[U-Boot] u-boot hangs after enabling secured boot : gumstix-overo
Arun Kuttiyara Varghese
arunkuttiyara at gmail.com
Thu Apr 28 22:48:12 CEST 2016
Hi All,
I was trying to enable the secured boot in u-boot for gumstix overo storm.
based on http://www.denx-cs.de/doku/?q=m28verifiedboot
After I prepared by SD cards, u-boot is not able to boot
and gives the below error message.
U-Boot SPL 2015.07 (Apr 28 2016 - 13:53:06)
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
reading u-boot.img
spl_load_image_fat: error reading image u-boot.img, err - -1
SPL: Please implement spl_start_uboot() for your board
SPL: Direct Linux boot not active!
Failed to mount ext2 filesystem...
spl_load_image_ext: ext4fs mount err - 0
================
This is the u-boot.dts file that I am using.
/dts-v1/;
/ {
model = "Keys";
signature {
key-dev {
required = "conf";
algo = "sha1,rsa2048";
key-name-hint = "my_key";
};
};
};
compilation using :
dtc -p 0x1000 /work/u-boot.dts -O dtb -o /work/u-boot.dtb
And these are the conf that I have added to include/configs/omap3_overo.h
#define CONFIG_OF_CONTROL
#define CONFIG_OF_SEPARATE
#define CONFIG_FIT
#define CONFIG_FIT_SIGNATURE
#define CONFIG_RSA
#define CONFIG_FIT_VERBOSE
and I am compiling u-boot by using below line :
make ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- EXT_DTB=/work/u-boot.dtb all
-j4
Please let me know if you have any ideas on how to debug this issue.
Thanks & Regards,
Arun
More information about the U-Boot
mailing list