[U-Boot] [uboot] [PATCH 7/7] net: phy: dp83867: Add SGMII helper for configuration
Dan Murphy
dmurphy at ti.com
Fri Apr 8 18:08:27 CEST 2016
The code assumed that if the interface is not RGMII configured
then it must be SGMII configured. This device has the ability
to support most of the MII interfaces. Therefore add the
helper for SGMII and only configure the device if the interface is
configured for SGMII.
Signed-off-by: Dan Murphy <dmurphy at ti.com>
---
drivers/net/phy/ti.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
index d503eef..4402c52 100644
--- a/drivers/net/phy/ti.c
+++ b/drivers/net/phy/ti.c
@@ -219,7 +219,7 @@ static int dp83867_config(struct phy_device *phydev)
(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
if (ret)
goto err_out;
- } else {
+ } else if (phy_interface_is_sgmii(phydev)) {
phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
(BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
--
2.8.0.rc3
More information about the U-Boot
mailing list