[U-Boot] [PATCH 1/1] pico-imx6ul: Update the defconfig
Tom Rini
trini at konsulko.com
Tue Apr 26 00:07:34 CEST 2016
The defconfig/config.h file were merged but were already out of sync
with mainline. This brings them further into line now.
Cc: Richard Hu <richard.hu at technexion.com>
Cc: Fabio Estevam <fabio.estevam at nxp.com>
Signed-off-by: Tom Rini <trini at konsulko.com>
---
As the board doesn't compile currently I'm going to apply this.
configs/pico-imx6ul_defconfig | 19 ++++++++++++++++++-
include/configs/pico-imx6ul.h | 8 --------
2 files changed, 18 insertions(+), 9 deletions(-)
diff --git a/configs/pico-imx6ul_defconfig b/configs/pico-imx6ul_defconfig
index 9157faa..cc49dc9 100644
--- a/configs/pico-imx6ul_defconfig
+++ b/configs/pico-imx6ul_defconfig
@@ -1,5 +1,22 @@
CONFIG_ARM=y
CONFIG_ARCH_MX6=y
-CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx6ul/imximage.cfg"
CONFIG_TARGET_PICO_IMX6UL=y
+CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=board/technexion/pico-imx6ul/imximage.cfg"
+CONFIG_CMD_BOOTZ=y
+# CONFIG_CMD_IMLS is not set
+CONFIG_CMD_MEMTEST=y
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_USB_MASS_STORAGE=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MII=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_CACHE=y
+CONFIG_CMD_EXT2=y
+CONFIG_CMD_EXT4=y
+CONFIG_CMD_EXT4_WRITE=y
+CONFIG_CMD_FAT=y
+CONFIG_CMD_FS_GENERIC=y
CONFIG_OF_LIBFDT=y
diff --git a/include/configs/pico-imx6ul.h b/include/configs/pico-imx6ul.h
index 3e37815..d848ead 100644
--- a/include/configs/pico-imx6ul.h
+++ b/include/configs/pico-imx6ul.h
@@ -31,14 +31,11 @@
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
#define CONFIG_MMC
-#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
-#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION
#define CONFIG_SUPPORT_EMMC_BOOT
/* USB Configs */
-#define CONFIG_CMD_USB
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
@@ -52,7 +49,6 @@
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET
-#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_VBUS_DRAW 2
@@ -100,7 +96,6 @@
"fi; " \
"else run netboot; fi"
-#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M
@@ -134,7 +129,4 @@
#define CONFIG_SYS_MMC_ENV_PART 0
#define CONFIG_MMCROOT "/dev/mmcblk0p2"
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_CACHE
-
#endif /* __PICO_IMX6UL_CONFIG_H */
--
1.9.1
More information about the U-Boot
mailing list