[U-Boot] [PATCH v6 4/7] net: phy: ti: Allow the driver to be more configurable
Mugunthan V N
mugunthanvnm at ti.com
Thu Apr 21 08:00:34 CEST 2016
On Friday 15 April 2016 05:57 PM, Dan Murphy wrote:
> Not all devices use the same internal delay or fifo depth.
> Add the ability to set the internal delay for rx or tx and the
> fifo depth via the devicetree. If the value is not set in the
> devicetree then set the delay to the default.
>
> If devicetree is not used then use the default defines within the
> driver.
>
> Signed-off-by: Dan Murphy <dmurphy at ti.com>
Tested this on dra72 rev C evm
Tested-by: Mugunthan V N <mugunthanvnm at ti.com>
Regards
Mugutnhan V N
More information about the U-Boot
mailing list