[U-Boot] [GIT PULL] Xilinx changes
Michal Simek
monstr at monstr.eu
Mon Apr 4 20:31:06 CEST 2016
Hi Tom,
please pull these xilinx changes to your branch.
Thanks,
Michal
The following changes since commit 563d8d93585035fa2a0b20190c1008eb625432c4:
net: phy: Realtek RTL8211B/C PHY ID fix (2016-04-02 19:26:08 -0400)
are available in the git repository at:
git://www.denx.de/git/u-boot-microblaze.git master
for you to fetch changes up to 07654ba1e37e0de2ee3a5983ad510a8c2dd21035:
ARM64: zynqmp: Enable EFI partition support (2016-04-04 20:28:39 +0200)
----------------------------------------------------------------
Joe Hershberger (1):
Michal Simek (15):
ARM: zynq: Enable option to overwrite default variables
ARM: zynq: zybo: Enabling reading MAC address from EEPROM
ARM: zynq: Fix default ps7_init_gpl.c/h for ZYBO
microblaze: Read information about timer/interrupts from DT
microblaze: Remove !OF_CONTROL code for timer and interrupt
net: axi_emac: Report phy-node error message permanently
ARM64: zynqmp: Enable FAT write and EXT4 write for USB too
ARM64: zynqmp: Select SYS_CONFIG_NAME via Kconfig
ARM64: Move HUSH enabling from board file to defconfig
ARM64: zynqmp: Read RAM information from DT
ARM64: zynqmp: Simplify MAINTAINERS file to support more boards
block: Add support for Ceva sata
ARM: zynq: Enable FLASH_BAR for microzed and zybo
ARM: zynq: Add uEnv.txt support
ARM64: zynqmp: Enable EFI partition support
Siva Durga Prasad Paladugu (8):
phy: Add phy driver support for xilinx PCS/PMA core
net: zynq_gem: Add support for SGMII interface
zynq-common: Enable phy driver for Xilinx PCS/PMA core
net: xilinx_axi: Use interface type instead of zero
net: xilinx_axi: Clear Isolate bit if found during phy setup
net: zynq_gem: Return error incase of invalid phy address
net: phy: Add SGMII support for TI phy
net: zynq_gem: Add SGMII support for zynqMP
Soren Brinkmann (1):
ARM64: zynqmp: Decrease boot delay
arch/arm/cpu/armv8/zynqmp/Kconfig | 15 +-
arch/arm/mach-zynq/include/mach/sys_proto.h | 2 +
arch/microblaze/cpu/interrupts.c | 26 ++-
arch/microblaze/cpu/timer.c | 39 +++-
board/xilinx/microblaze-generic/xparameters.h | 11 --
board/xilinx/zynq/board.c | 13 ++
board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.c | 1581
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++------------------------
board/xilinx/zynq/zybo_hw_platform/ps7_init_gpl.h | 9 +-
board/xilinx/zynqmp/MAINTAINERS | 7 +-
board/xilinx/zynqmp/zynqmp.c | 125 +++++++++++++
configs/xilinx_zynqmp_ep_defconfig | 2 +
configs/zynq_microzed_defconfig | 1 +
configs/zynq_zybo_defconfig | 1 +
drivers/block/Makefile | 1 +
drivers/block/sata_ceva.c | 113 +++++++++++
drivers/net/phy/Makefile | 1 +
drivers/net/phy/phy.c | 3 +
drivers/net/phy/ti.c | 39 +++-
drivers/net/phy/xilinx_phy.c | 144 ++++++++++++++
drivers/net/xilinx_axi_emac.c | 24 ++-
drivers/net/zynq_gem.c | 59 ++++--
include/configs/microblaze-generic.h | 12 --
include/configs/xilinx_zynqmp.h | 18 +-
include/configs/xilinx_zynqmp_ep.h | 5 -
include/configs/zynq-common.h | 29 +++
include/configs/zynq_zybo.h | 3 +
include/phy.h | 1 +
27 files changed, 1964 insertions(+), 320 deletions(-)
create mode 100644 drivers/block/sata_ceva.c
create mode 100644 drivers/net/phy/xilinx_phy.c
--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 198 bytes
Desc: OpenPGP digital signature
URL: <http://lists.denx.de/pipermail/u-boot/attachments/20160404/80969306/attachment.sig>
More information about the U-Boot
mailing list