[U-Boot] [PATCH 1/2] fastboot: Fix wMaxPacketSize for High-Speed IN endpoint
Steve Rae
steve.rae at broadcom.com
Wed Apr 13 04:18:00 CEST 2016
oops -- my last reply was interpreted as a new patch:
http://patchwork.ozlabs.org/patch/609843/
so I'll try again:
Tested-by: Steve Rae <srae at broadcom.com>
[Test HW: bcm235xx board]
On Tue, Apr 12, 2016 at 5:51 AM, Roger Quadros <rogerq at ti.com> wrote:
> wMaxPacketSize for IN endpoing in High-Speed must be 512 and not 64.
> While fixing that we do some clean ups like
>
> - use cpu_to_le16(decimal_length) instead of hexadecimal length.
> - No need to initialize bInterval to 0. Static variables are 0 initialized.
> - Move descriptor setting from fastboot_add to to fastboot_bind.
> - check for dual speed configuration before setting the high speed descriptors.
>
> Signed-off-by: Roger Quadros <rogerq at ti.com>
> ---
> drivers/usb/gadget/f_fastboot.c | 36 +++++++++++++++++++++++++++---------
> 1 file changed, 27 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/usb/gadget/f_fastboot.c b/drivers/usb/gadget/f_fastboot.c
> index 2e87fee..e1038ea 100644
> --- a/drivers/usb/gadget/f_fastboot.c
> +++ b/drivers/usb/gadget/f_fastboot.c
> @@ -64,8 +64,7 @@ static struct usb_endpoint_descriptor fs_ep_in = {
> .bDescriptorType = USB_DT_ENDPOINT,
> .bEndpointAddress = USB_DIR_IN,
> .bmAttributes = USB_ENDPOINT_XFER_BULK,
> - .wMaxPacketSize = TX_ENDPOINT_MAXIMUM_PACKET_SIZE,
> - .bInterval = 0x00,
> + .wMaxPacketSize = cpu_to_le16(64),
> };
>
> static struct usb_endpoint_descriptor fs_ep_out = {
> @@ -73,8 +72,15 @@ static struct usb_endpoint_descriptor fs_ep_out = {
> .bDescriptorType = USB_DT_ENDPOINT,
> .bEndpointAddress = USB_DIR_OUT,
> .bmAttributes = USB_ENDPOINT_XFER_BULK,
> - .wMaxPacketSize = RX_ENDPOINT_MAXIMUM_PACKET_SIZE_1_1,
> - .bInterval = 0x00,
> + .wMaxPacketSize = cpu_to_le16(64),
> +};
> +
> +static struct usb_endpoint_descriptor hs_ep_in = {
> + .bLength = USB_DT_ENDPOINT_SIZE,
> + .bDescriptorType = USB_DT_ENDPOINT,
> + .bEndpointAddress = USB_DIR_IN,
> + .bmAttributes = USB_ENDPOINT_XFER_BULK,
> + .wMaxPacketSize = cpu_to_le16(512),
> };
>
> static struct usb_endpoint_descriptor hs_ep_out = {
> @@ -82,8 +88,7 @@ static struct usb_endpoint_descriptor hs_ep_out = {
> .bDescriptorType = USB_DT_ENDPOINT,
> .bEndpointAddress = USB_DIR_OUT,
> .bmAttributes = USB_ENDPOINT_XFER_BULK,
> - .wMaxPacketSize = RX_ENDPOINT_MAXIMUM_PACKET_SIZE_2_0,
> - .bInterval = 0x00,
> + .wMaxPacketSize = cpu_to_le16(512),
> };
>
> static struct usb_interface_descriptor interface_desc = {
> @@ -97,9 +102,15 @@ static struct usb_interface_descriptor interface_desc = {
> .bInterfaceProtocol = FASTBOOT_INTERFACE_PROTOCOL,
> };
>
> -static struct usb_descriptor_header *fb_runtime_descs[] = {
> +static struct usb_descriptor_header *fb_fs_function[] = {
> (struct usb_descriptor_header *)&interface_desc,
> (struct usb_descriptor_header *)&fs_ep_in,
> + (struct usb_descriptor_header *)&fs_ep_out,
> +};
> +
> +static struct usb_descriptor_header *fb_hs_function[] = {
> + (struct usb_descriptor_header *)&interface_desc,
> + (struct usb_descriptor_header *)&hs_ep_in,
> (struct usb_descriptor_header *)&hs_ep_out,
> NULL,
> };
> @@ -177,7 +188,15 @@ static int fastboot_bind(struct usb_configuration *c, struct usb_function *f)
> return -ENODEV;
> f_fb->out_ep->driver_data = c->cdev;
>
> - hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
> + f->descriptors = fb_fs_function;
> +
> + if (gadget_is_dualspeed(gadget)) {
> + /* Assume endpoint addresses are the same for both speeds */
> + hs_ep_in.bEndpointAddress = fs_ep_in.bEndpointAddress;
> + hs_ep_out.bEndpointAddress = fs_ep_out.bEndpointAddress;
> + /* copy HS descriptors */
> + f->hs_descriptors = fb_hs_function;
> + }
>
> s = getenv("serial#");
> if (s)
> @@ -302,7 +321,6 @@ static int fastboot_add(struct usb_configuration *c)
> }
>
> f_fb->usb_function.name = "f_fastboot";
> - f_fb->usb_function.hs_descriptors = fb_runtime_descs;
> f_fb->usb_function.bind = fastboot_bind;
> f_fb->usb_function.unbind = fastboot_unbind;
> f_fb->usb_function.set_alt = fastboot_set_alt;
> --
> 2.5.0
>
More information about the U-Boot
mailing list