[U-Boot] [PATCH 03/16] arm: Kconfig: Add support for AM43xx SoC specific Kconfig

Lokesh Vutla lokeshvutla at ti.com
Fri Apr 15 12:57:45 CEST 2016



On Tuesday 12 April 2016 05:07 AM, Daniel Allred wrote:
> From: Madan Srinivas <madans at ti.com>
> 
> Adding support for AM43xx secure devices require the addition
> of some SOC specific config options like the amount of memory
> used by public ROM and the address of the entry point of u-boot
> or SPL, as seen by the ROM code, for the image to be built
> correctly.
> 
> This mandates the addition of am AM43xx CONFIG option and the
> ARM Kconfig file has been modified to source this SOC Kconfig
> file. Moving the TARGET_AM43XX_EVM config option to the SOC
> KConfig and out of the arch/arm/Kconfig.
> 
> Updating defconfigs to add the CONFIG_AM43XX=y statement and
> removing the #define CONFIG_AM43XX from the header file.
> 
> Signed-off-by: Madan Srinivas <madans at ti.com>
> Signed-off-by: Daniel Allred <d-allred at ti.com>
> ---
>  arch/arm/Kconfig                          | 19 +++++++++++++------
>  arch/arm/cpu/armv7/am33xx/Kconfig         | 13 +++++++++++++
>  configs/am43xx_evm_defconfig              |  1 +
>  configs/am43xx_evm_ethboot_defconfig      |  1 +
>  configs/am43xx_evm_qspiboot_defconfig     |  1 +
>  configs/am43xx_evm_usbhost_boot_defconfig |  1 +
>  include/configs/am43xx_evm.h              |  2 --
>  7 files changed, 30 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index f18dbe6..088d6e0 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -381,12 +381,6 @@ config TARGET_AM335X_SL50
>  	select DM
>  	select DM_SERIAL
>  
> -config TARGET_AM43XX_EVM
> -	bool "Support am43xx_evm"
> -	select CPU_V7
> -	select SUPPORT_SPL
> -	select TI_I2C_BOARD_DETECT
> -
>  config TARGET_BAV335X
>  	bool "Support bav335x"
>  	select CPU_V7
> @@ -507,6 +501,17 @@ config OMAP54XX
>  	select CPU_V7
>  	select SUPPORT_SPL
>  
> +config AM43XX
> +	bool "AM43XX SoC"
> +	select CPU_V7
> +	select SUPPORT_SPL
> +	help
> +	  Support for AM43xx SOC from Texas Instruments.
> +	  The AM43xx high performance SOC features a Cortex-A9
> +	  ARM core, a quad core PRU-ICSS for industrial Ethernet
> +	  protocols, dual camera support, optional 3D graphics
> +	  and an optional customer programmable secure boot.
> +
>  config RMOBILE
>  	bool "Renesas ARM SoCs"
>  	select CPU_V7
> @@ -776,6 +781,8 @@ source "arch/arm/cpu/armv7/omap4/Kconfig"
>  
>  source "arch/arm/cpu/armv7/omap5/Kconfig"
>  
> +source "arch/arm/cpu/armv7/am33xx/Kconfig"
> +
>  source "arch/arm/mach-orion5x/Kconfig"
>  
>  source "arch/arm/cpu/armv7/rmobile/Kconfig"
> diff --git a/arch/arm/cpu/armv7/am33xx/Kconfig b/arch/arm/cpu/armv7/am33xx/Kconfig
> index 39759cd..68bcc64 100644
> --- a/arch/arm/cpu/armv7/am33xx/Kconfig
> +++ b/arch/arm/cpu/armv7/am33xx/Kconfig
> @@ -1,3 +1,15 @@
> +if AM43XX
> +config TARGET_AM43XX_EVM
> +	bool "Support am43xx_evm"
> +	select CREATE_BOARD_SYMLINK

This should be TI_I2C_BOARD_DETECT or else you will get a build error.

Thanks and regards,
Lokesh

> +	help
> +	  This option specifies support for the AM43xx
> +	  GP and HS EVM development platforms.The AM437x
> +	  GP EVM is a standalone test, development, and
> +	  evaluation module system that enables developers
> +	  to write software and develop hardware around
> +	  an AM43xx processor subsystem.
> +
>  config ISW_ENTRY_ADDR
>  	hex "Address in memory or XIP flash of bootloader entry point"
>  	help
> @@ -25,3 +37,4 @@ config PUB_ROM_DATA_SIZE
>  	  image, this area is no longer used, and can be reclaimed
>  	  for run time use by the boot image.
>  	default 0x8400
> +endif
> diff --git a/configs/am43xx_evm_defconfig b/configs/am43xx_evm_defconfig
> index cc83006..4b0a188 100644
> --- a/configs/am43xx_evm_defconfig
> +++ b/configs/am43xx_evm_defconfig
> @@ -1,4 +1,5 @@
>  CONFIG_ARM=y
> +CONFIG_AM43XX=y
>  CONFIG_TARGET_AM43XX_EVM=y
>  CONFIG_SPL=y
>  CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND"
> diff --git a/configs/am43xx_evm_ethboot_defconfig b/configs/am43xx_evm_ethboot_defconfig
> index a720c14..20001ca 100644
> --- a/configs/am43xx_evm_ethboot_defconfig
> +++ b/configs/am43xx_evm_ethboot_defconfig
> @@ -1,4 +1,5 @@
>  CONFIG_ARM=y
> +CONFIG_AM43XX=y
>  CONFIG_TARGET_AM43XX_EVM=y
>  CONFIG_SPL=y
>  CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_ETH_SUPPORT"
> diff --git a/configs/am43xx_evm_qspiboot_defconfig b/configs/am43xx_evm_qspiboot_defconfig
> index 6db389b..2170a68 100644
> --- a/configs/am43xx_evm_qspiboot_defconfig
> +++ b/configs/am43xx_evm_qspiboot_defconfig
> @@ -1,4 +1,5 @@
>  CONFIG_ARM=y
> +CONFIG_AM43XX=y
>  CONFIG_TARGET_AM43XX_EVM=y
>  CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,QSPI,QSPI_BOOT"
>  # CONFIG_CMD_IMLS is not set
> diff --git a/configs/am43xx_evm_usbhost_boot_defconfig b/configs/am43xx_evm_usbhost_boot_defconfig
> index cbaf5a5..14343a9 100644
> --- a/configs/am43xx_evm_usbhost_boot_defconfig
> +++ b/configs/am43xx_evm_usbhost_boot_defconfig
> @@ -1,4 +1,5 @@
>  CONFIG_ARM=y
> +CONFIG_AM43XX=y
>  CONFIG_TARGET_AM43XX_EVM=y
>  CONFIG_SPL=y
>  CONFIG_SYS_EXTRA_OPTIONS="SERIAL1,CONS_INDEX=1,NAND,SPL_USB_HOST_SUPPORT"
> diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h
> index fd3f6a7..b98f7a1 100644
> --- a/include/configs/am43xx_evm.h
> +++ b/include/configs/am43xx_evm.h
> @@ -9,8 +9,6 @@
>  #ifndef __CONFIG_AM43XX_EVM_H
>  #define __CONFIG_AM43XX_EVM_H
>  
> -#define CONFIG_AM43XX
> -
>  #define CONFIG_CMD_FAT
>  
>  #define CONFIG_BOARD_LATE_INIT
> 


More information about the U-Boot mailing list