[U-Boot] [PATCH] arm: socfpga: Add samtec VIN|ING board

[Dinh Nguyen]

On 04/13/2016 07:24 AM, Marek Vasut wrote:
> Add support for board based on the popular Altera Cyclone V SoC.
> This board has the following properties:
>  - 1 GiB of DRAM
>  - 1 Gigabit ethernet
>  - 1 USB gadget port
>  - 1 USB host port with an on-board hub
>  - 2 QSPI NORs connected to the Cadence QSPI core
>  - Multiple I2C EEPROMs and one I2C temperature sensor
> 
> Signed-off-by: Marek Vasut <marex at denx.de>
> Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
> Cc: Chin Liang See <clsee at altera.com>
> ---

[snip]

> --- /dev/null
> +++ b/include/configs/socfpga_vining_fpga.h
> @@ -0,0 +1,246 @@
> +/*
> + * Copyright (C) 2015 Marek Vasut <marex at denx.de>
> + *
> + * SPDX-License-Identifier:	GPL-2.0+
> + */
> +#ifndef __CONFIG_SAMTEC_VINING_FPGA_H__
> +#define __CONFIG_SAMTEC_VINING_FPGA_H__
> +
> +#include <asm/arch/base_addr_ac5.h>
> +
> +/* U-Boot Commands */
> +#define CONFIG_SYS_NO_FLASH
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_FAT_WRITE
> +#define CONFIG_HW_WATCHDOG
> +
> +#define CONFIG_CMD_ASKENV
> +#define CONFIG_CMD_BOOTZ
> +#define CONFIG_CMD_CACHE
> +#define CONFIG_CMD_DFU
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_EEPROM
> +#define CONFIG_CMD_EXT4
> +#define CONFIG_CMD_EXT4_WRITE
> +#define CONFIG_CMD_FAT
> +#define CONFIG_CMD_FS_GENERIC
> +#define CONFIG_CMD_GREPENV
> +#define CONFIG_CMD_LED
> +#define CONFIG_CMD_MII
> +#define CONFIG_CMD_MMC
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_USB
> +#define CONFIG_CMD_USB_MASS_STORAGE
> +

With my patch[1], you don't need all of those common configs, all you
need is:

#define CONFIG_CMD_DFU
#define CONFIG_CMD_USB
#define CONFIG_CMD_USB_MASS_STORAGE


Thanks,
Dinh

[1] http://lists.denx.de/pipermail/u-boot/2016-April/251654.html