[U-Boot] [PATCH 5/7] gpio: zynqmp: Add GPIO driver support for ZynqMP
Michal Simek
michal.simek at xilinx.com
Mon Apr 11 12:00:24 CEST 2016
From: Siva Durga Prasad Paladugu <siva.durga.paladugu at xilinx.com>
Add GPIO driver support for ZynqMP platform
Signed-off-by: Siva Durga Prasad Paladugu <sivadur at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---
drivers/gpio/zynq_gpio.c | 200 ++++++++++++++++++++++++++++++++++-------------
1 file changed, 147 insertions(+), 53 deletions(-)
diff --git a/drivers/gpio/zynq_gpio.c b/drivers/gpio/zynq_gpio.c
index 05de9c56519b..3a995f610cb3 100644
--- a/drivers/gpio/zynq_gpio.c
+++ b/drivers/gpio/zynq_gpio.c
@@ -31,18 +31,35 @@ DECLARE_GLOBAL_DATA_PTR;
ZYNQ_GPIO_BANK2_NGPIO + \
ZYNQ_GPIO_BANK3_NGPIO)
-#define ZYNQ_GPIO_BANK0_PIN_MIN 0
-#define ZYNQ_GPIO_BANK0_PIN_MAX (ZYNQ_GPIO_BANK0_PIN_MIN + \
- ZYNQ_GPIO_BANK0_NGPIO - 1)
-#define ZYNQ_GPIO_BANK1_PIN_MIN (ZYNQ_GPIO_BANK0_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK1_PIN_MAX (ZYNQ_GPIO_BANK1_PIN_MIN + \
- ZYNQ_GPIO_BANK1_NGPIO - 1)
-#define ZYNQ_GPIO_BANK2_PIN_MIN (ZYNQ_GPIO_BANK1_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK2_PIN_MAX (ZYNQ_GPIO_BANK2_PIN_MIN + \
- ZYNQ_GPIO_BANK2_NGPIO - 1)
-#define ZYNQ_GPIO_BANK3_PIN_MIN (ZYNQ_GPIO_BANK2_PIN_MAX + 1)
-#define ZYNQ_GPIO_BANK3_PIN_MAX (ZYNQ_GPIO_BANK3_PIN_MIN + \
- ZYNQ_GPIO_BANK3_NGPIO - 1)
+#define ZYNQMP_GPIO_MAX_BANK 6
+
+#define ZYNQMP_GPIO_BANK0_NGPIO 26
+#define ZYNQMP_GPIO_BANK1_NGPIO 26
+#define ZYNQMP_GPIO_BANK2_NGPIO 26
+#define ZYNQMP_GPIO_BANK3_NGPIO 32
+#define ZYNQMP_GPIO_BANK4_NGPIO 32
+#define ZYNQMP_GPIO_BANK5_NGPIO 32
+
+#define ZYNQMP_GPIO_NR_GPIOS 174
+
+#define ZYNQ_GPIO_BANK0_PIN_MIN(str) 0
+#define ZYNQ_GPIO_BANK0_PIN_MAX(str) (ZYNQ_GPIO_BANK0_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK0_NGPIO - 1)
+#define ZYNQ_GPIO_BANK1_PIN_MIN(str) (ZYNQ_GPIO_BANK0_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK1_PIN_MAX(str) (ZYNQ_GPIO_BANK1_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK1_NGPIO - 1)
+#define ZYNQ_GPIO_BANK2_PIN_MIN(str) (ZYNQ_GPIO_BANK1_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK2_PIN_MAX(str) (ZYNQ_GPIO_BANK2_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK2_NGPIO - 1)
+#define ZYNQ_GPIO_BANK3_PIN_MIN(str) (ZYNQ_GPIO_BANK2_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK3_PIN_MAX(str) (ZYNQ_GPIO_BANK3_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK3_NGPIO - 1)
+#define ZYNQ_GPIO_BANK4_PIN_MIN(str) (ZYNQ_GPIO_BANK3_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK4_PIN_MAX(str) (ZYNQ_GPIO_BANK4_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK4_NGPIO - 1)
+#define ZYNQ_GPIO_BANK5_PIN_MIN(str) (ZYNQ_GPIO_BANK4_PIN_MAX(str) + 1)
+#define ZYNQ_GPIO_BANK5_PIN_MAX(str) (ZYNQ_GPIO_BANK5_PIN_MIN(str) + \
+ ZYNQ##str##_GPIO_BANK5_NGPIO - 1)
/* Register offsets for the GPIO device */
/* LSW Mask & Data -WO */
@@ -81,6 +98,55 @@ DECLARE_GLOBAL_DATA_PTR;
struct zynq_gpio_privdata {
phys_addr_t base;
+ const struct zynq_platform_data *p_data;
+};
+
+/**
+ * struct zynq_platform_data - zynq gpio platform data structure
+ * @label: string to store in gpio->label
+ * @ngpio: max number of gpio pins
+ * @max_bank: maximum number of gpio banks
+ * @bank_min: this array represents bank's min pin
+ * @bank_max: this array represents bank's max pin
+ */
+struct zynq_platform_data {
+ const char *label;
+ u16 ngpio;
+ int max_bank;
+ int bank_min[ZYNQMP_GPIO_MAX_BANK];
+ int bank_max[ZYNQMP_GPIO_MAX_BANK];
+};
+
+static const struct zynq_platform_data zynqmp_gpio_def = {
+ .label = "zynqmp_gpio",
+ .ngpio = ZYNQMP_GPIO_NR_GPIOS,
+ .max_bank = ZYNQMP_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(MP),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(MP),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(MP),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(MP),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(MP),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(MP),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(MP),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(MP),
+ .bank_min[4] = ZYNQ_GPIO_BANK4_PIN_MIN(MP),
+ .bank_max[4] = ZYNQ_GPIO_BANK4_PIN_MAX(MP),
+ .bank_min[5] = ZYNQ_GPIO_BANK5_PIN_MIN(MP),
+ .bank_max[5] = ZYNQ_GPIO_BANK5_PIN_MAX(MP),
+};
+
+static const struct zynq_platform_data zynq_gpio_def = {
+ .label = "zynq_gpio",
+ .ngpio = ZYNQ_GPIO_NR_GPIOS,
+ .max_bank = ZYNQ_GPIO_MAX_BANK,
+ .bank_min[0] = ZYNQ_GPIO_BANK0_PIN_MIN(),
+ .bank_max[0] = ZYNQ_GPIO_BANK0_PIN_MAX(),
+ .bank_min[1] = ZYNQ_GPIO_BANK1_PIN_MIN(),
+ .bank_max[1] = ZYNQ_GPIO_BANK1_PIN_MAX(),
+ .bank_min[2] = ZYNQ_GPIO_BANK2_PIN_MIN(),
+ .bank_max[2] = ZYNQ_GPIO_BANK2_PIN_MAX(),
+ .bank_min[3] = ZYNQ_GPIO_BANK3_PIN_MIN(),
+ .bank_max[3] = ZYNQ_GPIO_BANK3_PIN_MAX(),
};
/**
@@ -96,41 +162,39 @@ struct zynq_gpio_privdata {
*/
static inline void zynq_gpio_get_bank_pin(unsigned int pin_num,
unsigned int *bank_num,
- unsigned int *bank_pin_num)
+ unsigned int *bank_pin_num,
+ struct udevice *dev)
{
- switch (pin_num) {
- case ZYNQ_GPIO_BANK0_PIN_MIN ... ZYNQ_GPIO_BANK0_PIN_MAX:
- *bank_num = 0;
- *bank_pin_num = pin_num;
- break;
- case ZYNQ_GPIO_BANK1_PIN_MIN ... ZYNQ_GPIO_BANK1_PIN_MAX:
- *bank_num = 1;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK1_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK2_PIN_MIN ... ZYNQ_GPIO_BANK2_PIN_MAX:
- *bank_num = 2;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK2_PIN_MIN;
- break;
- case ZYNQ_GPIO_BANK3_PIN_MIN ... ZYNQ_GPIO_BANK3_PIN_MAX:
- *bank_num = 3;
- *bank_pin_num = pin_num - ZYNQ_GPIO_BANK3_PIN_MIN;
- break;
- default:
- printf("invalid GPIO pin number: %u\n", pin_num);
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+ int bank;
+
+ for (bank = 0; bank < priv->p_data->max_bank; bank++) {
+ if ((pin_num >= priv->p_data->bank_min[bank]) &&
+ (pin_num <= priv->p_data->bank_max[bank])) {
+ *bank_num = bank;
+ *bank_pin_num = pin_num -
+ priv->p_data->bank_min[bank];
+ return;
+ }
+ }
+
+ if (bank >= priv->p_data->max_bank) {
+ printf("Inavlid bank and pin num\n");
*bank_num = 0;
*bank_pin_num = 0;
- break;
}
}
-static int gpio_is_valid(unsigned gpio)
+static int gpio_is_valid(unsigned gpio, struct udevice *dev)
{
- return (gpio >= 0) && (gpio < ZYNQ_GPIO_NR_GPIOS);
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+
+ return (gpio >= 0) && (gpio < priv->p_data->ngpio);
}
-static int check_gpio(unsigned gpio)
+static int check_gpio(unsigned gpio, struct udevice *dev)
{
- if (!gpio_is_valid(gpio)) {
+ if (!gpio_is_valid(gpio, dev)) {
printf("ERROR : check_gpio: invalid GPIO %d\n", gpio);
return -1;
}
@@ -143,10 +207,10 @@ static int zynq_gpio_get_value(struct udevice *dev, unsigned gpio)
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
data = readl(priv->base +
ZYNQ_GPIO_DATA_RO_OFFSET(bank_num));
@@ -159,10 +223,10 @@ static int zynq_gpio_set_value(struct udevice *dev, unsigned gpio, int value)
unsigned int reg_offset, bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
if (bank_pin_num >= ZYNQ_GPIO_MID_PIN_NUM) {
/* only 16 data bits in bit maskable reg */
@@ -191,10 +255,10 @@ static int zynq_gpio_direction_input(struct udevice *dev, unsigned gpio)
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* bank 0 pins 7 and 8 are special and cannot be used as inputs */
if (bank_num == 0 && (bank_pin_num == 7 || bank_pin_num == 8))
@@ -215,10 +279,10 @@ static int zynq_gpio_direction_output(struct udevice *dev, unsigned gpio,
unsigned int bank_num, bank_pin_num;
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- if (check_gpio(gpio) < 0)
+ if (check_gpio(gpio, dev) < 0)
return -1;
- zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num);
+ zynq_gpio_get_bank_pin(gpio, &bank_num, &bank_pin_num, dev);
/* set the GPIO pin as output */
reg = readl(priv->base + ZYNQ_GPIO_DIRM_OFFSET(bank_num));
@@ -242,29 +306,59 @@ static const struct dm_gpio_ops gpio_zynq_ops = {
.set_value = zynq_gpio_set_value,
};
+static const struct udevice_id zynq_gpio_ids[] = {
+ { .compatible = "xlnx,zynq-gpio-1.0",
+ .data = (ulong)&zynq_gpio_def},
+ { .compatible = "xlnx,zynqmp-gpio-1.0",
+ .data = (ulong)&zynqmp_gpio_def},
+ { }
+};
+
+static void zynq_gpio_getplat_data(struct udevice *dev)
+{
+ const struct udevice_id *of_match = zynq_gpio_ids;
+ int ret;
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+
+ while (of_match->compatible) {
+ ret = fdt_node_offset_by_compatible(gd->fdt_blob, -1,
+ of_match->compatible);
+ if (ret >= 0) {
+ priv->p_data =
+ (struct zynq_platform_data *)of_match->data;
+ break;
+ } else {
+ of_match++;
+ continue;
+ }
+ }
+
+ if (!priv->p_data)
+ printf("No Platform data found\n");
+}
+
static int zynq_gpio_probe(struct udevice *dev)
{
struct zynq_gpio_privdata *priv = dev_get_priv(dev);
+ struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
- priv->base = dev_get_addr(dev);
+ zynq_gpio_getplat_data(dev);
+
+ if (priv->p_data)
+ uc_priv->gpio_count = priv->p_data->ngpio;
return 0;
}
static int zynq_gpio_ofdata_to_platdata(struct udevice *dev)
{
- struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev);
+ struct zynq_gpio_privdata *priv = dev_get_priv(dev);
- uc_priv->gpio_count = ZYNQ_GPIO_NR_GPIOS;
+ priv->base = dev_get_addr(dev);
return 0;
}
-static const struct udevice_id zynq_gpio_ids[] = {
- { .compatible = "xlnx,zynq-gpio-1.0" },
- { }
-};
-
U_BOOT_DRIVER(gpio_zynq) = {
.name = "gpio_zynq",
.id = UCLASS_GPIO,
--
1.9.1
More information about the U-Boot
mailing list