[U-Boot] [PATCH v2] mx6ul_evk: Remove CONFIG_SUPPORT_EMMC_BOOT

[Stefano Babic]

Hi Tom,

On 26/04/2016 18:04, Tom Rini wrote:
> On Tue, Apr 26, 2016 at 12:58:05PM -0300, Fabio Estevam wrote:
>> Tom/Stefano,
>>
>> On Wed, Apr 20, 2016 at 10:48 PM, Fabio Estevam <festevam at gmail.com> wrote:
>>> From: Fabio Estevam <fabio.estevam at nxp.com>
>>>
>>> mx6ul_evk does not come with a eMMC populated, so we should not
>>> define CONFIG_SUPPORT_EMMC_BOOT as it causes SPL to not be able
>>> to boot some brands of SD cards, such as SanDisk microSD HC - 8GB:
>>>
>>> U-Boot SPL 2016.05-rc1-28384-g108f841 (Apr 19 2016 - 11:19:11)
>>> Trying to boot from MMC1
>>> spl: mmc block read error
>>> SPL: failed to boot from all boot devices
>>> ### ERROR ### Please RESET the board ###
>>>
>>> When CONFIG_SUPPORT_EMMC_BOOT is defined spl_boot_mode() returns
>>> MMCSD_MODE_EMMCBOOT, so remove this option to have a reliable boot
>>> via SD card.
>>>
>>> Signed-off-by: Fabio Estevam <fabio.estevam at nxp.com>
>>
>> Could this one be applied for 2016.05?
> 
> Fine with me.  Do you want to make a PR or should I take it Stefano, if
> you have no objections?

Fine with me if you want to pick it up directly without PR.

Stefano

-- 
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: sbabic at denx.de
=====================================================================