[U-Boot] [PATCH] Revert "arm: Remove wireless_space board"
Albert ARIBAUD
albert.u.boot at aribaud.net
Sat Apr 2 20:45:46 CEST 2016
On Sun, 31 Jan 2016 21:37:04 +0100, Albert ARIBAUD <albert.u.boot at aribaud.net> wrote:
> Revert commit b352182a and complete generic board support.
>
> Signed-off-by: Albert ARIBAUD <albert.u.boot at aribaud.net>
> ---
> arch/arm/mach-kirkwood/Kconfig | 4 +
> board/LaCie/wireless_space/Kconfig | 12 ++
> board/LaCie/wireless_space/MAINTAINERS | 6 +
> board/LaCie/wireless_space/Makefile | 12 ++
> board/LaCie/wireless_space/kwbimage.cfg | 71 +++++++++++
> board/LaCie/wireless_space/wireless_space.c | 165 +++++++++++++++++++++++++
> configs/wireless_space_defconfig | 7 ++
> include/configs/wireless_space.h | 179 ++++++++++++++++++++++++++++
> 8 files changed, 456 insertions(+)
> create mode 100644 board/LaCie/wireless_space/Kconfig
> create mode 100644 board/LaCie/wireless_space/MAINTAINERS
> create mode 100644 board/LaCie/wireless_space/Makefile
> create mode 100644 board/LaCie/wireless_space/kwbimage.cfg
> create mode 100644 board/LaCie/wireless_space/wireless_space.c
> create mode 100644 configs/wireless_space_defconfig
> create mode 100644 include/configs/wireless_space.h
>
> diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
> index 9205b1e..9249564 100644
> --- a/arch/arm/mach-kirkwood/Kconfig
> +++ b/arch/arm/mach-kirkwood/Kconfig
> @@ -37,6 +37,9 @@ config TARGET_NET2BIG_V2
> config TARGET_NETSPACE_V2
> bool "LaCie netspace_v2 Board"
>
> +config TARGET_WIRELESS_SPACE
> + bool "LaCie Wireless_space Board"
> +
> config TARGET_IB62X0
> bool "ib62x0 Board"
>
> @@ -68,6 +71,7 @@ source "board/iomega/iconnect/Kconfig"
> source "board/keymile/km_arm/Kconfig"
> source "board/LaCie/net2big_v2/Kconfig"
> source "board/LaCie/netspace_v2/Kconfig"
> +source "board/LaCie/wireless_space/Kconfig"
> source "board/raidsonic/ib62x0/Kconfig"
> source "board/Seagate/dockstar/Kconfig"
> source "board/Seagate/goflexhome/Kconfig"
> diff --git a/board/LaCie/wireless_space/Kconfig b/board/LaCie/wireless_space/Kconfig
> new file mode 100644
> index 0000000..75a2fc5
> --- /dev/null
> +++ b/board/LaCie/wireless_space/Kconfig
> @@ -0,0 +1,12 @@
> +if TARGET_WIRELESS_SPACE
> +
> +config SYS_BOARD
> + default "wireless_space"
> +
> +config SYS_VENDOR
> + default "LaCie"
> +
> +config SYS_CONFIG_NAME
> + default "wireless_space"
> +
> +endif
> diff --git a/board/LaCie/wireless_space/MAINTAINERS b/board/LaCie/wireless_space/MAINTAINERS
> new file mode 100644
> index 0000000..c32ecb8
> --- /dev/null
> +++ b/board/LaCie/wireless_space/MAINTAINERS
> @@ -0,0 +1,6 @@
> +WIRELESS_SPACE BOARD
> +M: Albert ARIBAUD <albert.u.boot at aribaud.net>
> +S: Maintained
> +F: board/LaCie/wireless_space/
> +F: include/configs/wireless_space.h
> +F: configs/wireless_space_defconfig
> diff --git a/board/LaCie/wireless_space/Makefile b/board/LaCie/wireless_space/Makefile
> new file mode 100644
> index 0000000..90a84f4
> --- /dev/null
> +++ b/board/LaCie/wireless_space/Makefile
> @@ -0,0 +1,12 @@
> +#
> +# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> +#
> +# Based on Kirkwood support:
> +# (C) Copyright 2009
> +# Marvell Semiconductor <www.marvell.com>
> +# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +
> +obj-y := wireless_space.o ../common/common.o
> diff --git a/board/LaCie/wireless_space/kwbimage.cfg b/board/LaCie/wireless_space/kwbimage.cfg
> new file mode 100644
> index 0000000..037248b
> --- /dev/null
> +++ b/board/LaCie/wireless_space/kwbimage.cfg
> @@ -0,0 +1,71 @@
> +#
> +# Copyright (C) 2012 Albert ARIBAUD <albert.u.boot at aribaud.net>
> +#
> +# Based on netspace_v2 kwbimage.cfg:
> +# Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> +#
> +# Based on Kirkwood support:
> +# (C) Copyright 2009
> +# Marvell Semiconductor <www.marvell.com>
> +# Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> +#
> +# SPDX-License-Identifier: GPL-2.0+
> +#
> +# Refer doc/README.kwbimage for more details about how-to configure
> +# and create kirkwood boot image
> +#
> +
> +# Boot Media configurations
> +BOOT_FROM nand # Boot from NAND flash
> +NAND_PAGE_SIZE 800
> +
> +# SOC registers configuration using bootrom header extension
> +# Maximum KWBIMAGE_MAX_CONFIG configurations allowed
> +
> +# Values taken from image original LaCie U-Boot header dump!
> +
> +# Configure RGMII-0 interface pad voltage to 1.8V
> +DATA 0xFFD100e0 0x1B1B1B9B
> +
> +#Dram initalization for SINGLE x16 CL=5 @ 400MHz
> +DATA 0xFFD01400 0x43000c30 # DDR Configuration register
> +
> +DATA 0xFFD01404 0x37743000 # DDR Controller Control Low
> +
> +DATA 0xFFD01408 0x11012228 # DDR Timing (Low) (active cycles value +1)
> +
> +DATA 0xFFD0140C 0x00000A19 # DDR Timing (High)
> +
> +DATA 0xFFD01410 0x0000CCCC # DDR Address Control
> +
> +DATA 0xFFD01414 0x00000000 # DDR Open Pages Control
> +
> +DATA 0xFFD01418 0x00000000 # DDR Operation
> +
> +DATA 0xFFD0141C 0x00000662 # DDR Mode
> +
> +DATA 0xFFD01420 0x00000004 # DDR Extended Mode
> +
> +DATA 0xFFD01424 0x0000F07F # DDR Controller Control High
> +
> +DATA 0xFFD01428 0x00096630 # DDR2 ODT Read Timing (default values)
> +
> +DATA 0xFFD0147C 0x00009663 # DDR2 ODT Write Timing (default values)
> +
> +DATA 0xFFD01504 0x0FFFFFF1 # CS[0]n Size
> +DATA 0xFFD01508 0x00000000 # CS[1]n Base address to 0x0
> +DATA 0xFFD0150C 0x00000000 # CS[1]n Size, window disabled
> +DATA 0xFFD01514 0x00000000 # CS[2]n Size, window disabled
> +DATA 0xFFD0151C 0x00000000 # CS[3]n Size, window disabled
> +DATA 0xFFD01494 0x00120012 # DDR ODT Control (Low)
> +DATA 0xFFD01498 0x00000000 # DDR ODT Control (High)
> +DATA 0xFFD0149C 0x0000E40F # CPU ODT Control
> +DATA 0xFFD01480 0x00000001 # DDR Initialization Control
> +DATA 0xFFD20134 0x66666666
> +DATA 0xFFD20138 0x66666666
> +DATA 0xFFD10000 0x01112222
> +DATA 0xFFD1000C 0x00000000
> +DATA 0xFFD10104 0x00000000
> +DATA 0xFFD10100 0x40000000
> +# End of Header extension
> +DATA 0x0 0x0
> diff --git a/board/LaCie/wireless_space/wireless_space.c b/board/LaCie/wireless_space/wireless_space.c
> new file mode 100644
> index 0000000..8620e4b
> --- /dev/null
> +++ b/board/LaCie/wireless_space/wireless_space.c
> @@ -0,0 +1,165 @@
> +/*
> + * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> + *
> + * Based on Kirkwood support:
> + * (C) Copyright 2009
> + * Marvell Semiconductor <www.marvell.com>
> + * Written-by: Prafulla Wadaskar <prafulla at marvell.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#include <common.h>
> +#include <command.h>
> +#include <asm/arch/cpu.h>
> +#include <asm/arch/soc.h>
> +#include <asm/arch/mpp.h>
> +#include <asm/arch/gpio.h>
> +
> +#include "../common/common.h"
> +#include "netdev.h"
> +
> +DECLARE_GLOBAL_DATA_PTR;
> +
> +/* GPIO configuration: start FAN at low speed, USB and HDD */
> +
> +#define WIRELESS_SPACE_OE_LOW 0xFF006808
> +#define WIRELESS_SPACE_OE_HIGH 0x0000F989
> +#define WIRELESS_SPACE_OE_VAL_LOW 0x00010080
> +#define WIRELESS_SPACE_OE_VAL_HIGH 0x00000240
> +
> +#define WIRELESS_SPACE_REAR_BUTTON 13
> +#define WIRELESS_SPACE_FRONT_BUTTON 43
> +
> +const u32 kwmpp_config[] = {
> + MPP0_NF_IO2,
> + MPP1_NF_IO3,
> + MPP2_NF_IO4,
> + MPP3_NF_IO5,
> + MPP4_NF_IO6,
> + MPP5_NF_IO7,
> + MPP6_SYSRST_OUTn,
> + MPP7_GPO, /* Fan speed (bit 1) */
> + MPP8_TW_SDA,
> + MPP9_TW_SCK,
> + MPP10_UART0_TXD,
> + MPP11_UART0_RXD,
> + MPP13_GPIO, /* Red led */
> + MPP14_GPIO, /* USB fuse */
> + MPP15_SATA0_ACTn,
> + MPP16_GPIO, /* SATA 0 power */
> + MPP17_GPIO, /* SATA 1 power */
> + MPP18_NF_IO0,
> + MPP19_NF_IO1,
> + MPP20_GE1_0, /* Gigabit Ethernet 1 */
> + MPP21_GE1_1,
> + MPP22_GE1_2,
> + MPP23_GE1_3,
> + MPP24_GE1_4,
> + MPP25_GE1_5,
> + MPP26_GE1_6,
> + MPP27_GE1_7,
> + MPP28_GE1_8,
> + MPP29_GE1_9,
> + MPP30_GE1_10,
> + MPP31_GE1_11,
> + MPP32_GE1_12,
> + MPP33_GE1_13,
> + MPP34_GE1_14,
> + MPP35_GE1_15,
> + MPP36_GPIO, /* Fan speed (bit 2) */
> + MPP37_GPIO, /* Fan speed (bit 0) */
> + MPP38_GPIO, /* Fan power */
> + MPP39_GPIO, /* Fan rotation fail */
> + MPP40_GPIO, /* Ethernet switch link */
> + MPP41_GPIO, /* USB enable host vbus */
> + MPP42_GPIO, /* LED clock control */
> + MPP43_GPIO, /* WPS button (0=Pushed, 1=Released) */
> + MPP44_GPIO, /* Red LED on/off */
> + MPP45_GPIO, /* Red LED timer blink (on=off=100ms) */
> + MPP46_GPIO, /* Green LED on/off */
> + MPP47_GPIO, /* LED (blue, green) SATA activity blink */
> + MPP48_GPIO, /* Blue LED on/off */
> + 0
> +};
> +
> +struct mv88e61xx_config swcfg = {
> + .name = "egiga0",
> + .vlancfg = MV88E61XX_VLANCFG_ROUTER,
> + .rgmii_delay = MV88E61XX_RGMII_DELAY_EN,
> + .led_init = MV88E61XX_LED_INIT_EN,
> + .mdip = MV88E61XX_MDIP_NOCHANGE,
> + .portstate = MV88E61XX_PORTSTT_FORWARDING,
> + .cpuport = 0x20,
> + .ports_enabled = 0x3F,
> +};
> +
> +int board_early_init_f(void)
> +{
> + /* Gpio configuration */
> + mvebu_config_gpio(WIRELESS_SPACE_OE_VAL_LOW, WIRELESS_SPACE_OE_VAL_HIGH,
> + WIRELESS_SPACE_OE_LOW, WIRELESS_SPACE_OE_HIGH);
> +
> + /* Multi-Purpose Pins Functionality configuration */
> + kirkwood_mpp_conf(kwmpp_config, NULL);
> +
> + return 0;
> +}
> +
> +int board_init(void)
> +{
> + /* Machine number */
> + gd->bd->bi_arch_number = CONFIG_MACH_TYPE;
> +
> + /* Boot parameters address */
> + gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
> +
> + return 0;
> +}
> +
> +#if defined(CONFIG_MISC_INIT_R)
> +int misc_init_r(void)
> +{
> +#if defined(CONFIG_CMD_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR)
> + if (!getenv("ethaddr")) {
> + uchar mac[6];
> + if (lacie_read_mac_address(mac) == 0)
> + eth_setenv_enetaddr("ethaddr", mac);
> + }
> +#endif
> + return 0;
> +}
> +#endif
> +
> +#if defined(CONFIG_CMD_NET) && defined(CONFIG_RESET_PHY_R)
> +/* Configure and initialize PHY */
> +void reset_phy(void)
> +{
> + /* configure switch on egiga0 */
> + mv88e61xx_switch_initialize(&swcfg);
> +}
> +#endif
> +
> +#if defined(CONFIG_KIRKWOOD_GPIO) && defined(CONFIG_WIRELESS_SPACE_CMD)
> +/* Return GPIO button status */
> +static int
> +do_ws(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
> +{
> + if (strcmp(argv[1], "button") == 0) {
> + if (strcmp(argv[2], "rear") == 0)
> + /* invert GPIO result for intuitive while/until use */
> + return !kw_gpio_get_value(WIRELESS_SPACE_REAR_BUTTON);
> + else if (strcmp(argv[2], "front") == 0)
> + return kw_gpio_get_value(WIRELESS_SPACE_FRONT_BUTTON);
> + else
> + return -1;
> + } else {
> + return -1;
> + }
> +}
> +
> +U_BOOT_CMD(ws, 3, 0, do_ws,
> + "Return GPIO button status 0=off 1=on",
> + "- ws button rear|front: test buttons' states\n"
> +);
> +#endif
> diff --git a/configs/wireless_space_defconfig b/configs/wireless_space_defconfig
> new file mode 100644
> index 0000000..daf8870
> --- /dev/null
> +++ b/configs/wireless_space_defconfig
> @@ -0,0 +1,7 @@
> +CONFIG_ARM=y
> +CONFIG_KIRKWOOD=y
> +CONFIG_TARGET_WIRELESS_SPACE=y
> +# CONFIG_CMD_IMLS is not set
> +# CONFIG_CMD_FLASH is not set
> +# CONFIG_CMD_SETEXPR is not set
> +CONFIG_SYS_NS16550=y
> diff --git a/include/configs/wireless_space.h b/include/configs/wireless_space.h
> new file mode 100644
> index 0000000..191ac1b
> --- /dev/null
> +++ b/include/configs/wireless_space.h
> @@ -0,0 +1,179 @@
> +/*
> + * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot at aribaud.net>
> + *
> + * Based on the netspace_v2 code which is
> + * Copyright (C) 2011 Simon Guinot <sguinot at lacie.com>
> + *
> + * SPDX-License-Identifier: GPL-2.0+
> + */
> +
> +#ifndef _CONFIG_WIRELESS_SPACE_H
> +#define _CONFIG_WIRELESS_SPACE_H
> +
> +/*
> + * Machine number definition
> + */
> +#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
> +#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
> +#define CONFIG_IDENT_STRING " Wireless Space"
> +
> +/*
> + * High Level Configuration Options (easy to change)
> + */
> +#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
> +/* SoC name */
> +#define CONFIG_KW88F6281
> +#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
> +
> +/*
> + * Commands configuration
> + */
> +#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
> +#define CONFIG_CMD_ENV
> +#define CONFIG_CMD_DHCP
> +#define CONFIG_CMD_PING
> +#define CONFIG_CMD_NAND
> +#define CONFIG_CMD_I2C
> +#define CONFIG_CMD_IDE
> +#define CONFIG_CMD_USB
> +
> +/*
> + * Core clock definition
> + */
> +#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
> +
> +/*
> + * SDRAM configuration
> + */
> +#define CONFIG_NR_DRAM_BANKS 1
> +
> +/*
> + * Different SDRAM configuration and size for some of the boards derived
> + * from the Network Space v2
> + */
> +
> +/*
> + * mv-common.h should be defined after CMD configs since it used them
> + * to enable certain macros
> + */
> +#include "mv-common.h"
> +
> +/* Remove or override few declarations from mv-common.h */
> +#undef CONFIG_RBTREE
> +#undef CONFIG_SYS_IDE_MAXBUS
> +#undef CONFIG_SYS_IDE_MAXDEVICE
> +#define CONFIG_SYS_IDE_MAXBUS 1
> +#define CONFIG_SYS_IDE_MAXDEVICE 1
> +
> +/*
> + * Ethernet Driver configuration
> + */
> +#ifdef CONFIG_CMD_NET
> +#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
> +#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
> +#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
> +#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
> +#define CONFIG_MII
> +#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
> +#define CONFIG_NETCONSOLE
> +#define CONFIG_MV88E61XX_SWITCH
> +#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
> +#define CONFIG_MV88E61XX_CMD
> +#define CONFIG_CMD_TFTPPUT
> +#endif /* CONFIG_CMD_NET */
> +
> +/*
> + * SATA Driver configuration
> + */
> +#ifdef CONFIG_MVSATA_IDE
> +#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
> +#endif /* CONFIG_MVSATA_IDE */
> +
> +/*
> + * Enable GPI0 support
> + */
> +#define CONFIG_KIRKWOOD_GPIO
> +
> +/*
> + * Enable I2C support
> + */
> +#ifdef CONFIG_CMD_I2C
> +/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
> +#define CONFIG_CMD_EEPROM
> +#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
> +#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
> +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
> +#endif /* CONFIG_CMD_I2C */
> +
> +/*
> + * Partition support
> + */
> +#define CONFIG_DOS_PARTITION
> +#define CONFIG_EFI_PARTITION
> +
> +/*
> + * File systems support
> + */
> +#define CONFIG_CMD_EXT2
> +#define CONFIG_CMD_FAT
> +
> +/*
> + * Use the HUSH parser
> + */
> +#define CONFIG_SYS_HUSH_PARSER
> +
> +/*
> + * Console configuration
> + */
> +#define CONFIG_CONSOLE_MUX
> +#define CONFIG_SYS_CONSOLE_IS_IN_ENV
> +
> +/*
> + * Enable device tree support
> + */
> +#define CONFIG_OF_LIBFDT
> +
> +/*
> + * Environment variables configurations
> + */
> +
> +#define CONFIG_ENV_IS_IN_NAND
> +#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
> +#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
> +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
> +
> +/*
> + * Board-specific command to make using buttons etc easier
> + */
> +
> +#define CONFIG_WIRELESS_SPACE_CMD
> +
> +/*
> + * Default environment variables
> + */
> +#define CONFIG_PREBOOT
> +
> +#define CONFIG_BOOTARGS "console=ttyS0,115200"
> +
> +#define CONFIG_BOOTCOMMAND \
> + "if run usbload || run diskload; then bootm; fi"
> +
> +#define CONFIG_EXTRA_ENV_SETTINGS \
> + "stdin=serial\0" \
> + "stdout=serial\0" \
> + "stderr=serial\0" \
> + "bootfile=uImage\0" \
> + "loadaddr=0x800000\0" \
> + "autoload=no\0" \
> + "netconsole=" \
> + "set stdin $stdin,nc; " \
> + "set stdout $stdout,nc; " \
> + "set stderr $stderr,nc;\0" \
> + "diskload=ide reset && " \
> + "ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
> + "usbload=usb start && " \
> + "fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
> + "preboot=" \
> + "dhcp && run netconsole\0"
> +
> +#endif /* _CONFIG_WIRELESS_SPACE_H */
> --
> 2.5.0
>
Applied (at last) to u-boot-arm/master.
Amicalement,
--
Albert.
More information about the U-Boot
mailing list