[U-Boot] [PATCH 1/3] usb: bcm_udc_otg: enable clocks
Steve Rae
steve.rae at broadcom.com
Wed Apr 6 07:20:20 CEST 2016
On Apr 5, 2016 3:08 PM, "Marek Vasut" <marex at denx.de> wrote:
>
> On 04/04/2016 10:30 PM, Steve Rae wrote:
> > Hi Marek,
> >
> > On Mon, Apr 4, 2016 at 1:02 PM, Marek Vasut <marex at denx.de> wrote:
> >>
> >> On 04/04/2016 09:59 PM, Steve Rae wrote:
> >>> Turn on the USB OTG clocks.
> >>>
> >>> Signed-off-by: Steve Rae <srae at broadcom.com>
> >>> ---
> >>>
> >>> drivers/usb/gadget/bcm_udc_otg_phy.c | 4 ++++
> >>> 1 file changed, 4 insertions(+)
> >>>
> >>> diff --git a/drivers/usb/gadget/bcm_udc_otg_phy.c
b/drivers/usb/gadget/bcm_udc_otg_phy.c
> >>> index 10b2e13..877f162 100644
> >>> --- a/drivers/usb/gadget/bcm_udc_otg_phy.c
> >>> +++ b/drivers/usb/gadget/bcm_udc_otg_phy.c
> >>> @@ -8,12 +8,16 @@
> >>> #include <common.h>
> >>> #include <asm/io.h>
> >>> #include <asm/arch/sysmap.h>
> >>> +#include <asm/kona-common/clk.h>
> >>>
> >>> #include "dwc2_udc_otg_priv.h"
> >>> #include "bcm_udc_otg.h"
> >>>
> >>> void otg_phy_init(struct dwc2_udc *dev)
> >>> {
> >>> + /* turn on the USB OTG clocks */
> >>> + clk_usb_otg_enable((void *)HSOTG_BASE_ADDR);
> >>
> >> I _think_ this driver is used on RPi too, did you compile test it
there?
> >
> > no, it is not - the only place this is used is:
> > drivers/usb/gadget/Makefile:obj-$(CONFIG_USB_GADGET_BCM_UDC_OTG_PHY)
> > += bcm_udc_otg_phy.o
> > include/configs/bcm28155_ap.h:#define
CONFIG_USB_GADGET_BCM_UDC_OTG_PHY
>
> Got it, thanks for checking.
>
> Do you want me to pick this up via u-boot-usb or shall this go via some
> other tree as a series ?
>
I don't have any preference - what is the best way to get my outstanding
patches applied?
Thanks, Steve
> > Thanks, Steve
> > PS.
> > "rpi" and "rpi_2" both build successfully....
> >
> >>
> >>
> >>> /* set Phy to driving mode */
> >>> wfld_clear(HSOTG_CTRL_BASE_ADDR + HSOTG_CTRL_PHY_P1CTL_OFFSET,
> >>> HSOTG_CTRL_PHY_P1CTL_NON_DRIVING_MASK);
> >>>
> >>
> >>
> >> --
> >> Best regards,
> >> Marek Vasut
>
>
> --
> Best regards,
> Marek Vasut
More information about the U-Boot
mailing list