[U-Boot] Newbie SPL question for socfpga_sockit

[Marek Vasut]

On 04/08/2016 07:16 AM, Stefan Roese wrote:
> On 08.04.2016 01:51, George Broz wrote:
> 
> <snip>
> 
>>>>> Try with the attached patch (and probably with dcache off)
>>>>
>>>> The patch applied cleanly. The behavior is unchanged with both
>>>> dcache on and off. The "good" sticks still work, and "bad" sticks still don't.
>>>
>>> OK. Then I should probably go hunting for Kingston DataTraveler SE9,
>>> right ? Can you give me a link to the stick you have, so I know what
>>> crappy device to look for ? Thanks!
>>
>> Here it is [1] - I have the 8GB version.
>>
>> I think there will always be crappy sticks that don't work... but do you
>> have any advice as to what properties will/might generally cause a problem?
>>
>> [1] http://www.amazon.com/Kingston-Digital-DataTraveler-DTSE9H-16GBZET/dp/B00DYQYITG
> 
> I have exactly this stick here (16GiB) version. And it is detected just
> fine in both, current mainline Armada XP (theadorable) and x86 boards
> (conga-qeval20-qa3-e3845). Here my lsusb output:

I bought the kingston stick and it's not detected on SoCFPGA SoCkit at
all. Ouch :-(

[...]
Best regards,
Marek Vasut