[U-Boot] [PATCH] ARM: mx6: Enable MMC FS boot support

Robert Nelson robertcnelson at gmail.com
Thu Apr 28 01:32:58 CEST 2016


On Wed, Apr 27, 2016 at 6:28 PM, Marek Vasut <marex at denx.de> wrote:

> On 04/28/2016 01:16 AM, Tom Rini wrote:
> > On Thu, Apr 28, 2016 at 01:06:07AM +0200, Marek Vasut wrote:
> >
> >> Enable support for booting U-Boot image from filesystem instead of some
> >> random offset on the SD card. This makes the board usable by putting the
> >> u-boot.img to first partition of the SD card and writing the SPL this
> way:
> >> $ dd if=u-boot-with-spl.imx of=/dev/sdX seek=2 bs=512
> >
> > Wait, you're still writing u-boot + SPL to the device and not just SPL,
> > but it's still preferring the filesystem one over the appended one?
> >
>
> Ha, good point. I should've written the 'SPL' file instead, which is
> just the SPL without U-Boot. I don't want to install U-Boot to random
> offset on the SD card as it has the potential to corrupt data if the
> u-boot binary changes in size.
>
> If I install u-boot image to random offset 138 blocks from the start of
> SD card, it will boot that, otherwise it will load from FS.
>
> I will update the commit message with the correct info, sorry.
>

Oh, we went thru this last year...

http://lists.denx.de/pipermail/u-boot/2015-August/222061.html

If your serious about changing "one" i.mx6 board, you need to change them
"all".

Otherwise leave a 1MB hole on your mmc partition and dd spl/u-boot.img as
that works for ti/imx/sunxi...

Regards,

-- 
Robert Nelson
https://rcn-ee.com/


More information about the U-Boot mailing list