[U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks

[Marek Vasut]

On 04/06/2016 07:20 AM, Steve Rae wrote:
> 
> On Apr 5, 2016 3:08 PM, "Marek Vasut" <marex at denx.de
> <mailto:marex at denx.de>> wrote:
>>
>> On 04/04/2016 10:30 PM, Steve Rae wrote:
>> > Hi Marek,
>> >
>> > On Mon, Apr 4, 2016 at 1:02 PM, Marek Vasut <marex at denx.de
> <mailto:marex at denx.de>> wrote:
>> >>
>> >> On 04/04/2016 09:59 PM, Steve Rae wrote:
>> >>> Turn on the USB OTG clocks.
>> >>>
>> >>> Signed-off-by: Steve Rae <srae at broadcom.com
> <mailto:srae at broadcom.com>>
>> >>> ---
>> >>>
>> >>>  drivers/usb/gadget/bcm_udc_otg_phy.c | 4 ++++
>> >>>  1 file changed, 4 insertions(+)
>> >>>
>> >>> diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c
> b/drivers/usb/gadget/bcm_udc_otg_phy.c
>> >>> index 10b2e13..877f162 100644
>> >>> --- a/drivers/usb/gadget/bcm_udc_otg_phy.c
>> >>> +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c
>> >>> @@ -8,12 +8,16 @@
>> >>>  #include <common.h>
>> >>>  #include <asm/io.h>
>> >>>  #include <asm/arch/sysmap.h>
>> >>> +#include <asm/kona-common/clk.h>
>> >>>
>> >>>  #include "dwc2_udc_otg_priv.h"
>> >>>  #include "bcm_udc_otg.h"
>> >>>
>> >>>  void otg_phy_init(struct dwc2_udc *dev)
>> >>>  {
>> >>> +     /* turn on the USB OTG clocks */
>> >>> +     clk_usb_otg_enable((void *)HSOTG_BASE_ADDR);
>> >>
>> >> I _think_ this driver is used on RPi too, did you compile test it
> there?
>> >
>> > no, it is not - the only place this is used is:
>> >     drivers/usb/gadget/Makefile:obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY)
>> > += bcm_udc_otg_phy.o
>> >     include/configs/bcm28155_ap.h:#define
> CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
>>
>> Got it, thanks for checking.
>>
>> Do you want me to pick this up via u-boot-usb or shall this go via some
>> other tree as a series ?
>>
> I don't have any preference - what is the best way to get my outstanding
> patches applied?

Since the other two patches are quite unrelated, I will just pick this
one and let the bcm maintainer pick the rest.

Best regards,
Marek Vasut