[U-Boot] Issue with USB mass storage (thumb drives)

[Marek Vasut]

On 04/28/2016 03:04 PM, Diego wrote:
> In data mercoledì 27 aprile 2016 18:13:51, Marek Vasut ha scritto:
>>
>> OK, I have to two identical sticks and neither has the same USB ID as
>> yours. Can you do lsusb -vvv -d 0951:1689 ?
> 
> Hi Marek,
> 
> thanks for taking the time to look into this.
> Here you are:
> # lsusb -vvv -d 0951:1689
> 
> Bus 003 Device 020: ID 0951:1689 Kingston Technology DataTraveler SE9
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass            0 
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   idVendor           0x0951 Kingston Technology
>   idProduct          0x1689 DataTraveler SE9
>   bcdDevice            1.00
>   iManufacturer           1 Kingston
>   iProduct                2 DataTraveler SE9
>   iSerial                 3 0019E06B084BFD10470133E8
>   bNumConfigurations      1
>   Configuration Descriptor:
>     bLength                 9
>     bDescriptorType         2
>     wTotalLength           32
>     bNumInterfaces          1
>     bConfigurationValue     1
>     iConfiguration          0 
>     bmAttributes         0x80
>       (Bus Powered)
>     MaxPower              100mA
>     Interface Descriptor:
>       bLength                 9
>       bDescriptorType         4
>       bInterfaceNumber        0
>       bAlternateSetting       0
>       bNumEndpoints           2
>       bInterfaceClass         8 Mass Storage
>       bInterfaceSubClass      6 SCSI
>       bInterfaceProtocol     80 Bulk-Only
>       iInterface              0 
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x81  EP 1 IN
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval             255
>       Endpoint Descriptor:
>         bLength                 7
>         bDescriptorType         5
>         bEndpointAddress     0x02  EP 2 OUT
>         bmAttributes            2
>           Transfer Type            Bulk
>           Synch Type               None
>           Usage Type               Data
>         wMaxPacketSize     0x0200  1x 512 bytes
>         bInterval             255
> Device Qualifier (for other device speed):
>   bLength                10
>   bDescriptorType         6
>   bcdUSB               2.00
>   bDeviceClass            0 
>   bDeviceSubClass         0 
>   bDeviceProtocol         0 
>   bMaxPacketSize0        64
>   bNumConfigurations      1
> can't get debug descriptor: Resource temporarily unavailable
> Device Status:     0x0000
>   (Bus Powered)

Urgh, so you seem to have third revision of this stick. I have two
sticks which are exactly the same and work in U-Boot on MX6 wandboard:

=> usb reset
resetting USB...
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
=> usb info
1: Hub,  USB Revision 2.0
 - u-boot EHCI Host Controller
 - Class: Hub
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Mass Storage,  USB Revision 2.0
 - Kingston DataTraveler 2.0 C86000BDB6FFB0201A35968E
 - Class: (from Interface) Mass Storage
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0930  Product 0x6545 Version 1.16
   Configuration: 1
   - Interfaces: 1 Bus Powered 300mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 2
     - Class Mass Storage, Transp. SCSI, Bulk only
     - Endpoint 1 In Bulk MaxPacket 512
     - Endpoint 2 Out Bulk MaxPacket 512

=> usb reset
resetting USB...
EHCI failed to shut down host controller.
USB0:   Port not available.
USB1:   USB EHCI 1.00
scanning bus 1 for devices... 2 USB Device(s) found
       scanning usb for storage devices... 1 Storage Device(s) found
=> usb info
1: Hub,  USB Revision 2.0
 - u-boot EHCI Host Controller
 - Class: Hub
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0000  Product 0x0000 Version 1.0
   Configuration: 1
   - Interfaces: 1 Self Powered 0mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 1
     - Class Hub
     - Endpoint 1 In Interrupt MaxPacket 8 Interval 255ms

2: Mass Storage,  USB Revision 2.0
 - Kingston DataTraveler 2.0 001A4D5F1A5C1010B9445765
 - Class: (from Interface) Mass Storage
 - PacketSize: 64  Configurations: 1
 - Vendor: 0x0951  Product 0x1665 Version 2.0
   Configuration: 1
   - Interfaces: 1 Bus Powered 100mA
     Interface: 0
     - Alternate Setting 0, Endpoints: 2
     - Class Mass Storage, Transp. SCSI, Bulk only
     - Endpoint 1 In Bulk MaxPacket 512
     - Endpoint 2 Out Bulk MaxPacket 512

-- 
Best regards,
Marek Vasut