[U-Boot] Fwd: Marvell Armada XP u-boot from uart

[pani]

I have a Armada A388 board that I have the same problem with.
(Using u-boot git master branch from today)

After downloading the kwb-file, the output is as below.
This is the same with the BOOT_FROM untouched or set to uart.

Did you have any luck finding out what the problem was?

Sending boot message. Please reboot the target...-
Sending boot image...
  0 %
[......................................................................]
  1 %
[......................................................................]
  3 %
[......................................................................]
  5 %
[......................................................................]
  6 %
[......................................................................]
  8 %
[......................................................................]
 10 %
[......................................................................]
 12 %
[......................................................................]
 13 %
[......................................................................]
 15 %
[......................................................................]
 17 %
[......................................................................]
 18 %
[......................................................................]
 20 %
[......................................................................]
 22 %
[......................................................................]
 24 %
[......................................................................]
 25 %
[......................................................................]
 27 %
[......................................................................]
 29 %
[......................................................................]
 30 % [...................
U-Boot SPL 2016.03-00668-g4ed6ed3-dirty (Apr 06 2016 - 11:00:55)
High speed PHY - Version: 2.0
Detected Device ID 6828
board SerDes lanes topology details:
 | Lane #  | Speed |  Type       |
 --------------------------------
 |   0    |  3   |  SATA0 |
 |   1    |  0   |  SGMII1 |
 |   2    |  5   |  PCIe1 |
 |   3    |  5   |  USB3 HOST1 |
 |   4    |  5   |  PCIe2 |
 |   5    |  0   |  SGMII2 |
 --------------------------------
PCIe, Idx 1: detected no link
PCIe, Idx 2: detected no link
High speed PHY - Ended Successfully
DDR3 Training Sequence - Ver TIP-1.29.0
DDR3 Training Sequence - Switching XBAR Window to FastPath Window
DDR3 Training Sequence - Ended Successfully
Trying to boot from unknown boot device
SPL: Unsupported Boot Device!
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
+xmodem: Protocol error 



--
View this message in context: http://u-boot.10912.n7.nabble.com/Marvell-Armada-XP-u-boot-from-uart-tp215431p251080.html
Sent from the U-Boot mailing list archive at Nabble.com.