[U-Boot] [PATCH v2] fastboot: OUT transaction length must be aligned to wMaxPacketSize
Lukasz Majewski
l.majewski at samsung.com
Tue Apr 12 13:19:48 CEST 2016
Hi Tom, Mugunthan
> On Mon, Apr 11, 2016 at 05:04:56PM +0530, Mugunthan V N wrote:
> > On Friday 08 April 2016 12:10 AM, Marek Vasut wrote:
> > > On 04/07/2016 06:46 PM, Sam Protsenko wrote:
> > >> On Thu, Apr 7, 2016 at 10:36 AM, Lukasz Majewski
> > >> <l.majewski at samsung.com> wrote:
> > >>> Hi Steve,
> > >>>
> > >>>> No -- I do not believe that this issue is caused by different
> > >>>> fastboot (client) versions (the executable that runs on the
> > >>>> host computer - Linux, Windows, Mac, etc.)
> > >>>> I have personally attempted three (3) different versions, and
> > >>>> the results are consistent.
> > >>>>
> > >>>> And no I don't think that I "am the only hope at fixing this
> > >>>> proper" -- as you will see below,
> > >>>> this" issue" seems to be unique to the "TI platforms" (...
> > >>>> nobody else has stated they have an issue either way -- but I
> > >>>> don't think many use this feature ....)
> > >>>> So maybe someone with "TI platforms" could investigate this
> > >>>> more thoroughly...
> > >>>>
> > >>>> HISTORY:
> > >>>>
> > >>>> The U-Boot code, up to Feb 25, worked properly on my Broadcom
> > >>>> boards -- this code contains:
> > >>>> req->length = rx_bytes_expected();
> > >>>> if (req->length < ep->maxpacket)
> > >>>> req->length = ep->maxpacket;
> > >>>> which aligned the remaining "rx_bytes_expected" to be aligned
> > >>>> to the "ep->maxpacket" size.
> > >>>>
> > >>>> On Feb 25, there was a patch applied from
> > >>>> <dileep.katta at linaro.org> which forces the remaining
> > >>>> "rx_bytes_expected" to be aligned to the "wMaxPacketSize" size
> > >>>> -- this patch broke all Broadcom boards:
> > >>>> + if (rx_remain < maxpacket) {
> > >>>> + rx_remain = maxpacket;
> > >>>> + } else if (rx_remain % maxpacket != 0) {
> > >>>> + rem = rx_remain % maxpacket;
> > >>>> + rx_remain = rx_remain + (maxpacket - rem);
> > >>>> + }
> > >>>>
> > >>>> After attempting to unsuccessfully contact Dileep, I requested
> > >>>> that this patch be reverted -- because it broke my boards!
> > >>>> (see the other email thread).
> > >>>>
> > >>>> Sam Protsenko <semen.protsenko at linaro.org> has stated that
> > >>>> this Feb 25 change is required to make "fastboot work on TI
> > >>>> platforms".
> > >>>>
> > >>>> Thus,
> > >>>> - Broadcom boards require alignment to "ep->maxpacket" size
> > >>>> - TI platforms require alignment to "wMaxPacketSize" size
> > >>>> And we seem to be at a stale-mate.
> > >>>> Unfortunately, I do not know enough about the USB internals to
> > >>>> understand why this change breaks the Broadcom boards; or why
> > >>>> it _is_ required on the TI platforms....
> > >>>> ( Is there any debugging that can be turned on to validate
> > >>>> what is happening at the lower levels? )
> > >>>
> > >>> I can only speak about DWC2 (from Synopsis) embedded at Samsung
> > >>> boards. There are low level debugging registers (documented,
> > >>> but not supposed to be used at normal operation), which give
> > >>> you some impression regarding very low level events.
> > >>>
> > >>> DWC2 at Samsung is using those to work properly since we had
> > >>> some problems with dwc2 IP blocks implementation on early
> > >>> Samsung platforms :-). This approach works in u-boot up till
> > >>> now.
> > >>>
> > >>> Another option is to use JTAG debugger (like Lauterbach) to
> > >>> inspect state of this IP block.
> > >>>
> > >>>> ( Can anyone explain why "wMaxPacketSize" size would be
> > >>>> required? -- my limited understanding of endpoints makes me
> > >>>> think that "ep->maxpacket" size is actually the correct value!
> > >>>> )
> > >>>>
> > >>>> I asked Sam to submit a patch which conditionally applied the
> > >>>> alignment to "wMaxPacketSize" size change -- he stated that he
> > >>>> was too busy right now -- so I submitted this patch on his
> > >>>> behalf (although he still needs to add the Kconfig for the TI
> > >>>> platforms in order to make his boards work)....
> > >>>>
> > >>>> I suppose I could also propose a patch where the condition
> > >>>> _removes_ this feature (and define it on the Broadcom boards)
> > >>>> -- do we generally like "negated" conditionals?
> > >>>> +#ifndef
> > >>>> CONFIG_USB_GADGET_FASTBOOT_DOWNLOAD_DISABLE_ALIGNMENT_WITH_WMAXPACKETSIZE
> > >>>> Please advise!
> > >>>>
> > >>>> Further, how does the U-Boot community respond to a change
> > >>>> which breaks something which is already working? Doesn't the
> > >>>> "author" of that change bear any responsibility on assisting
> > >>>> to get "their" change working properly with "all" the existing
> > >>>> boards?
> > >>>
> > >>> As we know the author of this change is not working at Linaro
> > >>> anymore.
> > >>>
> > >>>> I'm getting the
> > >>>> impression that "because the current code works for me", that
> > >>>> I am not getting any assistance in resolving this issue --
> > >>>> which is why I suggested "reverting" this change back to the
> > >>>> original code; that way, it would (politely?) force someone
> > >>>> interested in "TI platforms" to step up and look into this....
> > >>>>
> > >>>> Sorry for asking so many questions in one email -- but I'd
> > >>>> appreciate answers....
> > >>>> ( I also apologize in advance for the "attitude" which is
> > >>>> leaking into this email... )
> > >>>> Please tell me what I can do! I had working boards; now they
> > >>>> are all broken -- and I don't how how to get them working
> > >>>> again....
> > >>>
> > >>> If you don't have enough time (and HW) for investigate the
> > >>> issue, I think that Kconfig option with documentation entry is
> > >>> the way to go.
> > >>>
> > >>> I hope that Sam don't have any objections with such approach.
> > >>>
> > >>
> > >> If this commit doesn't break any platform -- I'm ok with that.
> > >> If it breaks anything (TI boards particularly) -- I'd ask to
> > >> revert it at once, as this is I believe not right way to do
> > >> things.
> > >>
> > >> So Steve, please add
> > >> CONFIG_USB_GADGET_FASTBOOT_DOWNLOAD_ALIGNMENT_REQUIRED option to
> > >> all required defconfigs (except yours), so that your patch only
> > >> fixes your platforms, but doesn't break any other platform at
> > >> the same time. Also good thing to do after that is check options
> > >> order in changed defconfigs with "make savedefconfig" rule. Both
> > >> your current changes and appropriate lines in defconfigs should
> > >> be committed as a single patch, so that it doesn't break
> > >> anything and "git bisect" may be used to look for regressions.
> > >> Also, really nice thing to do after all of this, is to use
> > >> "./tools/buildman/buildman" tool to check all ARM boards for
> > >> regressions after your patch (you should see that only your
> > >> boards were changed).
> > >>
> > >> Ideally, we should check it on all boards (or at least on all UDC
> > >> controllers supported in U-Boot) and figure out what is happening
> > >> exactly. But I'm totally fine with hack if it fixes real problem
> > >> on some platforms. I just ask you guys to not break anything
> > >> else at the same time (although it surely takes much more
> > >> effort, but still).
> > >
> > > I am totally not fine with hack, so please fix it such that both
> > > platforms work without added config option. Thanks
> > >
> >
> > The issue is already solved in Kernel with the patch [1]. May we can
> > take a similar approach and fix the issue without having config
> > options.
> >
> > [1]:
> > https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=0b2d2bbade59ab2067f326d6dbc2628bee227fd5
>
> This seems reasonable. Can you do this, along with a follow-up patch
> that sets it for DWC3? Thanks!
If I can add my two cents.
I believe that it would be worth to add some explanation into at least
the commit message (like very short excerpt from respective User Manual
or at least chapter number for further reference).
>
--
Best regards,
Lukasz Majewski
Samsung R&D Institute Poland (SRPOL) | Linux Platform Group
More information about the U-Boot
mailing list