[U-Boot] [PATCH 14/44] dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI

Simon Glass sjg at chromium.org
Sun Apr 10 04:45:06 CEST 2016 

This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.

Signed-off-by: Simon Glass <sjg at chromium.org>
---

 README                                     | 4 ++--
 api/api_storage.c                          | 2 +-
 arch/arm/include/asm/arch-ls102xa/config.h | 2 +-
 board/mpl/pip405/README                    | 6 +++---
 cmd/Makefile                               | 4 ++--
 cmd/disk.c                                 | 2 +-
 common/board_r.c                           | 4 ++--
 disk/part.c                                | 2 +-
 drivers/block/sym53c8xx.c                  | 2 +-
 fs/fat/fat.c                               | 2 +-
 include/config_cmd_all.h                   | 2 +-
 include/config_distro_bootcmd.h            | 6 +++---
 include/config_fallbacks.h                 | 2 +-
 include/configs/MPC8544DS.h                | 2 +-
 include/configs/MPC8572DS.h                | 2 +-
 include/configs/MPC8610HPCD.h              | 2 +-
 include/configs/MPC8641HPCN.h              | 2 +-
 include/configs/PIP405.h                   | 2 +-
 include/configs/am57xx_evm.h               | 2 +-
 include/configs/cm_t54.h                   | 2 +-
 include/configs/db-88f6820-gp.h            | 2 +-
 include/configs/dra7xx_evm.h               | 2 +-
 include/configs/efi-x86.h                  | 2 +-
 include/configs/galileo.h                  | 2 +-
 include/configs/highbank.h                 | 2 +-
 include/configs/ls1043aqds.h               | 2 +-
 include/configs/ls2080aqds.h               | 2 +-
 include/configs/ls2080ardb.h               | 2 +-
 include/configs/omap5_uevm.h               | 2 +-
 include/configs/qemu-x86.h                 | 2 +-
 include/configs/sunxi-common.h             | 2 +-
 include/configs/x86-common.h               | 2 +-
 include/configs/xilinx_zynqmp.h            | 2 +-
 33 files changed, 40 insertions(+), 40 deletions(-)

diff --git a/README b/README
index 597d615..18caa97 100644
--- a/README
+++ b/README
@@ -1066,7 +1066,7 @@ The following options need to be configured:
 		CONFIG_CMD_RUN		  run command in env variable
 		CONFIG_CMD_SANDBOX	* sb command to access sandbox features
 		CONFIG_CMD_SAVES	* save S record dump
-		CONFIG_CMD_SCSI		* SCSI Support
+		CONFIG_SCSI		* SCSI Support
 		CONFIG_CMD_SDRAM	* print SDRAM configuration information
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
@@ -1254,7 +1254,7 @@ The following options need to be configured:
 		CONFIG_MTD_PARTITIONS  Memory Technology Device partition table.
 
 		If IDE or SCSI support is enabled (CONFIG_CMD_IDE or
-		CONFIG_CMD_SCSI) you must configure support for at
+		CONFIG_SCSI) you must configure support for at
 		least one non-MTD partition type as well.
 
 - IDE Reset method:
diff --git a/api/api_storage.c b/api/api_storage.c
index 8c30c56..d425a9a 100644
--- a/api/api_storage.c
+++ b/api/api_storage.c
@@ -67,7 +67,7 @@ void dev_stor_init(void)
 	specs[ENUM_SATA].type = DEV_TYP_STOR | DT_STOR_SATA;
 	specs[ENUM_SATA].name = "sata";
 #endif
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
 	specs[ENUM_SCSI].max_dev = CONFIG_SYS_SCSI_MAX_DEVICE;
 	specs[ENUM_SCSI].enum_started = 0;
 	specs[ENUM_SCSI].enum_ended = 0;
diff --git a/arch/arm/include/asm/arch-ls102xa/config.h b/arch/arm/include/asm/arch-ls102xa/config.h
index ab4b697..cde5923 100644
--- a/arch/arm/include/asm/arch-ls102xa/config.h
+++ b/arch/arm/include/asm/arch-ls102xa/config.h
@@ -82,7 +82,7 @@
 /* SATA */
 #define AHCI_BASE_ADDR				(CONFIG_SYS_IMMR + 0x02200000)
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/board/mpl/pip405/README b/board/mpl/pip405/README
index e900c56..f039817 100644
--- a/board/mpl/pip405/README
+++ b/board/mpl/pip405/README
@@ -32,8 +32,8 @@ Changed files:
 - include/cmd_bsp.h		added PIP405 commands definitions
 - include/cmd_condefs.h		added Floppy and SCSI support
 - include/cmd_disk.h		changed to work with block device description
-- include/config_LANTEC.h	excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
-- include/config_hymod.h	excluded CONFIG_CMD_FDC and CONFIG_CMD_SCSI
+- include/config_LANTEC.h	excluded CONFIG_CMD_FDC and CONFIG_SCSI
+- include/config_hymod.h	excluded CONFIG_CMD_FDC and CONFIG_SCSI
 - include/flash.h		added INTEL_ID_28F320C3T  0x88C488C4
 - include/i2c.h			added "defined(CONFIG_PIP405)"
 - include/image.h		added IH_OS_U_BOOT, IH_TYPE_FIRMWARE
@@ -86,7 +86,7 @@ section "Changes".
 
 New Commands:
 -------------
-CONFIG_CMD_SCSI	SCSI Support
+CONFIG_SCSI	SCSI Support
 CONFIG_CMF_FDC	Floppy disk support
 
 IDE additions:
diff --git a/cmd/Makefile b/cmd/Makefile
index ba04197..2aaf978 100644
--- a/cmd/Makefile
+++ b/cmd/Makefile
@@ -112,7 +112,7 @@ obj-$(CONFIG_CMD_REMOTEPROC) += remoteproc.o
 obj-$(CONFIG_SANDBOX) += host.o
 obj-$(CONFIG_CMD_SATA) += sata.o
 obj-$(CONFIG_CMD_SF) += sf.o
-obj-$(CONFIG_CMD_SCSI) += scsi.o
+obj-$(CONFIG_SCSI) += scsi.o
 obj-$(CONFIG_CMD_SHA1SUM) += sha1sum.o
 obj-$(CONFIG_CMD_SETEXPR) += setexpr.o
 obj-$(CONFIG_CMD_SOFTSWITCH) += softswitch.o
@@ -157,7 +157,7 @@ endif # !CONFIG_SPL_BUILD
 
 ifdef CONFIG_SPL_BUILD
 ifdef CONFIG_SPL_SATA_SUPPORT
-obj-$(CONFIG_CMD_SCSI) += scsi.o
+obj-$(CONFIG_SCSI) += scsi.o
 endif
 endif # CONFIG_SPL_BUILD
 
diff --git a/cmd/disk.c b/cmd/disk.c
index 2fd1717..fcc4123 100644
--- a/cmd/disk.c
+++ b/cmd/disk.c
@@ -8,7 +8,7 @@
 #include <command.h>
 #include <part.h>
 
-#if defined(CONFIG_CMD_IDE) || defined(CONFIG_CMD_SCSI) || \
+#if defined(CONFIG_CMD_IDE) || defined(CONFIG_SCSI) || \
 	defined(CONFIG_USB_STORAGE)
 int common_diskboot(cmd_tbl_t *cmdtp, const char *intf, int argc,
 		    char *const argv[])
diff --git a/common/board_r.c b/common/board_r.c
index ad02549..d959ad3 100644
--- a/common/board_r.c
+++ b/common/board_r.c
@@ -620,7 +620,7 @@ static int initr_ambapp_print(void)
 }
 #endif
 
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
 static int initr_scsi(void)
 {
 	puts("SCSI:  ");
@@ -923,7 +923,7 @@ init_fnc_t init_sequence_r[] = {
 	initr_ambapp_print,
 #endif
 #endif
-#ifdef CONFIG_CMD_SCSI
+#ifdef CONFIG_SCSI
 	INIT_FUNC_WATCHDOG_RESET
 	initr_scsi,
 #endif
diff --git a/disk/part.c b/disk/part.c
index 0aff954..a1d1d92 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -28,7 +28,7 @@ const struct block_drvr block_drvr[] = {
 #if defined(CONFIG_CMD_SATA)
 	{.name = "sata", .get_dev = sata_get_dev, },
 #endif
-#if defined(CONFIG_CMD_SCSI)
+#if defined(CONFIG_SCSI)
 	{ .name = "scsi", .get_dev = scsi_get_dev, },
 #endif
 #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
diff --git a/drivers/block/sym53c8xx.c b/drivers/block/sym53c8xx.c
index c7c40af..5daede7 100644
--- a/drivers/block/sym53c8xx.c
+++ b/drivers/block/sym53c8xx.c
@@ -33,7 +33,7 @@
 #define PRINTF(fmt,args...)
 #endif
 
-#if defined(CONFIG_CMD_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
+#if defined(CONFIG_SCSI) && defined(CONFIG_SCSI_SYM53C8XX)
 
 #undef SCSI_SINGLE_STEP
 /*
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 600a90e..826bd85 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -1254,7 +1254,7 @@ int file_fat_detectfs(void)
 
 #if defined(CONFIG_CMD_IDE) || \
     defined(CONFIG_CMD_SATA) || \
-    defined(CONFIG_CMD_SCSI) || \
+    defined(CONFIG_SCSI) || \
     defined(CONFIG_CMD_USB) || \
     defined(CONFIG_MMC)
 	printf("Interface:  ");
diff --git a/include/config_cmd_all.h b/include/config_cmd_all.h
index e858e55..a8a3307 100644
--- a/include/config_cmd_all.h
+++ b/include/config_cmd_all.h
@@ -60,7 +60,7 @@
 #define CONFIG_CMD_READ		/* Read data from partition	*/
 #define CONFIG_CMD_SANDBOX	/* sb command to access sandbox features */
 #define CONFIG_CMD_SAVES	/* save S record dump		*/
-#define CONFIG_CMD_SCSI		/* SCSI Support			*/
+#define CONFIG_SCSI		/* SCSI Support			*/
 #define CONFIG_CMD_SDRAM	/* SDRAM DIMM SPD info printout */
 #define CONFIG_CMD_SNTP		/* SNTP support			*/
 #define CONFIG_CMD_SPI		/* SPI utility			*/
diff --git a/include/config_distro_bootcmd.h b/include/config_distro_bootcmd.h
index ad9045e..f419a4b 100644
--- a/include/config_distro_bootcmd.h
+++ b/include/config_distro_bootcmd.h
@@ -144,7 +144,7 @@
 	BOOT_TARGET_DEVICES_references_SATA_without_CONFIG_CMD_SATA
 #endif
 
-#ifdef CONFIG_CMD_SCSI
+#ifdef CONFIG_SCSI
 #define BOOTENV_RUN_SCSI_INIT "run scsi_init; "
 #define BOOTENV_SET_SCSI_NEED_INIT "setenv scsi_need_init; "
 #define BOOTENV_SHARED_SCSI \
@@ -164,9 +164,9 @@
 #define BOOTENV_SET_SCSI_NEED_INIT
 #define BOOTENV_SHARED_SCSI
 #define BOOTENV_DEV_SCSI \
-	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
+	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
 #define BOOTENV_DEV_NAME_SCSI \
-	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_CMD_SCSI
+	BOOT_TARGET_DEVICES_references_SCSI_without_CONFIG_SCSI
 #endif
 
 #ifdef CONFIG_CMD_IDE
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 6b6ec00..245bd4d 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -45,7 +45,7 @@
 /* Rather than repeat this expression each time, add a define for it */
 #if defined(CONFIG_CMD_IDE) || \
 	defined(CONFIG_CMD_SATA) || \
-	defined(CONFIG_CMD_SCSI) || \
+	defined(CONFIG_SCSI) || \
 	defined(CONFIG_CMD_USB) || \
 	defined(CONFIG_CMD_PART) || \
 	defined(CONFIG_CMD_GPT) || \
diff --git a/include/configs/MPC8544DS.h b/include/configs/MPC8544DS.h
index 2372d5f..7ba3d5f 100644
--- a/include/configs/MPC8544DS.h
+++ b/include/configs/MPC8544DS.h
@@ -383,7 +383,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
-    #define CONFIG_CMD_SCSI
+    #define CONFIG_SCSI
     #define CONFIG_CMD_EXT2
 #endif
 
diff --git a/include/configs/MPC8572DS.h b/include/configs/MPC8572DS.h
index 95f59e0..0daf85c 100644
--- a/include/configs/MPC8572DS.h
+++ b/include/configs/MPC8572DS.h
@@ -586,7 +586,7 @@
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_EXT2
 #endif
 
diff --git a/include/configs/MPC8610HPCD.h b/include/configs/MPC8610HPCD.h
index ac219d1..65d5c2b 100644
--- a/include/configs/MPC8610HPCD.h
+++ b/include/configs/MPC8610HPCD.h
@@ -464,7 +464,7 @@
 
 #if defined(CONFIG_PCI)
 #define CONFIG_CMD_PCI
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_EXT2
 #define CONFIG_CMD_USB
 #endif
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index cd8d91f..6a85890 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -620,7 +620,7 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_PCI)
     #define CONFIG_CMD_PCI
-    #define CONFIG_CMD_SCSI
+    #define CONFIG_SCSI
     #define CONFIG_CMD_EXT2
     #define CONFIG_CMD_USB
 #endif
diff --git a/include/configs/PIP405.h b/include/configs/PIP405.h
index b5959c8..46eb0a8 100644
--- a/include/configs/PIP405.h
+++ b/include/configs/PIP405.h
@@ -49,7 +49,7 @@
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_REGINFO
 #define CONFIG_CMD_FDC
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_USB
diff --git a/include/configs/am57xx_evm.h b/include/configs/am57xx_evm.h
index 1fffdb1..d982cd1 100644
--- a/include/configs/am57xx_evm.h
+++ b/include/configs/am57xx_evm.h
@@ -79,7 +79,7 @@
 
 /* SATA */
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/cm_t54.h b/include/configs/cm_t54.h
index c8c67c4..249e573 100644
--- a/include/configs/cm_t54.h
+++ b/include/configs/cm_t54.h
@@ -60,7 +60,7 @@
 #define CONFIG_SPL_SATA_BOOT_DEVICE		0
 #define CONFIG_SYS_SATA_FAT_BOOT_PARTITION	1
 
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/db-88f6820-gp.h b/include/configs/db-88f6820-gp.h
index ef14132..d838622 100644
--- a/include/configs/db-88f6820-gp.h
+++ b/include/configs/db-88f6820-gp.h
@@ -36,7 +36,7 @@
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_PCI
 #define CONFIG_CMD_PING
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_SF
 #define CONFIG_CMD_SPI
 #define CONFIG_CMD_TFTPPUT
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h
index 7734e8d..653c0e3 100644
--- a/include/configs/dra7xx_evm.h
+++ b/include/configs/dra7xx_evm.h
@@ -250,7 +250,7 @@
 
 /* SATA */
 #define CONFIG_BOARD_LATE_INIT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/efi-x86.h b/include/configs/efi-x86.h
index 6dd0b32..95e46c5 100644
--- a/include/configs/efi-x86.h
+++ b/include/configs/efi-x86.h
@@ -18,7 +18,7 @@
 #undef CONFIG_VIDEO
 #undef CONFIG_CFB_CONSOLE
 #undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
 #undef CONFIG_INTEL_ICH6_GPIO
 #undef CONFIG_USB_EHCI_PCI
 
diff --git a/include/configs/galileo.h b/include/configs/galileo.h
index 14a42b1..9fe543c 100644
--- a/include/configs/galileo.h
+++ b/include/configs/galileo.h
@@ -29,7 +29,7 @@
 
 /* SATA is not supported in Quark SoC */
 #undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
 
 /* Video is not supported in Quark SoC */
 #undef CONFIG_VIDEO
diff --git a/include/configs/highbank.h b/include/configs/highbank.h
index 510741b..e845465 100644
--- a/include/configs/highbank.h
+++ b/include/configs/highbank.h
@@ -51,7 +51,7 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 
 #define CONFIG_BOOT_RETRY_TIME		-1
 #define CONFIG_RESET_TO_RETRY
diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 7c19122..9421c49 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -108,7 +108,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/ls2080aqds.h b/include/configs/ls2080aqds.h
index 91fad0a..ae9dec8 100644
--- a/include/configs/ls2080aqds.h
+++ b/include/configs/ls2080aqds.h
@@ -44,7 +44,7 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/ls2080ardb.h b/include/configs/ls2080ardb.h
index 15a1172..2e3aeca 100644
--- a/include/configs/ls2080ardb.h
+++ b/include/configs/ls2080ardb.h
@@ -62,7 +62,7 @@ unsigned long get_board_sys_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h
index a5cfa0c..d924ce3 100644
--- a/include/configs/omap5_uevm.h
+++ b/include/configs/omap5_uevm.h
@@ -131,7 +131,7 @@
 /* Max time to hold reset on this board, see doc/README.omap-reset-time */
 #define CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC	16296
 
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h
index b0d2ffe..476d37d 100644
--- a/include/configs/qemu-x86.h
+++ b/include/configs/qemu-x86.h
@@ -43,7 +43,7 @@
 #define CONFIG_ATAPI
 
 #undef CONFIG_SCSI_AHCI
-#undef CONFIG_CMD_SCSI
+#undef CONFIG_SCSI
 #else
 #define CONFIG_SCSI_DEV_LIST		\
 	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_AHCI}
diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h
index 8f11eb9..8aff3a5 100644
--- a/include/configs/sunxi-common.h
+++ b/include/configs/sunxi-common.h
@@ -125,7 +125,7 @@
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SETUP_MEMORY_TAGS
diff --git a/include/configs/x86-common.h b/include/configs/x86-common.h
index ea815c2..6e4e3a9 100644
--- a/include/configs/x86-common.h
+++ b/include/configs/x86-common.h
@@ -106,7 +106,7 @@
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_TIME
 #define CONFIG_CMD_GETTIME
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_EXT2
diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h
index 8cea610..1f85a20 100644
--- a/include/configs/xilinx_zynqmp.h
+++ b/include/configs/xilinx_zynqmp.h
@@ -231,7 +231,7 @@
 #define CONFIG_SYS_SCSI_MAX_LUN		1
 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
 					 CONFIG_SYS_SCSI_MAX_LUN)
-#define CONFIG_CMD_SCSI
+#define CONFIG_SCSI
 #endif
 
 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
-- 
2.8.0.rc3.226.g39d4020

More information about the U-Boot mailing list