[U-Boot] [PATCH 26/33] ARM64: zynqmp: Added OOB timing settings in zynqmp-ep108.dts

[Michal Simek]

From: Anurag Kumar Vulisha <anurag.kumar.vulisha at xilinx.com>

This patch adds the sata port phy OOB timing values in the sata
device-tree node.

Signed-off-by: Anurag Kumar Vulisha <anuragku at xilinx.com>
Signed-off-by: Michal Simek <michal.simek at xilinx.com>
---

 arch/arm/dts/zynqmp-ep108.dts | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts
index 7fa0694fcd98..e48a360baa72 100644
--- a/arch/arm/dts/zynqmp-ep108.dts
+++ b/arch/arm/dts/zynqmp-ep108.dts
@@ -105,6 +105,15 @@
 &sata {
 	status = "okay";
 	ceva,broken-gen2;
+	/* SATA Phy OOB timing settings */
+	ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+	ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+	ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+	ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>;
+	ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>;
+	ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>;
+	ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>;
+	ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>;
 };
 
 &sdhci0 {
-- 
1.9.1