[U-Boot] [uboot] [PATCH v2 1/2] net: phy: dp83867: Add device tree bindings and documentation

[Dan Murphy]

On 04/05/2016 12:40 PM, Michal Simek wrote:
> On 5.4.2016 19:23, Dan Murphy wrote:
>> Add the device tree bindings and the accompanying documentation
>> for the TI DP83867 Giga bit ethernet phy driver.
>>
>> The original document was from:
>>     [commit 2a10154abcb75ad0d7b6bfea6210ac743ec60897 from the Linux kernel]
>>
>> Signed-off-by: Dan Murphy <dmurphy at ti.com>
>> ---
>>
>> v2 - Align the documentation with the actual bindings - https://patchwork.ozlabs.org/patch/606502/
>>
>>  doc/device-tree-bindings/net/ti,dp83867.txt | 28 +++++++++++++++++++++++
>>  include/dt-bindings/net/ti-dp83867.h        | 35 +++++++++++++++++++++++++++++
>>  2 files changed, 63 insertions(+)
>>  create mode 100644 doc/device-tree-bindings/net/ti,dp83867.txt
>>  create mode 100644 include/dt-bindings/net/ti-dp83867.h
>>
>> diff --git a/doc/device-tree-bindings/net/ti,dp83867.txt b/doc/device-tree-bindings/net/ti,dp83867.txt
>> new file mode 100644
>> index 0000000..34b1c35
>> --- /dev/null
>> +++ b/doc/device-tree-bindings/net/ti,dp83867.txt
>> @@ -0,0 +1,28 @@
>> +* Texas Instruments - dp83867 Giga bit ethernet phy
>> +
>> +Required properties:
>> +	- ti,rx_int_delay - RGMII Recieve Clock Delay - see dt-bindings/net/ti-dp83867.h
>> +		for applicable values
>> +	- ti,tx_int_delay - RGMII Transmit Clock Delay - see dt-bindings/net/ti-dp83867.h
>> +		for applicable values
>> +	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
>> +		for applicable values
>> +
>> +Default child nodes are standard Ethernet PHY device
>> +nodes as described in doc/devicetree/bindings/net/ethernet.txt
>> +
>> +Example:
>> +
>> +&mac {
>> +	pinctrl-0 = <&davinci_mdio_default>;
>> +	pinctrl-1 = <&davinci_mdio_sleep>;
>> +	status = "okay";
>> +
>> +	ti,rx_int_delay = <DP83867_RGMIIDCTL_1_50_NS>;
>> +	ti,tx_int_delay = <DP83867_RGMIIDCTL_2_50_NS>;
>> +	ti,fifo_depth = <DP83867_PHYCR_FIFO_DEPTH_8_B_NIB>;
>> +
>> +};
>> +
>> +Datasheet can be found:
>> +http://www.ti.com/product/DP83867IR/datasheet
>> diff --git a/include/dt-bindings/net/ti-dp83867.h b/include/dt-bindings/net/ti-dp83867.h
>> new file mode 100644
>> index 0000000..5c592fb
>> --- /dev/null
>> +++ b/include/dt-bindings/net/ti-dp83867.h
>> @@ -0,0 +1,35 @@
>> +/*
>> + * TI DP83867 PHY drivers
>> + *
>> + * SPDX-License-Identifier:	GPL-2.0
>> + *
>> + */
>> +
>> +#ifndef _DT_BINDINGS_TI_DP83867_H
>> +#define _DT_BINDINGS_TI_DP83867_H
>> +
>> +/* PHY CTRL bits */
>> +#define DP83867_PHYCR_FIFO_DEPTH_3_B_NIB	0x00
>> +#define DP83867_PHYCR_FIFO_DEPTH_4_B_NIB	0x01
>> +#define DP83867_PHYCR_FIFO_DEPTH_6_B_NIB	0x02
>> +#define DP83867_PHYCR_FIFO_DEPTH_8_B_NIB	0x03
>> +
>> +/* RGMIIDCTL internal delay for rx and tx */
>> +#define	DP83867_RGMIIDCTL_250_PS	0x0
>> +#define	DP83867_RGMIIDCTL_500_PS	0x1
>> +#define	DP83867_RGMIIDCTL_750_PS	0x2
>> +#define	DP83867_RGMIIDCTL_1_NS		0x3
>> +#define	DP83867_RGMIIDCTL_1_25_NS	0x4
>> +#define	DP83867_RGMIIDCTL_1_50_NS	0x5
>> +#define	DP83867_RGMIIDCTL_1_75_NS	0x6
>> +#define	DP83867_RGMIIDCTL_2_00_NS	0x7
>> +#define	DP83867_RGMIIDCTL_2_25_NS	0x8
>> +#define	DP83867_RGMIIDCTL_2_50_NS	0x9
>> +#define	DP83867_RGMIIDCTL_2_75_NS	0xa
>> +#define	DP83867_RGMIIDCTL_3_00_NS	0xb
>> +#define	DP83867_RGMIIDCTL_3_25_NS	0xc
>> +#define	DP83867_RGMIIDCTL_3_50_NS	0xd
>> +#define	DP83867_RGMIIDCTL_3_75_NS	0xe
>> +#define	DP83867_RGMIIDCTL_4_00_NS	0xf
>> +
>> +#endif
>>
> Nack from me. Just follow Linux binding instead of create new one.

Why a nack?

This comes from the Linux kernel mainline code I submited.  I am not creating anything new.
This technically should have come in with the original port of the driver I pushed to the Linux kernel.

But I defer to the Tom for the resolution.

Dan

> Thanks,
> Michal
>


-- 
------------------
Dan Murphy