk: imximage.cfg: update to fix tINIT3 and tIH-CA violations
Tom Rini
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] [PATCH] disk: part: Enable get_info pointer for CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] [uboot] [PATCH 1/2] net: phy: dp83867: Add device tree bindings and documentation
Tom Rini
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] [PATCH] keystone2: move platform specific NAND configs to platform specific header
Tom Rini
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Tom Rini
- [U-Boot] Please pull u-boot-fsl-qoriq master
Tom Rini
- [U-Boot] [PATCH 1/2] spl: Make sure destination address is dma aligned when loading fit
Tom Rini
- [U-Boot] [PATCH 2/2] spl: Support loading a FIT from SPI
Tom Rini
- [U-Boot] [PATCH 00/10] driver model bring-up of dwc3 usb peripheral
Tom Rini
- [U-Boot] [PATCH] am57x: Move CONS_INDEX to Kconfig
Tom Rini
- [U-Boot] [PATCH V3] common: env: support sata device
Tom Rini
- [U-Boot] [PATCH] drivers: mmc: omap_hsmmc: Fix conversion of address to a pointer
Tom Rini
- [U-Boot] [RFC PATCH 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Tom Rini
- [U-Boot] [RFC PATCH 2/2] spl: Support loading a FIT from FAT FS
Tom Rini
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Tom Rini
- [U-Boot] [PATCH] test/py: README: link to example hook scripts
Tom Rini
- [U-Boot] [PATCH] dm: spi: Read default speed, mode values from DT
Tom Rini
- [U-Boot] [PATCH 6/7] kc1: Proper reboot mode and boot reason validation
Tom Rini
- [U-Boot] [PATCH] serial: add BCM283x mini UART driver
Tom Rini
- [U-Boot] Please pull u-boot-mpc85xx master
Tom Rini
- [U-Boot] [PATCH] board: ti: am57xx: Update EMIF SDRAM 1 and 3 Timings
Tom Rini
- [U-Boot] [PATCH] board: ti: am57xx: Add support for am572x idk in SPL
Tom Rini
- [U-Boot] [PATCH 03/11] ti_omap5_common: eth: do not define DM_ETH for spl
Tom Rini
- [U-Boot] [PATCH 04/11] drivers: net: cpsw: fix cpsw dp parse when num slaves as 1
Tom Rini
- [U-Boot] [PATCH 05/11] ARM: omap5: add platform specific ethernet phy modes configurations
Tom Rini
- [U-Boot] [PATCH 06/11] drivers: net: cpsw: add support for reading mac address from efuse
Tom Rini
- [U-Boot] [PATCH 07/11] arm: dts: am4372: add syscon node to cpsw to read mac address
Tom Rini
- [U-Boot] [PATCH 08/11] arm: dts: dra7: add syscon node to cpsw to read mac address
Tom Rini
- [U-Boot] [PATCH 09/11] defconfig: am437x_gp_evm: enable eth driver model
Tom Rini
- [U-Boot] [PATCH 10/11] defconfig: am437x_sk_evm: enable eth driver model
Tom Rini
- [U-Boot] [PATCH 11/11] defconfig: dra74_evm: enable eth driver model
Tom Rini
- [U-Boot] [PATCH V3] common: env: support sata device
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Tom Rini
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Tom Rini
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Tom Rini
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Tom Rini
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] fastboot: sparse: fix block addressing for don't care chunk type
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] fastboot: sparse: remove unnecessary logging
Tom Rini
- [U-Boot] fastboot: sparse: fix sparse blocks calculation
Tom Rini
- [U-Boot] env_eeprom invalidates gd->env_addr by setting it to an offset value
Tom Rini
- [U-Boot] arm: socfpga: sr1500: Remove USB_GADGET
Tom Rini
- [U-Boot] [U-Boot, 1/2] ARM: allow CONFIG_GICV* not to be defined
Tom Rini
- [U-Boot] [U-Boot,2/2] ARM: add Raspberry Pi 3 64-bit config
Tom Rini
- [U-Boot] ARM: rpi: add some missing Kconfig help text
Tom Rini
- [U-Boot] [U-Boot, 1/3] cmd: blkcache: remove indentation from output of 'show'
Tom Rini
- [U-Boot] [U-Boot, 2/3] cmd: blkcache: simplify sub-command handling
Tom Rini
- [U-Boot] [U-Boot, 3/3] drivers: block: fix placement of parameters
Tom Rini
- [U-Boot] README: Specify the full path for README.video
Tom Rini
- [U-Boot] board: ti: am57xx: Prevent init_sata() from being called twice
Tom Rini
- [U-Boot] test/py: pass -v option when executing sandbox
Tom Rini
- [U-Boot] spmi: Fix sandbox spmi driver memory corruption
Tom Rini
- [U-Boot] [U-Boot, v2] test/py: Add support for loading image via tftp to specified location
Tom Rini
- [U-Boot] stm32: stm32_flash: add memory barrier during flash write
Tom Rini
- [U-Boot] [U-Boot,V2] rpi: remove redundant board files
Tom Rini
- [U-Boot] am33xx changed BOOT_DEVICE_SPI to correct value
Tom Rini
- [U-Boot] disk: part: Enable get_info pointer for CONFIG_SPL_FAT_SUPPORT
Tom Rini
- [U-Boot] bootcounter_ram: Flush dcache after data is written into SDRAM
Tom Rini
- [U-Boot] test/py: README: link to example hook scripts
Tom Rini
- [U-Boot] lib/crc8: Add crc start value
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_INVAL_ALL) with asm code
Tom Rini
- [U-Boot] spl: mmc: raw: Try to load u-boot if Linux image is not found
Tom Rini
- [U-Boot] [ANN] U-Boot v2016.05-rc1 released
Tom Rini
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Tom Rini
- [U-Boot] [PATCH 06/11] drivers: net: cpsw: add support for reading mac address from efuse
Tom Rini
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Tom Rini
- [U-Boot] [PATCH 1/2] mtd: nand: am335x: spl: Fix copying of image
Tom Rini
- [U-Boot] [PATCH 2/2] spl: Support loading a FIT from NAND
Tom Rini
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Tom Rini
- [U-Boot] Please pull u-boot-sunxi master
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] Please pull u-boot-marvell/master
Tom Rini
- [U-Boot] [PATCH v2 05/12] drivers: net: cpsw: fix get mdio base and gmii_sel reg from DT
Tom Rini
- [U-Boot] [PATCH v2 06/12] drivers: net: cpsw: add support for reading mac address from efuse
Tom Rini
- [U-Boot] [PATCH v2 09/12] arm: dts: dra7: fix ethernet name with proper device address
Tom Rini
- [U-Boot] [PATCH 01/11] spi: davinci_spi: Convert to driver to adapt to DM
Tom Rini
- [U-Boot] [PATCH 02/11] keystone2: spi: do not define DM_SPI and DM_SPI_FLASH for SPL build
Tom Rini
- [U-Boot] [PATCH 03/11] ARM: dts: keystone2: add SPI aliases for davinci SPI nodes
Tom Rini
- [U-Boot] [PATCH 04/11] ARM: dts: k2hk: Enable Davinci SPI controller
Tom Rini
- [U-Boot] [PATCH 05/11] defconfig: k2hk_evm_defconfig: enable SPI driver model
Tom Rini
- [U-Boot] [PATCH 06/11] ARM: dts: k2e: Enable Davinci SPI controller
Tom Rini
- [U-Boot] [PATCH 07/11] defconfig: k2e_evm_defconfig: enable SPI driver model
Tom Rini
- [U-Boot] [PATCH 08/11] ARM: dts: k2l: Enable Davinci SPI controller
Tom Rini
- [U-Boot] [PATCH 09/11] defconfig: k2l_evm_defconfig: enable SPI driver model
Tom Rini
- [U-Boot] [PATCH 10/11] ARM: dts: k2g: add support for Davinci SPI controller
Tom Rini
- [U-Boot] [PATCH 11/11] defconfig: k2g_evm_defconfig: enable SPI driver model
Tom Rini
- [U-Boot] [PATCH 1/3] drivers/tpm/tpm_tis_sandbox.c: Fix uninitialized variable use
Tom Rini
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Tom Rini
- [U-Boot] [PATCH 3/3] drivers/power/pmic/pm8916.c: Make usid be uint32_t
Tom Rini
- [U-Boot] [PATCH] fastboot: Fix OUT transaction length alignment
Tom Rini
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] Please pull u-boot-cfi-flash/master
Tom Rini
- [U-Boot] [PATCH 3/4] ARM: dts: K2G: Add support for QSPI controller
Tom Rini
- [U-Boot] [PATCH 4/4] defconfig: k2g_evm_defconfig: Enable Cadence QSPI controller
Tom Rini
- [U-Boot] [GIT PULL] Xilinx changes
Tom Rini
- [U-Boot] is there an official MAINTAINER for u-boot POST support?
Tom Rini
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Tom Rini
- [U-Boot] worth cleaning redundancies out of some board Makefiles?
Tom Rini
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Tom Rini
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Tom Rini
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Tom Rini
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Tom Rini
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Tom Rini
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Tom Rini
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Tom Rini
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] ARM: AM43xx: Fix BOOT_DEVICE_USB ID
Tom Rini
- [U-Boot] [PATCH v2 1/2] memory: Move TI_AEMIF config to KCONFIG
Tom Rini
- [U-Boot] [PATCH v2 2/2] configs: ks2: move CMD_NAND to defconfigs
Tom Rini
- [U-Boot] [PATCH 2/2] net: increase maximum frame size to accomediate VLAN packets
Tom Rini
- [U-Boot] [PATCH 1/2] net: fix vlan validation
Tom Rini
- [U-Boot] Please pull u-boot-dm
Tom Rini
- [U-Boot] [PATCH] ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE
Tom Rini
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Tom Rini
- [U-Boot] [PATCH] x86: dts: fix DTC unit name warnings
Tom Rini
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Tom Rini
- [U-Boot] [PATCH] arm: dts: amX/draX: fix DTC unit name warnings
Tom Rini
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Tom Rini
- [U-Boot] [PATCH] efi_loader: Add debug output for efi_add_memory_map()
Tom Rini
- [U-Boot] [PATCH] usb: gadget: Disable gadget options in SPL
Tom Rini
- [U-Boot] [PATCH] sandbox: Set CONFIG_SYS_CPU
Tom Rini
- [U-Boot] [PATCH 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Tom Rini
- [U-Boot] [PATCH v2] ti_armv7_common.h: Fix U-Boot location on eMMC
Tom Rini
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Tom Rini
- [U-Boot] [PATCHv2 2/2] arm: socfpga: clean up common config options
Tom Rini
- [U-Boot] [PATCH v3] ti_armv7_common.h: Fix U-Boot location on eMMC
Tom Rini
- [U-Boot] [PATCH 1/5] drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Tom Rini
- [U-Boot] [PATCH] cmd/usb_mass_storage.c: Rework ums_init() ret logic slightly
Tom Rini
- [U-Boot] [PATCH] cmd/usb_mass_storage.c: Rework ums_init() ret logic slightly
Tom Rini
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Tom Rini
- [U-Boot] [PATCH 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Tom Rini
- [U-Boot] what is the rationale for 900+ lines duplicated in common/dlmalloc.c and include/malloc.h?
Tom Rini
- [U-Boot] uh ... is it "help" or "---help---"?
Tom Rini
- [U-Boot] [PATCH] configs: Update some Xilinx configs
Tom Rini
- [U-Boot] [U-Boot,V3] common: env: support sata device
Tom Rini
- [U-Boot] drivers: mmc: omap_hsmmc: Fix conversion of address to a pointer
Tom Rini
- [U-Boot] [U-Boot, 1/5] drivers: mmc: omap_hsmmc: request cd and wp gpios when DM_MMC is defined
Tom Rini
- [U-Boot] [U-Boot, 2/5] ARM: dts: am43xx: fix cd-gpios definition as per hardware design and dt binding docs
Tom Rini
- [U-Boot] [U-Boot, 3/5] ARM: dts: dra7xx: am57xx: fix cd-gpios definition as per hardware design and dt binding docs
Tom Rini
- [U-Boot] [U-Boot, 4/5] configs: dra72_evm: enable mmc driver model
Tom Rini
- [U-Boot] [U-Boot, 5/5] configs: dra74_evm: enable mmc driver model
Tom Rini
- [U-Boot] [U-Boot,2/3] bcm281xx: enable CONFIG_OF_LIBFDT
Tom Rini
- [U-Boot] [U-Boot,3/3] bcm281xx: save ENV to MMC
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Tom Rini
- [U-Boot] am57x: Move CONS_INDEX to Kconfig
Tom Rini
- [U-Boot] board: ti: am57xx: Update EMIF SDRAM 1 and 3 Timings
Tom Rini
- [U-Boot] board: ti: am57xx: Add support for am572x idk in SPL
Tom Rini
- [U-Boot] [U-Boot,1/8] iso: Make little endian and 64bit safe
Tom Rini
- [U-Boot] [U-Boot,2/8] iso: Start with partition 1
Tom Rini
- [U-Boot] [U-Boot,3/8] iso: Allow 512 byte sector size
Tom Rini
- [U-Boot] [U-Boot, 4/8] efi_loader: Split drive add into function
Tom Rini
- [U-Boot] [U-Boot,5/8] efi_loader: Add el torito support
Tom Rini
- [U-Boot] [U-Boot,6/8] efi_loader: Pass file path to payload
Tom Rini
- [U-Boot] [U-Boot, 7/8] efi_loader: Increase path string to 32 characters
Tom Rini
- [U-Boot] [U-Boot,8/8] distro: Enable iso partition code
Tom Rini
- [U-Boot] efi_loader: Use system fdt as fallback
Tom Rini
- [U-Boot] dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE
Tom Rini
- [U-Boot] efi_loader: Always flush in cache line size granularity
Tom Rini
- [U-Boot] [U-Boot, 1/2] efi_loader: Put fdt into convenient location
Tom Rini
- [U-Boot] [U-Boot, 2/2] efi_loader: Expose ascending efi memory map
Tom Rini
- [U-Boot] gunzip.c: use block layer for writes
Tom Rini
- [U-Boot] m68k: fix broken buildman m68k
Tom Rini
- [U-Boot] [U-Boot, 2/3] drivers/gpio/pm8916_gpio.c: Make pid be uint32_t
Tom Rini
- [U-Boot] [U-Boot, 3/3] drivers/power/pmic/pm8916.c: Make usid be uint32_t
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] memory: Move TI_AEMIF config to KCONFIG
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] configs: ks2: move CMD_NAND to defconfigs
Tom Rini
- [U-Boot] ARM: AM43xx: Fix BOOT_DEVICE_USB ID
Tom Rini
- [U-Boot] [U-Boot,v2] efi_loader: Handle memory overflows
Tom Rini
- [U-Boot] dragonboard410c: Fix environment variables
Tom Rini
- [U-Boot] Remove references to CONFIG_CMD_EXT3, no such command
Tom Rini
- [U-Boot] doc: Updated README.ext4
Tom Rini
- [U-Boot] serial: bcm283x_mu: make pending values more explicit
Tom Rini
- [U-Boot] ahci: flush dcache before issuing command
Tom Rini
- [U-Boot] ahci: flush dcache before issuing command
Tom Rini
- [U-Boot] board: Remove overlooked vestiges of "dave" board.
Tom Rini
- [U-Boot] [U-Boot, v2, 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Tom Rini
- [U-Boot] [U-Boot, v2, 2/2] efi_loader: Fall back to fdtfile naming convention
Tom Rini
- [U-Boot] bx50v3: Enable CONFIG_OF_LIBFDT in defconfig
Tom Rini
- [U-Boot] ARM: always perform per-CPU GIC init
Tom Rini
- [U-Boot] Kconfig: Simple aesthetic/grammar fixes to top-level Kconfig
Tom Rini
- [U-Boot] [GIT PULL] u-boot-mips/master
Tom Rini
- [U-Boot] [PULL] u-boot-socfpga/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] [PATCH] configs: Update some Xilinx configs
Tom Rini
- [U-Boot] [PATCH] cmd/usb_mass_storage.c: Rework ums_init() ret logic slightly
Tom Rini
- [U-Boot] uh ... is it "help" or "---help---"?
Tom Rini
- [U-Boot] what is the rationale for 900+ lines duplicated in common/dlmalloc.c and include/malloc.h?
Tom Rini
- [U-Boot] [PATCH] spl: spl_mmc: Disambiguate error message
Tom Rini
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Tom Rini
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Tom Rini
- [U-Boot] [ANN] U-Boot v2016.05-rc2 released
Tom Rini
- [U-Boot] [PATCH 01/16] doc: Add info on using secure devices from TI
Tom Rini
- [U-Boot] [PATCH 02/16] arm: am33xx: Kconfig: Add secure device definitions
Tom Rini
- [U-Boot] [PATCH 04/16] ti: omap-common: Add Kconfig file for secure device support
Tom Rini
- [U-Boot] [PATCH 05/16] ti: omap-common: Add commands for generating secure SPL images
Tom Rini
- [U-Boot] [PATCH 06/16] ti: AM43xx: config.mk: Add support for generating secure boot images
Tom Rini
- [U-Boot] [PATCH 07/16] ti: AM43xx: Use CONFIG options from SOC Kconfig
Tom Rini
- [U-Boot] [PATCH 08/16] ti: AM43xx: board: Detect AM43xx HS EVM
Tom Rini
- [U-Boot] [PATCH 10/16] ti_omap5_common: Update SPL start address on secure parts
Tom Rini
- [U-Boot] [PATCH 11/16] spl: build: ti: add support for secure boot images
Tom Rini
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Tom Rini
- [U-Boot] [PATCH 13/16] ARM: omap5: add hooks for cpu/SoC fdt fixups
Tom Rini
- [U-Boot] [PATCH 14/16] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Tom Rini
- [U-Boot] [PATCH 15/16] ARM: omap5: Add config for board/cpu fdt fixups
Tom Rini
- [U-Boot] [PATCH 16/16] defconfig: ti: Add configs for OMAP5-class secure parts
Tom Rini
- [U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts
Tom Rini
- [U-Boot] [PATCH 1/7] ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.
Tom Rini
- [U-Boot] [PATCH 2/7] MAINTAINERS: Add myself as maintainer for hikey
Tom Rini
- [U-Boot] [PATCH 3/7] ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Tom Rini
- [U-Boot] [PATCH 4/7] ARM: hisilicon: hikey: Implement reset_cpu() for hikey.
Tom Rini
- [U-Boot] [PATCH 5/7] ARM: hisilicon: hikey: dts: Add pl011 additional clock binding.
Tom Rini
- [U-Boot] [PATCH 6/7] ARM: hisilicon: hikey: Align memory node with upstream kernel
Tom Rini
- [U-Boot] [PATCH 7/7] ARM: hikey: Simplify README instructions.
Tom Rini
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Tom Rini
- [U-Boot] [PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Tom Rini
- [U-Boot] [PATCH] common/dlmalloc.c: Delete content that was moved to malloc.h
Tom Rini
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Tom Rini
- [U-Boot] [PATCH 2/2] armv8: s32v234: Introduce basic support for s32v234evb
Tom Rini
- [U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts
Tom Rini
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Tom Rini
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Tom Rini
- [U-Boot] Unable to compile
Tom Rini
- [U-Boot] Please pull ARC changes
Tom Rini
- [U-Boot] Please pull u-boot-x86
Tom Rini
- [U-Boot] [PATCH] drivers: dfu: ram: fix a crash with dfu ram with invalid dfu_alt_info env
Tom Rini
- [U-Boot] Unable to compile
Tom Rini
- [U-Boot] [PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Tom Rini
- [U-Boot] [PATCH 0/4] configs and cmd/Kconfig: Re-sync
Tom Rini
- [U-Boot] [PATCH 1/4] configs: Re-sync HUSH options
Tom Rini
- [U-Boot] [PATCH 2/4] configs: Re-sync CONFIG_USB_MUSB_HOST
Tom Rini
- [U-Boot] [PATCH 3/4] configs: Re-sync almost all of cmd/Kconfig
Tom Rini
- [U-Boot] [PATCH 4/4] include/configs: Whitespace fixup
Tom Rini
- [U-Boot] igep0030_nand_defconfig compile is broken
Tom Rini
- [U-Boot] [PATCH] omap3_igep00x0.h: Drop SPL MMC support on BOOT_NAND
Tom Rini
- [U-Boot] [PATCH] omap3_igep00x0.h: Drop SPL MMC support on BOOT_NAND
Tom Rini
- [U-Boot] [PATCH] distro: Disable iso partition format for SPL
Tom Rini
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Tom Rini
- [U-Boot] [ANN] U-Boot v2016.05-rc2 released
Tom Rini
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Tom Rini
- [U-Boot] [PATCH] configs: Re-sync with cmd/Kconfig
Tom Rini
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Tom Rini
- [U-Boot] [PATCH v5 3/4] arm: add initial support for Amlogic Meson and ODROID-C2
Tom Rini
- [U-Boot] [PATCH v3 0/8] Add support for Espresso7420 board
Tom Rini
- [U-Boot] ELC Europe mini-summit?
Tom Rini
- [U-Boot] [PATCH 1/1] pico-imx6ul: Update the defconfig
Tom Rini
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Tom Rini
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Tom Rini
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Tom Rini
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Tom Rini
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Tom Rini
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Tom Rini
- [U-Boot] Pull request: u-boot-ubi/master
Tom Rini
- [U-Boot] Please pull from u-boot-i2c
Tom Rini
- [U-Boot] [PULL] Please pull u-boot-imx
Tom Rini
- [U-Boot] pull request: u-boot-uniphier/master
Tom Rini
- [U-Boot] [PULL] u-boot-usb/master
Tom Rini
- [U-Boot] Please pull: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH 1/4] configs: Re-sync HUSH options
Tom Rini
- [U-Boot] [PATCH 2/4] configs: Re-sync CONFIG_USB_MUSB_HOST
Tom Rini
- [U-Boot] [PATCH 3/4] configs: Re-sync almost all of cmd/Kconfig
Tom Rini
- [U-Boot] [PATCH 4/4] include/configs: Whitespace fixup
Tom Rini
- [U-Boot] [PATCH] configs: Re-sync with cmd/Kconfig
Tom Rini
- [U-Boot] sf: fix timebase data type in _wait_ready()
Tom Rini
- [U-Boot] [U-Boot, v3] ti_armv7_common.h: Fix U-Boot location on eMMC
Tom Rini
- [U-Boot] [U-Boot, 1/7] ARM: hisilicon: hikey: Add hikey & hi6220 dts from v4.6-rc3.
Tom Rini
- [U-Boot] [U-Boot, 2/7] MAINTAINERS: Add myself as maintainer for hikey
Tom Rini
- [U-Boot] [U-Boot, 3/7] ARM: hisilicon: hikey: Enable OF_CONTROL for hikey board.
Tom Rini
- [U-Boot] [U-Boot, 4/7] ARM: hisilicon: hikey: Implement reset_cpu() for hikey.
Tom Rini
- [U-Boot] [U-Boot, 5/7] ARM: hisilicon: hikey: dts: Add pl011 additional clock binding.
Tom Rini
- [U-Boot] [U-Boot, 6/7] ARM: hisilicon: hikey: Align memory node with upstream kernel
Tom Rini
- [U-Boot] [U-Boot, 7/7] ARM: hikey: Simplify README instructions.
Tom Rini
- [U-Boot] spl: spl_mmc: Disambiguate error message
Tom Rini
- [U-Boot] common/dlmalloc.c: Delete content that was moved to malloc.h
Tom Rini
- [U-Boot] [U-Boot, 1/4] ARM: OMAP5/DRA7: Get rid of control_std_fuse_opp_vdd_mpu_2
Tom Rini
- [U-Boot] [U-Boot, 2/4] ARM: OMAP5/DRA7: Move ABB TXDONE mask to voltage structure
Tom Rini
- [U-Boot] [U-Boot, 3/4] ARM: OMAP5: Enable ABB configuration for MM voltage domain
Tom Rini
- [U-Boot] [U-Boot,4/4] ARM: DRA7: Add ABB setup for all domains
Tom Rini
- [U-Boot] mmc: sdhci: add const qualifier to the name of struct sdhci_host
Tom Rini
- [U-Boot] [U-Boot,v3] pci: Device scanning range fix
Tom Rini
- [U-Boot] [U-Boot, PATCHv2] cmd: Kconfig: Add a Kconfig options for a few CMD
Tom Rini
- [U-Boot] [PATCH 1/1] pico-imx6ul: Update the defconfig
Tom Rini
- [U-Boot] [ANN] v2016.05-rc3
Tom Rini
- [U-Boot] please pull u-boot-samsung master
Tom Rini
- [U-Boot] [PATCH] omap3_igep00x0.h: Drop SPL MMC support on BOOT_NAND
Tom Rini
- [U-Boot] [PATCH] ARM: uniphier: revive some commands lost by Kconfig re-sync
Tom Rini
- [U-Boot] [PATCH] ARM64: zynqmp: Cleanup config file after CMD move
Tom Rini
- [U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT
Tom Rini
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Tom Rini
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Tom Rini
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Tom Rini
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Tom Rini
- [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL.
Tom Rini
- [U-Boot] Problem of git clone with http
Tom Rini
- [U-Boot] [ANN] v2016.05-rc3
Tom Rini
- [U-Boot] [PATCH] arm: dra7xx: Extend bootloader partition
Tom Rini
- [U-Boot] imx6 devices failing to build with 2016.05
Tom Rini
- [U-Boot] imx6 devices failing to build with 2016.05
Tom Rini
- [U-Boot] [PATCH] omap3: Reduce logic/overo SPL max image size
Tom Rini
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Tom Rini
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Tom Rini
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Tom Rini
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Tom Rini
- [U-Boot] [PATCH] video: ipu_common: fix build error
Tom Rini
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Tom Rini
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Tom Rini
- [U-Boot] change the relocate address of u-boot
Tom Rini
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Tom Rini
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Tom Rini
- [U-Boot] Fwd: change the relocate address of u-boot
Tom Rini
- [U-Boot] Please pull u-boot-sunxi master
Tom Rini
- [U-Boot] Please pull: u-boot-video/master
Tom Rini
- [U-Boot] [PATCH] omap3: Reduce logic/overo SPL max image size
Tom Rini
- [U-Boot] [PATCH] omap3: Reduce logic/overo SPL max image size
Tom Rini
- [U-Boot] spl_mmc: allow to load raw image
Tom Rini
- [U-Boot] spl_mmc: allow to load raw image
Tom Rini
- [U-Boot] [PATCH] x86: qemu: Move qfw command over to cmd and add Kconfig entry
Tom Rini
- [U-Boot] [PATCH 0/2] cmd: fdt: Add device tree overlays support
Maxime Ripard
- [U-Boot] [PATCH RESEND 0/2] cmd: fdt: Add device tree overlays support
Maxime Ripard
- [U-Boot] [PATCH RESEND 1/2] cmd: fdt: Narrow the check for fdt addr
Maxime Ripard
- [U-Boot] [PATCH RESEND 2/2] cmd: fdt: add fdt overlay application subcommand
Maxime Ripard
- [U-Boot] [ANN] U-Boot v2016.05-rc2 released
Peter Robinson
- [U-Boot] imx6 devices failing to build with 2016.05
Peter Robinson
- [U-Boot] imx6 devices failing to build with 2016.05
Peter Robinson
- [U-Boot] [PATCH] video: ipu_common: fix build error
Peter Robinson
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Stefan Roese
- [U-Boot] [PATCH 2/6 v3] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375
Stefan Roese
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Stefan Roese
- [U-Boot] [PATCH 1/6] spi: kirkwood_spi.c: Add compatible match ID for Armada 375
Stefan Roese
- [U-Boot] [PATCH 3/6] dt-bindings: Add include/dt-bindings/phy/phy.h from Linux v4.4
Stefan Roese
- [U-Boot] [PATCH 4/6] arm: mvebu: Add basic support for the Marvell Armada 375 SoC
Stefan Roese
- [U-Boot] [PATCH 5/6] arm: mvebu: Add basic support for Armada 375 eval board db-88f6720
Stefan Roese
- [U-Boot] [PATCH 6/6] arm: mvebu: Don't enable d-cache on A375
Stefan Roese
- [U-Boot] [PATCH 2/6 v3] net: mvpp2.c: Add Marvell mvpp2 network driver for Armada 375
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Stefan Roese
- [U-Boot] [U-Boot, v3, 5/9] Drop command-processing code when CONFIG_CMDLINE is disabled
Stefan Roese
- [U-Boot] [PATCH] common: cli: Fix typo CONFIG_CMDINE -> CONFIG_CMDLINE
Stefan Roese
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Stefan Roese
- [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH 4/6] net: mii: Changes not made by spatch
Stefan Roese
- [U-Boot] [PATCH] bootcounter_ram: Flush dcache after data is written into SDRAM
Stefan Roese
- [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH v2] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH v3] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH v3] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] [PATCH v2] kirkwood_nand: claim MPP pins on the fly
Stefan Roese
- [U-Boot] [PATCH v3] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] Fwd: Marvell Armada XP u-boot from uart
Stefan Roese
- [U-Boot] [PATCH] gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
Stefan Roese
- [U-Boot] [PATCH 1/2] arm: mvebu: theadorable: Add USB power toggle and tweak USB PHY register
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: mvebu: theadorable: Add bootcounter support
Stefan Roese
- [U-Boot] Newbie SPL question for socfpga_sockit
Stefan Roese
- [U-Boot] [PATCH] lib/crc8: Add crc start value
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: mvebu: Add base address for 2nd I2C controller
Stefan Roese
- [U-Boot] [PATCH 2/3] arm: mvebu: theadorable: Enable 2nd I2C controller
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: mvebu: theadorable: Add PEX-switch detection and reset code
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: theadorable: Remove Board name output in checkboard
Stefan Roese
- [U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
Stefan Roese
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Stefan Roese
- [U-Boot] Please pull u-boot-marvell/master
Stefan Roese
- [U-Boot] [PATCH v3] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] Newbie SPL question for socfpga_sockit
Stefan Roese
- [U-Boot] SYS_VENDOR for sr1500 board?
Stefan Roese
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] [PATCH] arm: mvebu: theadorable: Enable CONFIG_ZERO_BOOTDELAY_CHECK
Stefan Roese
- [U-Boot] [PATCH] bugfix: unlock current sector instead of sector 0 before, buffered write
Stefan Roese
- [U-Boot] Please pull u-boot-cfi-flash/master
Stefan Roese
- [U-Boot] is there any value to board/dave/ directory?
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: clean up common config options
Stefan Roese
- [U-Boot] [PATCH 1/2] arm: socfpga: Fix typos in DT files (environmnet -> environment)
Stefan Roese
- [U-Boot] [PATCH 2/2] arm: socfpga: socrates: Add eth0 alias to enable ethernet
Stefan Roese
- [U-Boot] [PATCHv2 2/2] arm: socfpga: clean up common config options
Stefan Roese
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Stefan Roese
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Stefan Roese
- [U-Boot] [PATCH 6/6] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Stefan Roese
- [U-Boot] [PATCH] dm: core: Add dev_get_addr_ptr() to return a pointer to the reg address
Stefan Roese
- [U-Boot] [PATCH v2] dm: core: Add dev_get_addr_ptr() to return a pointer to the reg address
Stefan Roese
- [U-Boot] [PATCH 1/6 v4] i2c: designware_i2c: Add ic_enable_status to ic_regs struct
Stefan Roese
- [U-Boot] [PATCH 2/6 v4] i2c: designware_i2c: Add dw_i2c_enable() helper function
Stefan Roese
- [U-Boot] [PATCH 3/6 v4] i2c: designware_i2c: Integrate set_speed() into dw_i2c_set_bus_speed()
Stefan Roese
- [U-Boot] [PATCH 4/6 v4] i2c: designware_i2c: Prepare for DM driver conversion
Stefan Roese
- [U-Boot] [PATCH 5/6 v4] i2c: designware_i2c: Add DM support
Stefan Roese
- [U-Boot] [PATCH 6/6 v4] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Stefan Roese
- [U-Boot] Issue with USB mass storage (thumb drives)
Stefan Roese
- [U-Boot] RFC: i.MX6 write U-Boot to NAND
Stefan Roese
- [U-Boot] RFC: i.MX6 write U-Boot to NAND
Stefan Roese
- [U-Boot] [PATCH] i2c: designware_i2c: Optionally check enable status register
Stefan Roese
- [U-Boot] [PATCH 1/3] arm: spear: x600: Add support for Micrel KSZ9031 PHY
Stefan Roese
- [U-Boot] [PATCH 2/3] arm: spear: x600: Remove EFI support to reduce image size
Stefan Roese
- [U-Boot] [PATCH 3/3] arm: spear: Disable I2C designware enable status reg check
Stefan Roese
- [U-Boot] [PATCH] fs: ext4: fix symlink read function
Stefan Roese
- [U-Boot] [PATCH v2] fs: ext4: fix symlink read function
Stefan Roese
- [U-Boot] [PATCH] arm: socfpga: socrates: Add 'time' command
Stefan Roese
- [U-Boot] [PATCH] i2c: designware_i2c: Optionally check enable status register
Stefan Roese
- [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling
Stefan Roese
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Stefan Roese
- [U-Boot] [PATCH 1/4] usb: dwc2: Pass private data into dwc_otg_core_init()
Stefan Roese
- [U-Boot] [PATCH 2/4] usb: dwc2: Pull Ext VBUS macro from dwc_otg_core_init()
Stefan Roese
- [U-Boot] [PATCH 3/4] usb: dwc2: Make OC protection configurable
Stefan Roese
- [U-Boot] [PATCH 4/4] ARM: socfpga: Disable USB OC protection on SoCrates
Stefan Roese
- [U-Boot] [PATCH 1/3] i2c: Add entry for Designware I2C driver in Kconfig
Stefan Roese
- [U-Boot] [PATCH 2/3] i2c: config: Move SYS_I2C_DW to Kconfig
Stefan Roese
- [U-Boot] [PATCH 3/3] i2c: Select SYS_I2C_DW_ENABLE_STATUS_UNSUPPORTED for SPEAr
Stefan Roese
- [U-Boot] [PATCH 1/2] mtd: cqspi: Simplify indirect write code
Stefan Roese
- [U-Boot] EFI Stub compilation errors
Nicolae Rosia
- [U-Boot] [PATCH] WIP: Example changes to build EFI stub for x86
Nicolae Rosia
- [U-Boot] [PATCH 08/16] ARM: zynq: zc706: Add adv7511 on i2c bus
Nathan Rossi
- [U-Boot] [PATCH 09/16] ARM: zynq: Align spi and qspi node locations
Nathan Rossi
- [U-Boot] [PATCH 12/16] ARM: zynq: Extend microzed board support
Nathan Rossi
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Måns Rullgård
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Otavio Salvador
- [U-Boot] [PATCH] mx6ul_evk: Remove SPL support
Otavio Salvador
- [U-Boot] Problem: loading U-Boot from NAND while running SPL from SRAM
Ahmed Samir
- [U-Boot] [PATCH 1/2] serial_sh: Device Tree support
Yoshinori Sato
- [U-Boot] [PATCH 2/2] serial_sh: Add standrad SCI (w/o FIFO) support
Yoshinori Sato
- [U-Boot] [PATCH] env_ext4: fix build error.
Yoshinori Sato
- [U-Boot] [PATCH] pci: Device scanning range fix.
Yoshinori Sato
- [U-Boot] [PATCH v2] pci: Device scanning range fix.
Yoshinori Sato
- [U-Boot] [PATCH v2] pci: Device scanning range fix.
Yoshinori Sato
- [U-Boot] [PATCH v3] pci: Device scanning range fix
Yoshinori Sato
- [U-Boot] Antwort: [PATCH] drivers/video/am335x-fb: Fix bits for LCD_PALMODE_RAWDATA definition
Hannes Schmelzer
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Hannes Schmelzer
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Hannes Schmelzer
- [U-Boot] [PATCH 2/2] drivers/video/am335x-fb: Properly point framebuffer behind palette
Hannes Schmelzer
- [U-Boot] [PATCH 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Hannes Schmelzer
- [U-Boot] [PATCH v2 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Hannes Schmelzer
- [U-Boot] [PATCH v3 1/2] drivers/video/am335x-fb: Add support for 16bpp format
Hannes Schmelzer
- [U-Boot] Marvell Switch // U-Boot
Hannes Schmelzer
- [U-Boot] travis build fails
Heiko Schocher
- [U-Boot] Potential memory corruption in drivers/net/sh_eth.c ?
Heiko Schocher
- [U-Boot] [RFC 2/2] dm: i2c: Add driver for Cadence I2C IP
Heiko Schocher
- [U-Boot] [PATCHv7 6/7] igep00x0: UBIize
Heiko Schocher
- [U-Boot] [PATCH v2 1/2] i2c: Describe Cadence I2C devicetree bindings
Heiko Schocher
- [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
Heiko Schocher
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Heiko Schocher
- [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
Heiko Schocher
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Heiko Schocher
- [U-Boot] [PATCH] ARM64: zynqmp: Use i2c cadence DM driver
Heiko Schocher
- [U-Boot] [PATCH 4/6 v2] i2c: designware_i2c: Prepare for DM driver conversion
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] x86: dts: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: amX/draX: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [RFC PATCH] arm, m68k: fix out-of-range jump
Heiko Schocher
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [RFC PATCH] arm, m68k: fix out-of-range jump
Heiko Schocher
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Heiko Schocher
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH] x86: dts: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH 1/4] i2c: cdns: Read address from DT in ofdata_to_platdata
Heiko Schocher
- [U-Boot] [PATCH 2/4] i2c: cdns: Moving speed setup from probe to set_bus_speed function
Heiko Schocher
- [U-Boot] [PATCH 3/4] i2c: cdns: Support different bus speeds
Heiko Schocher
- [U-Boot] [PATCH 4/4] i2c: muxes: Add support for TI PCA954X mux
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: vf6: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH v2] arm: dts: vf6: fix DTC unit warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Heiko Schocher
- [U-Boot] [PATCH 06/60] i2c: tegra: move header file to driver directory
Heiko Schocher
- [U-Boot] [PATCH 6/6 v4] i2c: designware_i2c: Add support for PCI(e) based I2C cores (x86)
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] [PATCH] ubifs: fix memory corruption in super.c
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Heiko Schocher
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Heiko Schocher
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] Pull request: u-boot-ubi/master
Heiko Schocher
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Heiko Schocher
- [U-Boot] Please pull from u-boot-i2c
Heiko Schocher
- [U-Boot] igep0030_nand_defconfig compile is broken
Heiko Schocher
- [U-Boot] [PATCH] distro: Disable iso partition format for SPL
Heiko Schocher
- [U-Boot] [PATCH] distro: Disable iso partition format for SPL
Heiko Schocher
- [U-Boot] ELC Europe mini-summit?
Heiko Schocher
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Heiko Schocher
- [U-Boot] RFC: i.MX6 write U-Boot to NAND
Heiko Schocher
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Heiko Schocher
- [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL.
Heiko Schocher
- [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL.
Heiko Schocher
- [U-Boot] [PATCH v2 03/15] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Heiko Schocher
- [U-Boot] [PATCH] i2c: designware_i2c: Optionally check enable status register
Heiko Schocher
- [U-Boot] [PATCH] test, tools: update tbot documentation
Heiko Schocher
- [U-Boot] [PATCH] i2c: designware_i2c: Optionally check enable status register
Heiko Schocher
- [U-Boot] Ethernet via USB on Sinlinx SinA33
Quentin Schulz
- [U-Boot] Ethernet via USB on Sinlinx SinA33
Quentin Schulz
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Daniel Schwierzeck
- [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].
Daniel Schwierzeck
- [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: Report reloc information in bdinfo
Daniel Schwierzeck
- [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs
Daniel Schwierzeck
- [U-Boot] [PATCH v3 1/2] flash: add device ID for Microchip PIC32 internal flash.
Daniel Schwierzeck
- [U-Boot] [PATCH v3 2/2] drivers: mtd: add Microchip PIC32 internal non-CFI flash driver.
Daniel Schwierzeck
- [U-Boot] [PATCH 0/4] QEMU (qemu-mips) and MIPS 64-bit changes
Daniel Schwierzeck
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Daniel Schwierzeck
- [U-Boot] [PATCH 0/4] ath79: fix some minor defects
Daniel Schwierzeck
- [U-Boot] [PATCH] MIPS: bootm: Add fixup of '/memory' node.
Daniel Schwierzeck
- [U-Boot] [GIT PULL] u-boot-mips/master
Daniel Schwierzeck
- [U-Boot] [PATCH] arm: socfpga: Nuke useless include
Chin Liang See
- [U-Boot] [PATCH V2] arm: socfpga: Nuke useless include
Chin Liang See
- [U-Boot] Newbie SPL question for socfpga_sockit
Chin Liang See
- [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL.
Enric Balletbo i Serra
- [U-Boot] [PATCHv7 6/7] igep00x0: UBIize
Enric Balletbo Serra
- [U-Boot] [PATCHv7 6/7] igep00x0: UBIize
Enric Balletbo Serra
- [U-Boot] [PATCH] omap3_igep00x0.h: Drop SPL MMC support on BOOT_NAND
Enric Balletbo Serra
- [U-Boot] [PATCH] omap3_igep00x0.h: Drop SPL MMC support on BOOT_NAND
Enric Balletbo Serra
- [U-Boot] [PATCH] igep00x0: Use all SRAM available for SPL.
Enric Balletbo Serra
- [U-Boot] [PATCH] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Bhupesh Sharma
- [U-Boot] u-boot version for Linux kernel 3.18
Vijay Shrivastav
- [U-Boot] [linux-sunxi] A10 bring up and DRAM configuration procedure
Siarhei Siamashka
- [U-Boot] [PATCH] sunxi: mctl_mem_matches: Add missing memory barrier
Siarhei Siamashka
- [U-Boot] [PATCH 0/1]
Vincent Siles
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
Vincent Siles
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
Vincent Siles
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
Vincent Siles
- [U-Boot] [PATCH v2 1/2] arm: Fix SCFG ICID reg addresses
Vincent Siles
- [U-Boot] [PATCH v2 2/2] arm: uniform usage of u32 in ls102x caam config
Vincent Siles
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH v2] test/py: Add support for loading image via tftp to specified location
Michal Simek
- [U-Boot] [PATCH] test/py: Add support for loading image via tftp to specified location
Michal Simek
- [U-Boot] [GIT PULL] Xilinx changes
Michal Simek
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH] disk: part: Enable get_info pointer for CONFIG_SPL_FAT_SUPPORT
Michal Simek
- [U-Boot] [PATCH] dm: ns16550: Add support for reg-offset property
Michal Simek
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [uboot] [PATCH 2/2] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [uboot] [PATCH v2 1/2] net: phy: dp83867: Add device tree bindings and documentation
Michal Simek
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Michal Simek
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Michal Simek
- [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Michal Simek
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Michal Simek
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Michal Simek
- [U-Boot] [PATCH v2 1/2] kconfig: Move CONFIG_OF_LIBFDT to Kconfig
Michal Simek
- [U-Boot] [PATCH 01/16] ARM: zynq: Add interrupt-controller property to gpio nodes
Michal Simek
- [U-Boot] [PATCH 02/16] ARM: dts: zynq: Add devicetree entry for Xilinx Zynq reset controller.
Michal Simek
- [U-Boot] [PATCH 03/16] ARM: dts: Updated devicetree bindings for Zynq 7000 platform
Michal Simek
- [U-Boot] [PATCH 04/16] ARM: zynq: Align devcfg node
Michal Simek
- [U-Boot] [PATCH 05/16] ARM: zynq: Fix bootargs in board dtsi
Michal Simek
- [U-Boot] [PATCH 06/16] ARM: zynq: DT: Add ethernet phy reset information
Michal Simek
- [U-Boot] [PATCH 07/16] ARM: zynq: zc702: Add adv7511 on i2c bus
Michal Simek
- [U-Boot] [PATCH 08/16] ARM: zynq: zc706: Add adv7511 on i2c bus
Michal Simek
- [U-Boot] [PATCH 09/16] ARM: zynq: Align spi and qspi node locations
Michal Simek
- [U-Boot] [PATCH 10/16] ARM: zynq: Create empty line below headers
Michal Simek
- [U-Boot] [PATCH 11/16] ARM: zynq: Add missing qspi for xm013
Michal Simek
- [U-Boot] [PATCH 12/16] ARM: zynq: Extend microzed board support
Michal Simek
- [U-Boot] [PATCH 13/16] ARM: zynq: Fix usb phy node for Zybo
Michal Simek
- [U-Boot] [PATCH 14/16] ARM: zynq: Use memory initialization based on DTS file
Michal Simek
- [U-Boot] [PATCH 15/16] ARM: zynq: Support systems with more memory banks
Michal Simek
- [U-Boot] [PATCH 16/16] ARM: zynq: Do not perform reset at the end of thor
Michal Simek
- [U-Boot] [PATCH 01/33] ARM64: zynqmp: Move kernel and fdt offsets and sizes to board config file
Michal Simek
- [U-Boot] [PATCH 02/33] ARM64: zynqmp: Use C pre-processor for includes in dts
Michal Simek
- [U-Boot] [PATCH 03/33] ARM64: zynqmp: Add missing mmc aliases
Michal Simek
- [U-Boot] [PATCH 04/33] ARM64: zynqmp: dt: Change qspi node compatible string
Michal Simek
- [U-Boot] [PATCH 05/33] ARM64: zynqmp: Add 8-bit bus width property.
Michal Simek
- [U-Boot] [PATCH 06/33] ARM64: zynqmp: Correct IRQ nr for the SMMU
Michal Simek
- [U-Boot] [PATCH 07/33] ARM64: zynqmp: Hook up the GEMs to the SMMU
Michal Simek
- [U-Boot] [PATCH 08/33] ARM64: zynqmp: Sync GEM nodes with Linux
Michal Simek
- [U-Boot] [PATCH 09/33] ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes
Michal Simek
- [U-Boot] [PATCH 10/33] ARM64: zynqmp: DT: Add power domains
Michal Simek
- [U-Boot] [PATCH 11/33] ARM64: zynqmp: Add missing interrupt-parent to PMU node
Michal Simek
- [U-Boot] [PATCH 12/33] ARM64: zynqmp: Add CCI-400 node
Michal Simek
- [U-Boot] [PATCH 13/33] ARM64: zynqmp: Added clocks to DT
Michal Simek
- [U-Boot] [PATCH 14/33] ARM64: zynqmp: Add ddrc node in dts
Michal Simek
- [U-Boot] [PATCH 15/33] ARM64: zynqmp: Add interrupt-controller property to gpio nodes
Michal Simek
- [U-Boot] [PATCH 16/33] ARM64: zynqmp: Extend pcie node to support legacy interrupts
Michal Simek
- [U-Boot] [PATCH 17/33] ARM64: zynqmp: Fix coding style for pcie
Michal Simek
- [U-Boot] [PATCH 18/33] ARM64: zynqmp: Add backward compatible string for uart
Michal Simek
- [U-Boot] [PATCH 19/33] ARM64: zynqmp: Align node address with parent node for dpdma
Michal Simek
- [U-Boot] [PATCH 20/33] ARM64: zynqmp: Use correct addresses in node names
Michal Simek
- [U-Boot] [PATCH 21/33] ARM64: zynqmp: dp: Add default properties to zynqmp.dtsi
Michal Simek
- [U-Boot] [PATCH 22/33] ARM64: zynqmp: Align register description
Michal Simek
- [U-Boot] [PATCH 23/33] ARM64: zynqmp: Add serdes address space dp driver
Michal Simek
- [U-Boot] [PATCH 24/33] ARM64: zynqmp: Fix DWC3 binding with the kernel
Michal Simek
- [U-Boot] [PATCH 25/33] ARM64: zynqmp: Use 64bit size cell format for memory node
Michal Simek
- [U-Boot] [PATCH 26/33] ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts
Michal Simek
- [U-Boot] [PATCH 27/33] ARM64: zynqmp: Add missing nand node for ep108
Michal Simek
- [U-Boot] [PATCH 28/33] ARM64: zynqmp: Do not setup DM_ETH/GPIO/MMC by default for all boards
Michal Simek
- [U-Boot] [PATCH 29/33] ARM64: zynqmp: Extend early malloc space to be able to run DM drivers
Michal Simek
- [U-Boot] [PATCH 30/33] ARM64: zynqmp: Make DDR detection code work on 32bit system
Michal Simek
- [U-Boot] [PATCH 31/33] ARM64: zynqmp: Add support for ZCU102 platform
Michal Simek
- [U-Boot] [PATCH 32/33] ARM64: zynqmp: Add support for zc1751 with DC cards
Michal Simek
- [U-Boot] [PATCH 33/33] ARM64: zynqmp: Clean header after moving stuff to Kconfig
Michal Simek
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Michal Simek
- [U-Boot] [uboot][PATCH v3 1/2] net: phy: dp83867: Add device tree bindings and documentation
Michal Simek
- [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [uboot] [PATCH 5/7] net: phy: Move is_rgmii helper to phy.h
Michal Simek
- [U-Boot] [uboot] [PATCH 6/7] net: phy: Add phy_interface_is_sgmii to phy.h
Michal Simek
- [U-Boot] [uboot] [PATCH 7/7] net: phy: dp83867: Add SGMII helper for configuration
Michal Simek
- [U-Boot] [uboot] [PATCH v4 3/7] net: phy: dp83867: Add device tree bindings and documentation
Michal Simek
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [uboot] [PATCH 2/7] net: zynq_gem: Add the passing of the phy-handle node
Michal Simek
- [U-Boot] [uboot] [PATCH 1/7] drivers: net: cpsw: Add readinf of DT phy-handle node
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Add defconfig for zcu102 revB board
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Remove netdev.h from board file
Michal Simek
- [U-Boot] [PATCH 1/7] gpio: zynq: Convert Zynq GPIO to driver model
Michal Simek
- [U-Boot] [PATCH 2/7] gpio: Kconfig: Enable Zynq GPIO driver using kconfig
Michal Simek
- [U-Boot] [PATCH 3/7] gpio: zynq: Remove non driver model code
Michal Simek
- [U-Boot] [PATCH 4/7] gpio: zynq: Move the definitions to driver file
Michal Simek
- [U-Boot] [PATCH 5/7] gpio: zynqmp: Add GPIO driver support for ZynqMP
Michal Simek
- [U-Boot] [PATCH 6/7] zynqmp: Kconfig: Enable ZYNQ_GPIO for ZynqMP
Michal Simek
- [U-Boot] [PATCH 7/7] ARM64: zynqmp: Enable CMD_GPIO and DM_GPIO for ep108
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Enable pca953x driver for zcu102
Michal Simek
- [U-Boot] [PATCH] GPIO: pca953x: Remove compilation warnings on arm64
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [uboot] [PATCH v4 4/7] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [RFC 2/2] dm: i2c: Add driver for Cadence I2C IP
Michal Simek
- [U-Boot] [PATCH v2 1/2] i2c: Describe Cadence I2C devicetree bindings
Michal Simek
- [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
Michal Simek
- [U-Boot] [uboot] [PATCH v5 2/7] net: zynq_gem: Add the passing of the phy-handle node
Michal Simek
- [U-Boot] [uboot] [PATCH v5 4/7] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [uboot] [PATCH v5 5/7] net: phy: Move is_rgmii helper to phy.h
Michal Simek
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [RFC 2/2] dm: i2c: Add driver for Cadence I2C IP
Michal Simek
- [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH v2 2/2] dm: i2c: Add driver for Cadence I2C IP
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Use i2c cadence DM driver
Michal Simek
- [U-Boot] [GIT PULL] Xilinx changes
Michal Simek
- [U-Boot] [PATCH] fdt: Do not report bad cell count when #size-cells = <0>
Michal Simek
- [U-Boot] [PATCH] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH v2 2/2] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Michal Simek
- [U-Boot] [PATCH V2] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH 1/4] i2c: cdns: Read address from DT in ofdata_to_platdata
Michal Simek
- [U-Boot] [PATCH 2/4] i2c: cdns: Moving speed setup from probe to set_bus_speed function
Michal Simek
- [U-Boot] [PATCH 3/4] i2c: cdns: Support different bus speeds
Michal Simek
- [U-Boot] [PATCH 4/4] i2c: muxes: Add support for TI PCA954X mux
Michal Simek
- [U-Boot] [PATCH] fdt: Do not report bad cell count when #size-cells = <0>
Michal Simek
- [U-Boot] [PATCH V3] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH] dm: fdtdec: Check full path for alias
Michal Simek
- [U-Boot] [PATCH V4] dm: gpio: pca953x: introduce driver model support for pca953x
Michal Simek
- [U-Boot] [PATCH 3/4] i2c: cdns: Support different bus speeds
Michal Simek
- [U-Boot] test/py - test OS boot
Michal Simek
- [U-Boot] [PATCH] gpio: zynq: Add support for reading gpio pin state
Michal Simek
- [U-Boot] [PATCH] dm: fdtdec: Check full path for alias
Michal Simek
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Michal Simek
- [U-Boot] [PATCH v6 2/7] net: zynq_gem: Add the passing of the phy-handle node
Michal Simek
- [U-Boot] [PATCH] zynq: Allow board specific files to over write CONFIG_EXTRA_ENV_SETTINGS.
Michal Simek
- [U-Boot] [PATCH] ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
Michal Simek
- [U-Boot] [PATCH 4/4] i2c: muxes: Add support for TI PCA954X mux
Michal Simek
- [U-Boot] [PATCH v2] i2c: muxes: Add support for TI PCA954X mux
Michal Simek
- [U-Boot] [PATCH 1/2] ARM64: zynqmp: Enable HUSH parser for all zynqmp targets
Michal Simek
- [U-Boot] [PATCH 2/2] ARM64: zynqmp: Enable missing distro default options
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Add support for reading MAC from eeprom
Michal Simek
- [U-Boot] [PATCH 1/3] phy: Add phy driver support for xilinx PCS/PMA core
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Cleanup config file after CMD move
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Enable eMMC boot partitions commands
Michal Simek
- [U-Boot] [PATCH] kbuild: Do not append dtb for OF_EMBED case
Michal Simek
- [U-Boot] [PATCH] kbuild: Do not append dtb for OF_EMBED case
Michal Simek
- [U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Michal Simek
- [U-Boot] [PATCH v2] kbuild: Do not append dtb for OF_EMBED case
Michal Simek
- [U-Boot] [RFC PATCH] SPL: FIT: Align loading address for header
Michal Simek
- [U-Boot] [RFC PATCH] SPL: FIT: Enable SPL_FIT_LOAD in RAM based boot mode
Michal Simek
- [U-Boot] [RFC PATCH] SPL: FIT: Enable SPL_FIT_LOAD for sd bootmode for fat partions
Michal Simek
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Michal Simek
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Michal Simek
- [U-Boot] [PATCH v3 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Michal Simek
- [U-Boot] [PATCH v2 27/27] RFC: sunxi: Enable SPL FIT support
Michal Simek
- [U-Boot] [PATCH] ARm64: zynqmp: Remove CONFIG_PREBOOT
Michal Simek
- [U-Boot] [PATCH] ARM64: zynqmp: Enable SPI_FLASH and FLASH_BAR for ep108
Michal Simek
- [U-Boot] test/py - test OS boot
Michal Simek
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Saket Sinha
- [U-Boot] [PATCH] x86: qemu: Drop our own ACPI implementation
Saket Sinha
- [U-Boot] [RFC v1 PATCH 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [PATCH v2 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [PATCH v2 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [PATCH v1] tpm: Fix uclass_first_device error handling
Mario Six
- [U-Boot] [PATCH v2 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [PATCH v3 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [PATCH v2] tpm: Fix uclass_first_device error handling
Mario Six
- [U-Boot] [PATCH v3 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
Mario Six
- [U-Boot] [RFC PATCH] i2c/eeprom: Always define I2C_RXTX_LEN
Mario Six
- [U-Boot] [PATCH 0/9] dm: fsl_i2c: Make FSL I2C driver compatible with DM
Mario Six
- [U-Boot] [PATCH 1/9] dm: fsl_i2c: Rename I2C register structure
Mario Six
- [U-Boot] [PATCH 2/9] dm: fsl_i2c: Use clearer parameter names
Mario Six
- [U-Boot] [PATCH 3/9] dm: fsl_i2c: Reword and clarify comment
Mario Six
- [U-Boot] [PATCH 4/9] dm: fsl_i2c: Remove unnecessary variable
Mario Six
- [U-Boot] [PATCH 5/9] dm: fsl_i2c: Rename probe method
Mario Six
- [U-Boot] [PATCH 6/9] dm: fsl_i2c: Rename methods for reading/writing data
Mario Six
- [U-Boot] [PATCH 7/9] dm: fsl_i2c: Prepare compatibility functions
Mario Six
- [U-Boot] [PATCH 8/9] dm: fsl_i2c: Factor out adap parameter
Mario Six
- [U-Boot] [PATCH 9/9] dm: fsl_i2c: Enable DM for FSL I2C
Mario Six
- [U-Boot] [PATCH] dm: gpio: pca953x: Support PCA953X with 40 GPIOs
Mario Six
- [U-Boot] [PATCH 0/3] dm: gpio: Add driver for MPC85xx GPIO controller
Mario Six
- [U-Boot] [PATCH 1/3] dm: gpio: Add driver for MPC85XX GPIO controller
Mario Six
- [U-Boot] [PATCH 2/3] dm: gpio: Add methods for open drain setting
Mario Six
- [U-Boot] [PATCH 3/3] dm: gpio: Implement open drain for MPC85XX GPIO
Mario Six
- [U-Boot] [PATCH] gpio: mvebu_gpio: Add missing out value set to gpio_direction_output()
Kevin Smith
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
Wenbin Song
- [U-Boot] [PATCH] armv8/ls1043aqds modify CONFIG_SYS_MAX_FLASH_BANKS to 1
Wenbin Song
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
Wenbin Song
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
Wenbin Song
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
Wenbin Song
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
Wenbin Song
- [U-Boot] [PATCH v2] i2c: muxes: Add support for TI PCA954X mux
Ben Stoltz
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Heiko Stübner
- [U-Boot] [PATCH v2 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
York Sun
- [U-Boot] [PATCH v3] armv8: LS2080A: Consolidate LS2080A and LS2085A
York Sun
- [U-Boot] [PATCH v2 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
York Sun
- [U-Boot] [PATCH v4 0/1] Use LS2080A as the only SoC name
York Sun
- [U-Boot] [PATCH v4] armv8: LS2080A: Consolidate LS2080A and LS2085A
York Sun
- [U-Boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
York Sun
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
York Sun
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
York Sun
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
York Sun
- [U-Boot] [PATCH] mmc:fsl_esdhc: fix invalidate dcache scope
York Sun
- [U-Boot] [PATCH] armv8/ls1043a: Add MTD partition scheme
York Sun
- [U-Boot] [PATCH V3] fsl: esdhc: support driver model
York Sun
- [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure
York Sun
- [U-Boot] [PATCH] drivers: net: vsc9953: Do not configure disabled ports
York Sun
- [U-Boot] [PATCH] drivers: net: vsc9953: Fix bug when PVID is shown for disabled ports only
York Sun
- [U-Boot] [PATCH] armv8: ls1043aqds: make sure fixed-link property is big endian
York Sun
- [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute
York Sun
- [U-Boot] [PATCH] arm: Fix order of CSU indexes in ns_access.h
York Sun
- [U-Boot] [PATCH] armv8/ls1043aqds modify CONFIG_SYS_MAX_FLASH_BANKS to 1
York Sun
- [U-Boot] [PATCH 1/2] armv8: ls1043a: load Fman ucode from NAND flash under NAND boot
York Sun
- [U-Boot] [PATCH 2/2] armv8: ls1043a: load Fman ucode from SD/MMC under SD boot
York Sun
- [U-Boot] [PATCH v4] armv8: LS2080A: Consolidate LS2080A and LS2085A
York Sun
- [U-Boot] Please pull u-boot-fsl-qoriq master
York Sun
- [U-Boot] [PATCH v3 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
York Sun
- [U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
York Sun
- [U-Boot] [PATCH v3 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
York Sun
- [U-Boot] [PATCH] powerpc/t2080qds: Enable qixis commands to reboot from NAND and SD
York Sun
- [U-Boot] [PATCH 1/2] powerpc/t208xqds: Update MAINTAINERS file
York Sun
- [U-Boot] [PATCH 2/2] powerpc/t208xrdb: Update MAINTAINERS file
York Sun
- [U-Boot] [RFC PATCH] powerpc: Disable flush or invalidate dcache by range for some SoCs
York Sun
- [U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
York Sun
- [U-Boot] Please pull u-boot-mpc85xx master
York Sun
- [U-Boot] [PATCH] powerpc: t1040qds: Use generic ethsw commands
York Sun
- [U-Boot] [PATCH] powerpc: Replace CONFIG_SYS_INIT_RAM_END with CONFIG_SYS_INIT_RAM_SIZE
York Sun
- [U-Boot] [PATCH v3 1/1] mpc85xx: Enable pre-relocation malloc for MPC85xx
York Sun
- [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
York Sun
- [U-Boot] [PATCH] powerpc/mpc85xx: set L2PE in L2CSR0 before enabling L2 cache
York Sun
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
York Sun
- [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"
York Sun
- [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"
York Sun
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
York Sun
- [U-Boot] [PATCH] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Jagan Teki
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Jagan Teki
- [U-Boot] [PATCH v3] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Jagan Teki
- [U-Boot] [PATCH v3] spi: kirkwood_spi: Add support for multiple chip-selects on MVEBU
Jagan Teki
- [U-Boot] [PATCH] USB: g_dnl: Change device class
John Tobias
- [U-Boot] [PATCH] USB: g_dnl: Change device class
John Tobias
- [U-Boot] [PATCH] usb: ums - expose selected partition/s
John Tobias
- [U-Boot] [PATCH] usb: ums - expose selected partition/s v2
John Tobias
- [U-Boot] [PATCH] usb: ums - expose selected partition/s v2
John Tobias
- [U-Boot] [PATCH v3] usb: ums - expose selected partition/s
John Tobias
- [U-Boot] [U-BOOT] [RFC PATCH] EMAC driver for H3/A64
Amit Singh Tomar
- [U-Boot] u-boot hangs after enabling secured boot : gumstix-overo
Arun Kuttiyara Varghese
- [U-Boot] [PATCH] arm: socfpga: Nuke useless include
Marek Vasut
- [U-Boot] [PATCH V2] arm: socfpga: Nuke useless include
Marek Vasut
- [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling
Marek Vasut
- [U-Boot] [PATCH v8 1/9] mips: add base support for QCA/Atheros ath79 SOCs
Marek Vasut
- [U-Boot] [PATCH] usb: ehci-hcd: Fix crash when no ops are provided to ehci_register()
Marek Vasut
- [U-Boot] [PATCH] usb: kbd: Do not deregister usbkbd twice when using dm
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Drop space after 'loadaddr=' in extra env
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Drop space after 'loadaddr=' in extra env
Marek Vasut
- [U-Boot] [PATCH V2] arm: socfpga: Nuke useless include
Marek Vasut
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Marek Vasut
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix NAND image generation
Marek Vasut
- [U-Boot] [PATCH v6 3/4] drivers:usb:common:fsl-dt-fixup: Add device-tree fixup support for xhci controller
Marek Vasut
- [U-Boot] [PATCH v6 0/4] Make usb device-tree fixup independent of USB controller
Marek Vasut
- [U-Boot] [PATCH v1] Revert "fastboot: OUT transaction length must be aligned to wMaxPacketSize"
Marek Vasut
- [U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig
Marek Vasut
- [U-Boot] [PATCH 1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Problem with sf write on Arria 5.
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Marek Vasut
- [U-Boot] [U-Boot, 1/3] musb: sunxi: Do not allocate musb struct multiple times
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [U-Boot, 1/3] musb: sunxi: Do not allocate musb struct multiple times
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] SoCFPGA cache / S-bit problem - was Re: Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] [PATCH 01/10] ddr: altera: Replace ad-hoc constant with macro
Marek Vasut
- [U-Boot] [PATCH 02/10] ddr: altera: Tweak DQS tracking enable handling
Marek Vasut
- [U-Boot] [PATCH 03/10] ddr: altera: Fix scc_mgr_set() argument order
Marek Vasut
- [U-Boot] [PATCH 04/10] ddr: altera: Fix DRAM end value in protection rule
Marek Vasut
- [U-Boot] [PATCH 05/10] ddr: altera: Remove unnecessary update of the SCC
Marek Vasut
- [U-Boot] [PATCH 06/10] ddr: altera: Remove unnecessary ODT mode config
Marek Vasut
- [U-Boot] [PATCH 07/10] ddr: altera: Zero DM IN delay in scc_mgr_zero_group()
Marek Vasut
- [U-Boot] [PATCH 08/10] ddr: altera: Make DLEVEL behavior inclusive
Marek Vasut
- [U-Boot] [PATCH 09/10] ddr: altera: Staticize global variables
Marek Vasut
- [U-Boot] [PATCH 10/10] ddr: altera: Repair DQ window centering code
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Problem with sf write on Arria 5.
Marek Vasut
- [U-Boot] Problem with sf write on Arria 5.
Marek Vasut
- [U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Marek Vasut
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Marek Vasut
- [U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Marek Vasut
- [U-Boot] [PATCH] arc: Add virt_to_phys() stub
Marek Vasut
- [U-Boot] Problem with sf write on Arria 5.
Marek Vasut
- [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].
Marek Vasut
- [U-Boot] [PATCH v5 1/4] arm: add missing writes[bwql], reads[bwql].
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Marek Vasut
- [U-Boot] [PATCH v3 1/2] net: designware: fix descriptor layout and warnings on 64-bit archs
Marek Vasut
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Marek Vasut
- [U-Boot] [PATCH v8 6/9] drivers: serial: add serial driver for ar933x SOC
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: sr1500: Remove USB_GADGET
Marek Vasut
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Marek Vasut
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Marek Vasut
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Marek Vasut
- [U-Boot] [PATCH] dragonboard410c: Add CONFIG_SYS_CACHELINE_SIZE
Marek Vasut
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Marek Vasut
- [U-Boot] [PATCH] efi_loader: Always flush in cache line size granularity
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] FPGA detection failure on Cyclone V soc development kit
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH] m68k: fix broken buildman m68k
Marek Vasut
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Marek Vasut
- [U-Boot] Newbie SPL question for socfpga_sockit
Marek Vasut
- [U-Boot] [PATCH 1/1] drivers: usb: common: add common code for usb drivers to use
Marek Vasut
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Marek Vasut
- [U-Boot] [PATCH 0/4] Add support for Cadence QSPI on K2G
Marek Vasut
- [U-Boot] [PATCH 1/4] spi: cadence_qspi_apb: Support 32 bit AHB address
Marek Vasut
- [U-Boot] [PATCH 2/4] spi: cadence_quadspi: Enable QUAD mode based on DT data
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: clean up common config options
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: clean up common config options
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Marek Vasut
- [U-Boot] [PATCH v3 2/2] arm: add initial support for Amlogic Meson and ODROID-C2
Marek Vasut
- [U-Boot] [PATCH v2] mmc: add mmc partconf read capability
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] Unaligned flush_dcache_range in axs101.c
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Marek Vasut
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Marek Vasut
- [U-Boot] [PATCH v4 3/3] arm: meson: implement calls to secure monitor
Marek Vasut
- [U-Boot] [PATCH v4 1/3] net: designware: fix descriptor layout and warnings on 64-bit archs
Marek Vasut
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH 00/12] Introduce layout aware eeprom commands
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH 1/2] arm: socfpga: Fix typos in DT files (environmnet -> environment)
Marek Vasut
- [U-Boot] [PATCH 2/2] arm: socfpga: socrates: Add eth0 alias to enable ethernet
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH] ARM: atmel: Enable FIT image support for SAMA5Dx
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH] arm: dts: socfpga: fix DTC unit name warnings
Marek Vasut
- [U-Boot] [PATCH] arm: mx5: Fix NAND image generation
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] [PULL] u-boot-socfpga/master
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH] cmd/usb_mass_storage.c: Rework ums_init() ret logic slightly
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] EHCI timed out on TD - token=0x80008d80
Marek Vasut
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Marek Vasut
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Marek Vasut
- [U-Boot] [PATCH] travis: turn off dtc unit address warnings
Marek Vasut
- [U-Boot] EHCI timed out on TD - token=0x80008d80
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PATCH] ARM: sama5d2: Implement boot device autodetection
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] [GIT] Pull request: u-boot-dfu
Marek Vasut
- [U-Boot] [PULL] u-boot-usb/master
Marek Vasut
- [U-Boot] [PATCH v5 2/4] net: designware: fix descriptor layout and warnings on 64-bit archs
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Marek Vasut
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH 1/4] usb: dwc2: Pass private data into dwc_otg_core_init()
Marek Vasut
- [U-Boot] [PATCH 2/4] usb: dwc2: Pull Ext VBUS macro from dwc_otg_core_init()
Marek Vasut
- [U-Boot] [PATCH 3/4] usb: dwc2: Make OC protection configurable
Marek Vasut
- [U-Boot] [PATCH 4/4] ARM: socfpga: Disable USB OC protection on SoCrates
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Marek Vasut
- [U-Boot] [PATCH 1/2] mtd: cqspi: Simplify indirect write code
Marek Vasut
- [U-Boot] [PATCH 2/2] mtd: cqspi: Simplify indirect read code
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable STDIO deregistering on Novena
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH v5 4/4] usb: Change power-on / scanning timeout handling
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH V2] ARM: mx6: Enable MMC FS boot support on Wandboard
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH 1/5] arm: include: Import unified.h from Linux kernel
Marek Vasut
- [U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH] usb: dwc2: Init desc_before_addr
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support
Marek Vasut
- [U-Boot] [PATCH 1/3] SPL: Let spl_parse_image_header() return value
Marek Vasut
- [U-Boot] [PATCH 2/3] SPL: Add CONFIG_SPL_ABORT_ON_RAW_IMAGE
Marek Vasut
- [U-Boot] [PATCH 3/3] ARM: mx6: Enable MMC and SATA extfs boot support
Marek Vasut
- [U-Boot] Issue with USB mass storage (thumb drives)
Marek Vasut
- [U-Boot] [PATCH 1/2] mtd: cqspi: Simplify indirect write code
Marek Vasut
- [U-Boot] [PATCH] arm: mvebu: a38x: Weed out floating point use
Marek Vasut
- [U-Boot] [PATCH] arm: Treat arm946es as v5te
Marek Vasut
- [U-Boot] [PATCH] am33xx changed BOOT_DEVICE_SPI to correct value
Vogt, Christof
- [U-Boot] [RFC PATCH 0/2] spl: Add support to load FIT from Filesystem
Lokesh Vutla
- [U-Boot] [RFC PATCH 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
- [U-Boot] [RFC PATCH 2/2] spl: Support loading a FIT from FAT FS
Lokesh Vutla
- [U-Boot] [PATCH] am33xx changed BOOT_DEVICE_SPI to correct value
Lokesh Vutla
- [U-Boot] [PATCH 0/2] spl: Support loading a FIT from SPI
Lokesh Vutla
- [U-Boot] [PATCH 1/2] spl: Make sure destination address is dma aligned when loading fit
Lokesh Vutla
- [U-Boot] [PATCH 2/2] spl: Support loading a FIT from SPI
Lokesh Vutla
- [U-Boot] [PATCH] keystone2: move platform specific NAND configs to platform specific header
Lokesh Vutla
- [U-Boot] [PATCH v2 0/2] spl: Add support to load FIT from Filesystem
Lokesh Vutla
- [U-Boot] [PATCH v2 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
- [U-Boot] [PATCH v2 2/2] spl: Support loading a FIT from FAT FS
Lokesh Vutla
- [U-Boot] [PATCH] board: ti: am57xx: Update EMIF SDRAM 1 and 3 Timings
Lokesh Vutla
- [U-Boot] [PATCH] board: ti: am57xx: Add support for am572x idk in SPL
Lokesh Vutla
- [U-Boot] [PATCH] spl: mmc: raw: Try to load u-boot if Linux image is not found
Lokesh Vutla
- [U-Boot] [PATCH 0/2] spl: Support loading a FIT from NAND
Lokesh Vutla
- [U-Boot] [PATCH 1/2] mtd: nand: am335x: spl: Fix copying of image
Lokesh Vutla
- [U-Boot] [PATCH 2/2] spl: Support loading a FIT from NAND
Lokesh Vutla
- [U-Boot] [PATCH v2 0/2] configs: ks2: Move NAND configs to defconfigs
Lokesh Vutla
- [U-Boot] [PATCH v2 1/2] memory: Move TI_AEMIF config to KCONFIG
Lokesh Vutla
- [U-Boot] [PATCH v2 2/2] configs: ks2: move CMD_NAND to defconfigs
Lokesh Vutla
- [U-Boot] [PATCH] ARM: AM43xx: Fix BOOT_DEVICE_USB ID
Lokesh Vutla
- [U-Boot] [PATCH v2 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
- [U-Boot] [PATCH v3 0/2] spl: Add support to load FIT from Filesystem
Lokesh Vutla
- [U-Boot] [PATCH v3 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
- [U-Boot] [PATCH v3 2/2] spl: Support loading a FIT from FAT FS
Lokesh Vutla
- [U-Boot] [RFC PATCH 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
- [U-Boot] [PATCH 01/16] doc: Add info on using secure devices from TI
Lokesh Vutla
- [U-Boot] [PATCH 02/16] arm: am33xx: Kconfig: Add secure device definitions
Lokesh Vutla
- [U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Lokesh Vutla
- [U-Boot] [PATCH 04/16] ti: omap-common: Add Kconfig file for secure device support
Lokesh Vutla
- [U-Boot] [PATCH 05/16] ti: omap-common: Add commands for generating secure SPL images
Lokesh Vutla
- [U-Boot] [PATCH 06/16] ti: AM43xx: config.mk: Add support for generating secure boot images
Lokesh Vutla
- [U-Boot] [PATCH 07/16] ti: AM43xx: Use CONFIG options from SOC Kconfig
Lokesh Vutla
- [U-Boot] [PATCH 08/16] ti: AM43xx: board: Detect AM43xx HS EVM
Lokesh Vutla
- [U-Boot] [PATCH 09/16] defconfig: Add configs for AM43xx secure parts
Lokesh Vutla
- [U-Boot] [PATCH 10/16] ti_omap5_common: Update SPL start address on secure parts
Lokesh Vutla
- [U-Boot] [PATCH 11/16] spl: build: ti: add support for secure boot images
Lokesh Vutla
- [U-Boot] [PATCH 12/16] ARM: omap4/5: Add device type to CPU string
Lokesh Vutla
- [U-Boot] [PATCH 13/16] ARM: omap5: add hooks for cpu/SoC fdt fixups
Lokesh Vutla
- [U-Boot] [PATCH 14/16] ARM: omap5: add ft_board_setup for dra7xx/am57xx
Lokesh Vutla
- [U-Boot] [PATCH 15/16] ARM: omap5: Add config for board/cpu fdt fixups
Lokesh Vutla
- [U-Boot] [PATCH 16/16] defconfig: ti: Add configs for OMAP5-class secure parts
Lokesh Vutla
- [U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig
Lokesh Vutla
- [U-Boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Alison Wang
- [U-Boot] [PATCH] armv8: fsl-layerscape: Remove unnecessary flushing dcache
Alison Wang
- [U-Boot] [u-boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Huan Wang
- [U-Boot] [u-boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Huan Wang
- [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute
Huan Wang
- [U-Boot] [PATCH RESEND] armv8: LSCH2 early and final mmu needs matching NS attribute
Huan Wang
- [U-Boot] [PATCH v8 6/9] drivers: serial: add serial driver for ar933x SOC
Wills Wang
- [U-Boot] [PATCH 0/4] ath79: fix some minor defects
Wills Wang
- [U-Boot] [PATCH 1/4] ath79: spi: Remove the explicit pinctrl setting
Wills Wang
- [U-Boot] [PATCH 2/4] ar933x: serial: Remove the explicit pinctrl setting
Wills Wang
- [U-Boot] [PATCH 3/4] ath79: ar933x: use BIT macro for bit shift operation
Wills Wang
- [U-Boot] [PATCH 4/4] ath79: add readonly attribute for ath79_soc_desc
Wills Wang
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Stephen Warren
- [U-Boot] [PATCH V3 1/3] drivers: block: add block device cache
Stephen Warren
- [U-Boot] [PATCH 1/2] ARM: allow CONFIG_GICV* not to be defined
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: add Raspberry Pi 3 64-bit config
Stephen Warren
- [U-Boot] [PATCH] ARM: rpi: add some missing Kconfig help text
Stephen Warren
- [U-Boot] [PATCH] usb: gadget: Move CONFIG_USB_GADGET to Kconfig
Stephen Warren
- [U-Boot] [PATCH 2/2] ARM: add Raspberry Pi 3 64-bit config
Stephen Warren
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Stephen Warren
- [U-Boot] [PATCH] rpi: remove redundant board files
Stephen Warren
- [U-Boot] [PATCH] rpi: remove redundant board files
Stephen Warren
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Stephen Warren
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Stephen Warren
- [U-Boot] [PATCH] test/py: pass -v option when executing sandbox
Stephen Warren
- [U-Boot] [U-Boot,v4,15/21] spmi: Add sandbox test driver
Stephen Warren
- [U-Boot] travis build fails
Stephen Warren
- [U-Boot] [PATCH 2/3] cmd: blkcache: simplify sub-command handling
Stephen Warren
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Stephen Warren
- [U-Boot] [PATCH] spmi: Fix sandbox spmi driver memory corruption
Stephen Warren
- [U-Boot] [PATCH v2] test/py: Add support for loading image via tftp to specified location
Stephen Warren
- [U-Boot] [PATCH V2] rpi: remove redundant board files
Stephen Warren
- [U-Boot] [PATCH 1/8] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Stephen Warren
- [U-Boot] [PATCH 2/8] usb: gadget: Add CONFIG_USB_GADGET_DUALSPEED to Kconfig
Stephen Warren
- [U-Boot] [PATCH 7/7] gpio: tegra: remove flags parsing in xlate routine
Stephen Warren
- [U-Boot] [PATCH] test/py: README: link to example hook scripts
Stephen Warren
- [U-Boot] [PATCH] fdt: implement dev_get_addr_name()
Stephen Warren
- [U-Boot] [PATCH 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Stephen Warren
- [U-Boot] [PATCH 2/3] tests: py: dfu: Add functionality to set different u-boot's dfu env variable
Stephen Warren
- [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Stephen Warren
- [U-Boot] [PATCH 1/8 v2] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Stephen Warren
- [U-Boot] [PATCH 02/11] lib: fdtdec: fix size cell and address cell parse from DT
Stephen Warren
- [U-Boot] [PATCH] serial: add BCM283x mini UART driver
Stephen Warren
- [U-Boot] [PATCH] dm: gpio: handle GPIO_ACTIVE_LOW flag in DT
Stephen Warren
- [U-Boot] [PATCH] buildman: allow more incremental building
Stephen Warren
- [U-Boot] [PATCH V2] buildman: allow more incremental building
Stephen Warren
- [U-Boot] [PATCH 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Stephen Warren
- [U-Boot] [PATCH] buildman: allow more incremental building
Stephen Warren
- [U-Boot] [PATCH V2 1/6] dm: gpio: add a default gpio xlate routine
Stephen Warren
- [U-Boot] [PATCH 1/7 v3] usb: gadget: Move CONFIG_USB_GADGET_VBUS_DRAW to Kconfig
Stephen Warren
- [U-Boot] Custodian Repo for Broadcom (arm) boards
Stephen Warren
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Stephen Warren
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: enable GPU node by compatible value
Stephen Warren
- [U-Boot] [PATCH] gunzip.c: use block layer for writes
Stephen Warren
- [U-Boot] [PATCH 05/44] Allow iotrace byte access to use an address of any size
Stephen Warren
- [U-Boot] [PATCH 06/44] sandbox: Add string and 16-bit I/O functions
Stephen Warren
- [U-Boot] [PATCH 09/44] dm: scsi: Remove the forward declarations
Stephen Warren
- [U-Boot] [PATCH 10/44] dm: scsi: Fix up code style
Stephen Warren
- [U-Boot] [PATCH 15/44] dm: blk: Add a legacy block interface
Stephen Warren
- [U-Boot] [PATCH 16/44] dm: systemace: Add a legacy block interface
Stephen Warren
- [U-Boot] [PATCH 20/44] dm: mmc: Add an implementation of the 'devnum' functions
Stephen Warren
- [U-Boot] [PATCH 34/44] dm: ide: Add support for driver-model block devices
Stephen Warren
- [U-Boot] [PATCH 35/44] dm: sandbox: Enable IDE
Stephen Warren
- [U-Boot] [PATCH 40/44] dm: blk: Allow blk_create_device() to allocate the device number
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] efi_loader: Add distro boot script for removable media
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] efi_loader: Add distro boot script for removable media
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Stephen Warren
- [U-Boot] [PATCH 2/2] efi_loader: Fall back to fdtfile naming convention
Stephen Warren
- [U-Boot] [PATCH] serial: bcm283x_mu: make pending values more explicit
Stephen Warren
- [U-Boot] [PATCH] jetson-tk1: Set fdtfile environment variable
Stephen Warren
- [U-Boot] [PATCH] dm: fdtdec: Check full path for alias
Stephen Warren
- [U-Boot] [PATCH 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Stephen Warren
- [U-Boot] [PATCH v2 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Stephen Warren
- [U-Boot] [PATCH v2 1/2] efi_loader: Pass fdt address directly to bootefi cmd
Stephen Warren
- [U-Boot] [PATCH] arm64: add missing gic_init_secure_percpu for non multi-entry
Stephen Warren
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Stephen Warren
- [U-Boot] [PATCH] mips: fix DTC unit warnings
Stephen Warren
- [U-Boot] [PATCH] ARM: always perform per-CPU GIC init
Stephen Warren
- [U-Boot] [PATCH] ARM: rpi: fix 64-bit CONFIG_SYS_TEXT_BASE
Stephen Warren
- [U-Boot] [PATCH v2 1/3] tests: py: dfu: Add global variables to store dfu alt numbers for test and dummy files
Stephen Warren
- [U-Boot] [PATCH v2 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Stephen Warren
- [U-Boot] [PATCH 00/60] ARM: tegra: cleanup part 1
Stephen Warren
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 03/60] mmc: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 04/60] mmc: tegra: move public header to arch/arm/mach-tegra/include
Stephen Warren
- [U-Boot] [PATCH 05/60] pwm: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 06/60] i2c: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 07/60] usb: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 08/60] video: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 09/60] ARM: tegra: correct 64-bit DT unit addresses
Stephen Warren
- [U-Boot] [PATCH 10/60] ARM: tegra: sort DT /aliases entries
Stephen Warren
- [U-Boot] [PATCH 11/60] ARM: tegra: add DT alias for GPIO controller
Stephen Warren
- [U-Boot] [PATCH 12/60] gpio: tegra: remove duplicate define
Stephen Warren
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Stephen Warren
- [U-Boot] [PATCH 14/60] ARM: tegra: use DT bindings for GPIO naming
Stephen Warren
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Stephen Warren
- [U-Boot] [PATCH 16/60] ARM: tegra: migrate TEGRA_GPIO to Kconfig
Stephen Warren
- [U-Boot] [PATCH 17/60] ARM: tegra: move apb_misc.h
Stephen Warren
- [U-Boot] [PATCH 18/60] ARM: tegra: move fuse.h
Stephen Warren
- [U-Boot] [PATCH 19/60] ARM: tegra: move gpu.h
Stephen Warren
- [U-Boot] [PATCH 20/60] ARM: tegra: move pmc.h
Stephen Warren
- [U-Boot] [PATCH 21/60] ARM: tegra: move scu.h
Stephen Warren
- [U-Boot] [PATCH 22/60] ARM: tegra: move warmboot.h
Stephen Warren
- [U-Boot] [PATCH 23/60] ARM: tegra: move xusb-padctl.h to <mach/>
Stephen Warren
- [U-Boot] [PATCH 24/60] ARM: tegra: unify+move {board, sys_proto}.h to <mach/>
Stephen Warren
- [U-Boot] [PATCH 25/60] ARM: tegra: use consistently named include guards
Stephen Warren
- [U-Boot] [PATCH 26/60] ARM: tegra: delete unused headers
Stephen Warren
- [U-Boot] [PATCH 27/60] ARM: tegra: move emc.h
Stephen Warren
- [U-Boot] [PATCH 28/60] ARM: tegra: move sdram_param.h
Stephen Warren
- [U-Boot] [PATCH 29/60] ARM: tegra: move sysctr.h
Stephen Warren
- [U-Boot] [PATCH 30/60] ARM: tegra: remove pmu.h
Stephen Warren
- [U-Boot] [PATCH 31/60] ARM: tegra: move powergate.h to <mach/>
Stephen Warren
- [U-Boot] [PATCH 32/60] ARM: tegra: add SoC-specific include directory
Stephen Warren
- [U-Boot] [PATCH 33/60] ARM: tegra: fix bug in Tegra20 flow.h
Stephen Warren
- [U-Boot] [PATCH 34/60] ARM: tegra: move flow.h
Stephen Warren
- [U-Boot] [PATCH 35/60] nyan-big: remove direct MC register access
Stephen Warren
- [U-Boot] [PATCH 36/60] ARM: tegra: move mc.h
Stephen Warren
- [U-Boot] [PATCH 37/60] ARM: tegra: move SDIOCFG_DRV* to pinmux.h
Stephen Warren
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Stephen Warren
- [U-Boot] [PATCH 39/60] ARM: tegra: remove get_num_cpus()
Stephen Warren
- [U-Boot] [PATCH 40/60] ARM: tegra: remove gp_padctrl.h
Stephen Warren
- [U-Boot] [PATCH 41/60] ARM: tegra: remove tegra_get_sku_info()
Stephen Warren
- [U-Boot] [PATCH 42/60] ARM: tegra: move EMC code to tegra20/ directory
Stephen Warren
- [U-Boot] [PATCH 43/60] ARM: tegra: move PLLX configuration into SoC directories
Stephen Warren
- [U-Boot] [PATCH 44/60] ARM: tegra: remove tegra_get_chip_sku()
Stephen Warren
- [U-Boot] [PATCH 45/60] ARM: tegra: move custom pinmux.h to <mach/>
Stephen Warren
- [U-Boot] [PATCH 46/60] ARM: tegra: add pinmux APIs to replace funcmux
Stephen Warren
- [U-Boot] [PATCH 47/60] ARM: tegra: provide API for SPL code to init UART
Stephen Warren
- [U-Boot] [PATCH 48/60] ARM: tegra: lay groundwork for board hook cleanup
Stephen Warren
- [U-Boot] [PATCH 49/60] ARM: tegra: convert boards to new hooks
Stephen Warren
- [U-Boot] [PATCH 50/60] ARM: tegra: remove unused includes
Stephen Warren
- [U-Boot] [PATCH 51/60] ARM: tegra: move SPL-specific GPIO device to spl.c
Stephen Warren
- [U-Boot] [PATCH 52/60] ARM: tegra: convert pin_mux_*() to new hooks
Stephen Warren
- [U-Boot] [PATCH 53/60] tegra: keyboard: move pinmux setup to board files
Stephen Warren
- [U-Boot] [PATCH 54/60] video: tegra: move pinmux setup to board files
Stephen Warren
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Stephen Warren
- [U-Boot] [PATCH 56/60] ARM: tegra: remove funcmux API
Stephen Warren
- [U-Boot] [PATCH 57/60] ARM: tegra: don't access Boot Info Table from board code
Stephen Warren
- [U-Boot] [PATCH 58/60] ARM: tegra: clean up board include statements
Stephen Warren
- [U-Boot] [PATCH 59/60] ARM: tegra: unify+move tegra.h to mach-tegra/
Stephen Warren
- [U-Boot] [PATCH 60/60] ARM: tegra: move clock headers
Stephen Warren
- [U-Boot] [PATCH 1/2] dm: core: allow drivers to refuse to bind
Stephen Warren
- [U-Boot] [PATCH 2/2] video: tegra: refuse to bind to disabled dcs
Stephen Warren
- [U-Boot] [PATCH v2 3/3] tests: py: dfu: Provide functionality to set test and dummy files alt settings
Stephen Warren
- [U-Boot] [PATCH] pci: tegra: fix DM conversion issues on Tegra20
Stephen Warren
- [U-Boot] [PATCH 17/60] ARM: tegra: move apb_misc.h
Stephen Warren
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Stephen Warren
- [U-Boot] [RFC PATCH] gpio: add Tegra186 GPIO driver
Stephen Warren
- [U-Boot] [RFC PATCH] gpio: add Tegra186 GPIO driver
Stephen Warren
- [U-Boot] [RFC PATCH] net: rtl8169: allow multiple devices
Stephen Warren
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Stephen Warren
- [U-Boot] [PATCH v3 1/3] tests: py: dfu: Add variables to store dfu alt numbers for test and dummy files
Stephen Warren
- [U-Boot] [PATCH 15/60] gpio: tegra: header file split
Stephen Warren
- [U-Boot] [RESEND PATCH V3 1/6] dm: gpio: add a default gpio xlate routine
Stephen Warren
- [U-Boot] test/py - test OS boot
Stephen Warren
- [U-Boot] [PATCH 17/60] ARM: tegra: move apb_misc.h
Stephen Warren
- [U-Boot] [PATCH] ARM: tegra: import latest Jetson TK1 spreadsheet
Stephen Warren
- [U-Boot] DFU tests failing in test/py on Tegra
Stephen Warren
- [U-Boot] [GIT] Pull request: u-boot-dfu
Stephen Warren
- [U-Boot] [PATCH] dfu: ram: fix number base of RAM entity parameters
Stephen Warren
- [U-Boot] [PATCH 30/60] ARM: tegra: remove pmu.h
Stephen Warren
- [U-Boot] [PATCH V2] buildman: allow more incremental building
Stephen Warren
- [U-Boot] [RFC PATCH] net: rtl8169: allow multiple devices
Stephen Warren
- [U-Boot] [PATCH] sf: fix timebase data type in _wait_ready()
Stephen Warren
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Stephen Warren
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 05/60] pwm: tegra: move header file to driver directory
Stephen Warren
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Stephen Warren
- [U-Boot] [PATCH] malloc: improve memalign fragmentation fix
Stephen Warren
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Stephen Warren
- [U-Boot] [PATCH 01/60] ARM: tegra: remove unused definitions in headers
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Stephen Warren
- [U-Boot] [PATCH 02/60] mmc: tegra: move pad init into MMC driver
Stephen Warren
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Stephen Warren
- [U-Boot] [RFC PATCH] net: rtl8169: allow multiple devices
Stephen Warren
- [U-Boot] [RFC PATCH] net: rtl8169: allow multiple devices
Stephen Warren
- [U-Boot] [PATCH 13/60] ARM: tegra: sort some board file include directives
Stephen Warren
- [U-Boot] [PATCH] net: rtl8169: fix switching between adapters
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [RFC PATCH] gpio: add Tegra186 GPIO driver
Stephen Warren
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Stephen Warren
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Stephen Warren
- [U-Boot] [PATCH 55/60] i2c: tegra: move pinmux setup to board files
Stephen Warren
- [U-Boot] [PATCH] fs: ext4: fix symlink read function
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [PATCH] ARM: fix ifdefs in ARMv8 lowlevel_init()
Stephen Warren
- [U-Boot] [PATCH] fdt: fix dev_get_addr_name node offset
Stephen Warren
- [U-Boot] [PATCH] dm: allow setting driver_data before/during bind
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Stephen Warren
- [U-Boot] [RFC PATCH] dm: ensure device names are unique
Stephen Warren
- [U-Boot] [PATCH 38/60] ARM: tegra: remove tegra_get_chip()
Stephen Warren
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Richard Weinberger
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Richard Weinberger
- [U-Boot] [PATCH] mtd, ubi: set free_count to zero before walking through erase list
Richard Weinberger
- [U-Boot] Porting Linux's MTD/NAND changes into U-Boot
Richard Weinberger
- [U-Boot] ITEAD Board (A20) fails to communicate on boot unless UART is connected
Kevin Welsh
- [U-Boot] Unable to compile
Kevin Welsh
- [U-Boot] Unable to compile
Kevin Welsh
- [U-Boot] [PATCH 2/9] cmd: nand: abstract global variable usage for dm conversion
Scott Wood
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Scott Wood
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Scott Wood
- [U-Boot] [PATCH 4/9] drivers: nand: implement a NAND uclass
Scott Wood
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Scott Wood
- [U-Boot] [PATCH] MAINTAINERS: Update Scott Wood's email address
Scott Wood
- [U-Boot] [PATCH 5/9] drivers: nand: omap_gpmc: convert driver to adopt driver model
Scott Wood
- [U-Boot] [PATCH v2] kirkwood_nand: claim MPP pins on the fly
Scott Wood
- [U-Boot] [u-boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Scott Wood
- [U-Boot] [u-boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Scott Wood
- [U-Boot] [u-boot] [PATCH] arm: sleep: Get the entry point of kernel from SPARE4 register
Scott Wood
- [U-Boot] [PATCH 3/9] drivers: nand: Kconfig: add NAND as Kconfig option
Scott Wood
- [U-Boot] [PATCH 2/2] board/t4240rdb: some ethernet ports shouldn't be detected
Shaohui Xie
- [U-Boot] [PATCH] cmd: fdt: Use separate CMD_FDT Kconfig entry instead of OF_LIBFDT
Masahiro Yamada
- [U-Boot] [PATCH 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Masahiro Yamada
- [U-Boot] [PATCH] dm: core: device: set pinctrl state for pinctrl device
Masahiro Yamada
- [U-Boot] [PATCH] debug_uart: output CR along with LF
Masahiro Yamada
- [U-Boot] [PATCH v2 1/2] arm: Replace v7_maint_dcache_all(ARMV7_DCACHE_CLEAN_INVAL_ALL) with asm code
Masahiro Yamada
- [U-Boot] [PATCH] ARM: zynq: load u-boot.img whether CONFIG_OF_SEPARATE is defined or not
Masahiro Yamada
- [U-Boot] [PATCH] arm64: add missing gic_init_secure_percpu for non multi-entry
Masahiro Yamada
- [U-Boot] [PATCH] pinctrl: uniphier: fix NAND pin-mux setting for PH1-LD11/LD20
Masahiro Yamada
- [U-Boot] [PATCH] arm64: add missing gic_init_secure_percpu for non multi-entry
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: uniphier: move aliases node up to make fdtgrep happy
Masahiro Yamada
- [U-Boot] [PATCH] ARM: always perform per-CPU GIC init
Masahiro Yamada
- [U-Boot] [PATCH v3 00/11] ARM: uniphier: add ARMv8 SoCs support
Masahiro Yamada
- [U-Boot] [PATCH v3 01/11] pinctrl: uniphier: rename function/array names
Masahiro Yamada
- [U-Boot] [PATCH v3 02/11] pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20
Masahiro Yamada
- [U-Boot] [PATCH v3 03/11] ARM: uniphier: avoid unaligned access to DT on 64bit SoC
Masahiro Yamada
- [U-Boot] [PATCH v3 04/11] ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref board
Masahiro Yamada
- [U-Boot] [PATCH v3 05/11] ARM: dts: uniphier: move aliases node up to satisfy fdtgrep
Masahiro Yamada
- [U-Boot] [PATCH v3 06/11] ARM: uniphier: add sg_set_iectrl_range()
Masahiro Yamada
- [U-Boot] [PATCH v3 07/11] ARM: uniphier: add PH1-LD20 SoC support
Masahiro Yamada
- [U-Boot] [PATCH v3 08/11] ARM: uniphier: reserve the last 64 byte of SDRAM
Masahiro Yamada
- [U-Boot] [PATCH v3 09/11] ARM: dts: uniphier: add SD controller node for PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH v3 10/11] clk: uniphier: add Media I/O clock driver support for PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH v3 11/11] ARM: uniphier: increase image load speed from NOR device
Masahiro Yamada
- [U-Boot] [PATCH v4 00/13] ARM: uniphier: add ARMv8 SoCs support
Masahiro Yamada
- [U-Boot] [PATCH v4 01/13] pinctrl: uniphier: rename function/array names
Masahiro Yamada
- [U-Boot] [PATCH v4 02/13] pinctrl: uniphier: fix NAND and SD pin-mux settings for PH1-LD11/LD20
Masahiro Yamada
- [U-Boot] [PATCH v4 03/13] ARM: uniphier: avoid unaligned access to DT on 64bit SoC
Masahiro Yamada
- [U-Boot] [PATCH v4 04/13] ARM: dts: uniphier: use Ref Daughter board on PH1-LD20 Ref board
Masahiro Yamada
- [U-Boot] [PATCH v4 05/13] ARM: dts: uniphier: move aliases node up to satisfy fdtgrep
Masahiro Yamada
- [U-Boot] [PATCH v4 06/13] ARM: uniphier: add sg_set_iectrl_range()
Masahiro Yamada
- [U-Boot] [PATCH v4 07/13] ARM: uniphier: carry on booting for Unknown boot mode
Masahiro Yamada
- [U-Boot] [PATCH v4 08/13] ARM: uniphier: rework uniphier_set_fdt_file()
Masahiro Yamada
- [U-Boot] [PATCH v4 09/13] ARM: uniphier: add PH1-LD20 SoC support
Masahiro Yamada
- [U-Boot] [PATCH v4 10/13] ARM: uniphier: reserve the last 64 byte of SDRAM
Masahiro Yamada
- [U-Boot] [PATCH v4 11/13] ARM: dts: uniphier: add SD controller node for PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH v4 12/13] clk: uniphier: add Media I/O clock driver support for PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH v4 13/13] ARM: uniphier: increase image load speed from NOR device
Masahiro Yamada
- [U-Boot] [PATCH] mmc: sdhci: add const qualifier to the name of struct sdhci_host
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH v4 00/13] ARM: uniphier: add ARMv8 SoCs support
Masahiro Yamada
- [U-Boot] [PATCH] ARM: dts: zynq: describe SLCR as simple-mfd rather than simple-bus
Masahiro Yamada
- [U-Boot] [PATCH] ARM: uniphier: revive some commands lost by Kconfig re-sync
Masahiro Yamada
- [U-Boot] register polling from HUSH parser?
Masahiro Yamada
- [U-Boot] [PATCH] kbuild: Do not append dtb for OF_EMBED case
Masahiro Yamada
- [U-Boot] register polling from HUSH parser?
Masahiro Yamada
- [U-Boot] [PATCH] mmc: sdhci: increase default timeout and make it configurable
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: some fixes for U-Boot v2016.05
Masahiro Yamada
- [U-Boot] [PATCH 1/4] ARM: uniphier: fix boot mode table of PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH 2/4] ARM: uniphier: enable Peripherl clock to use UART in SPL
Masahiro Yamada
- [U-Boot] [PATCH 3/4] ARM: uniphier: allow to use System Bus for ROM boot mode of PH1-LD20
Masahiro Yamada
- [U-Boot] [PATCH 4/4] ARM: uniphier: move pin-mux code into pin_init function
Masahiro Yamada
- [U-Boot] [PATCH v2] kbuild: Do not append dtb for OF_EMBED case
Masahiro Yamada
- [U-Boot] [PATCH 0/4] ARM: uniphier: some fixes for U-Boot v2016.05
Masahiro Yamada
- [U-Boot] pull request: u-boot-uniphier/master
Masahiro Yamada
- [U-Boot] [PATCH] x86: Correct typo of Miao Yan's email address
Miao Yan
- [U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver
Wenyou Yang
- [U-Boot] [PATCH 1/2] pinctrl: at91-pio4: add pinctrl driver
Wenyou Yang
- [U-Boot] [PATCH 2/2] atmel: bring in at91 pio4 device tree file and bindings
Wenyou Yang
- [U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver
Yang, Wenyou
- [U-Boot] [PATCH] board: atmel: sama5d2_xplained: fix the missing pin config of SDMMC0
Wenyou Yang
- [U-Boot] [PATCH 0/3] ARM: at91: sama5d2_xplained: change SDHCI GCK's clock source to UPLL
Wenyou Yang
- [U-Boot] [PATCH 1/3] ARM: at91: clock: fix the GCK's clock source
Wenyou Yang
- [U-Boot] [PATCH 2/3] ARM: at91: clock: complete the GCK's clock sources
Wenyou Yang
- [U-Boot] [PATCH 3/3] board: sama5d2_xplained: change SDHCI GCK's clock source to UPLL
Wenyou Yang
- [U-Boot] [PATCH] gpio: atmel_pio4: rework to support driver model & DT
Wenyou Yang
- [U-Boot] [PATCH] mmc: atmel_sdhci: move to the driver model & DT
Wenyou Yang
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] [PATCH] dm: at91: Add driver model support for the spi driver
Wenyou Yang
- [U-Boot] [PATCH 0/2] ARM: AT91: add AT91 PIO4 pinctrl driver
Yang, Wenyou
- [U-Boot] SAMA5D2 xplained SD/eMMC boot
Yang, Wenyou
- [U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Stuart Yoder
- [U-Boot] [PATCH v2] armv8/ls2080a: configure PMU's PCTBENR to enable WDT
Stuart Yoder
- [U-Boot] [PATCH] Revert "T2080QDS/PCIe: Soft Reset PCIe on T2080QDS for down-training issue"
Qiang Zhao
- [U-Boot] Fail to flash latest u-boot to firefly-rk3288 emmc
jExc cHIHAA
- [U-Boot] mkimage needs fitImage
shr ch
- [U-Boot] [PATCH 1/2] board/t4240rdb: Disable the non-existent ethernet port on T4240RDB
ying.zhang at freescale.com
- [U-Boot] [PATCH 2/2] board/t4240rdb: some ethernet ports shouldn't be detected
ying.zhang at freescale.com
- [U-Boot] [PATCH 1/2 v2] powerpc:t4240rdb: Disable the non-existent ethernet port on T4240RDB
ying.zhang at freescale.com
- [U-Boot] [PATCH 2/2 v2] powerpc:t4240: MAC9 and MAC10 should not be identified as 1G interface in some case
ying.zhang at freescale.com
- [U-Boot] [PATCH v2 00/11] ARMv7: PSCI: add PSCI v1.0 support
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 01/11] ARM: PSCI: change PSCI function IDs base and offsets
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 02/11] ARM: PSCI: change PSCI related macros definition style
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 03/11] ARMv7: PSCI: update function psci_get_cpu_stack_top
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 04/11] ARMv7: PSCI: update the place of saving target PC
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 05/11] ARMv7: PSCI: add codes to save context ID for CPU_ON
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 06/11] ARMv7: PSCI: factor out reusable psci_cpu_on_common
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 07/11] ARMv7: PSCI: add PSCI v1.0 functions skeleton
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 08/11] ARMv7: PSCI: ls102xa: check target CPU ID before further operations
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 09/11] ARMv7: PSCI: ls102xa: check ALREADY_ON or ON_PENDING for CPU_ON
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 10/11] ARMv7: PSCI: ls102xa: add more PSCI v1.0 functions implemention
macro.wave.z at gmail.com
- [U-Boot] [PATCH v2 11/11] ARMv7: PSCI: ls102xa: move secure text section into OCRAM
macro.wave.z at gmail.com
- [U-Boot] [PATCH] armv8: ls1043ardb: invert irq pin polarity for AQR105 PHY
shh.xie at gmail.com
- [U-Boot] [PATCH] arm: rmobile: Add BLANCHE board support
masakazu.mochizuki.wd at hitachi.com
- [U-Boot] [PATCH 1/2 v3] powerpc:t4240rdb: Disable the non-existent ethernet ports on T4240RDB
ying.zhang22455 at nxp.com
- [U-Boot] [PATCH] ahci: flush dcache before issuing command
yuantian.tang at nxp.com
- [U-Boot] [PATCH] arm: socfpga: clean up common config options
dinguyen at opensource.altera.com
- [U-Boot] Fwd: Marvell Armada XP u-boot from uart
pani
- [U-Boot] U-boot Stand alone Program
karthik poojary
- [U-Boot] Error during U-boot
shubham sharma
- [U-Boot] same fail reported on two componet of DIMM , in Memtest
sun
- [U-Boot] same fail reported on two componet of DIMM , in Memtest
sun
- [U-Boot] [PATCH V2] fsl: esdhc: consolidate fsl_esdhc_cfg structure
york sun
- [U-Boot] [PATCH] arm: Fix SCFG ICID reg addresses
york sun
- [U-Boot] porting u-boot to zynq 7030
lipeng123 at tsinghua.edu.cn
- [U-Boot] [PATCH v2 00/11] ARMv7: PSCI: add PSCI v1.0 support
hb zhang
- [U-Boot] [PATCH v2 00/11] ARMv7: PSCI: add PSCI v1.0 support
hb zhang
Last message date:
Sat Apr 30 18:18:57 CEST 2016
Archived on: Sat Apr 30 18:19:19 CEST 2016
This archive was generated by
Pipermail 0.09 (Mailman edition).