[U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT

[Stefano Babic]

On 26/04/2016 17:58, Fabio Estevam wrote:
> Tom/Stefano,
> 
> On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam <festevam at gmail.com> wrote:
>> From: Fabio Estevam <fabio.estevam at nxp.com>
>>
>> mx6ul_evk does not come with a eMMC populated, so we should not
>> define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able
>> to boot some brands of SD cards, such as SanDisk microSD HC - 8GB:
>>
>> U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11)
>> Trying to boot from MMC1
>> spl: mmc block read error
>> SPL: failed to boot from all boot devices
>> ### ERROR ### Please RESET the board ###
>>
>> When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns
>> MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot
>> via SD card.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
> 
> Could this one be applied for 2016.05?

I pick it up

Stefano


-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================