[U-Boot] [PATCH v2 1/2] spl: Add an option to load a FIT containing U-Boot from FS
Lokesh Vutla
lokeshvutla at ti.com
Mon Apr 11 06:51:53 CEST 2016
This provides a way to load a FIT containing U-Boot and a selection of device
tree files from a File system.
Signed-off-by: Lokesh Vutla <lokeshvutla at ti.com>
---
Changes since v1:
- Added comments for function declarations.
- Bring out the common code for parsing fit header.
common/spl/spl_fit.c | 146 +++++++++++++++++++++++++++++++++++++++++++--------
include/spl.h | 31 +++++++++++
2 files changed, 154 insertions(+), 23 deletions(-)
diff --git a/common/spl/spl_fit.c b/common/spl/spl_fit.c
index 1a5c027..a4ab67e 100644
--- a/common/spl/spl_fit.c
+++ b/common/spl/spl_fit.c
@@ -82,12 +82,42 @@ static int spl_fit_select_fdt(const void *fdt, int images, int *fdt_offsetp)
return -ENOENT;
}
+#define get_fit_size(fit) ALIGN(fdt_totalsize(fit), 4)
+
+static int spl_parse_fit_header(void *fit)
+{
+ int node;
+
+ spl_image.images = fdt_path_offset(fit, FIT_IMAGES_PATH);
+ if (spl_image.images < 0) {
+ debug("%s: Cannot find /images node: %d\n", __func__,
+ spl_image.images);
+ return -1;
+ }
+ node = fdt_first_subnode(fit, spl_image.images);
+ if (node < 0) {
+ debug("%s: Cannot find first image node: %d\n", __func__, node);
+ return -1;
+ }
+
+ /* Get its information and set up the spl_image structure */
+ spl_image.data_offset = fdt_getprop_u32(fit, node, "data-offset");
+ spl_image.data_size = fdt_getprop_u32(fit, node, "data-size");
+ spl_image.load_addr = fdt_getprop_u32(fit, node, "load");
+ debug("data_offset=%x, data_size=%x\n", spl_image.data_offset,
+ spl_image.data_size);
+ spl_image.entry_point = spl_image.load_addr;
+ spl_image.os = IH_OS_U_BOOT;
+
+ return 0;
+}
+
int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
{
int sectors;
ulong size, load;
unsigned long count;
- int node, images;
+ int images, ret;
void *load_ptr;
int fdt_offset, fdt_len;
int data_offset, data_size;
@@ -99,9 +129,8 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
* Figure out where the external images start. This is the base for the
* data-offset properties in each image.
*/
- size = fdt_totalsize(fit);
- size = (size + 3) & ~3;
- base_offset = (size + 3) & ~3;
+ size = get_fit_size(fit);
+ base_offset = size;
/*
* So far we only have one block of data from the FIT. Read the entire
@@ -125,26 +154,13 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
if (count == 0)
return -EIO;
- /* find the firmware image to load */
- images = fdt_path_offset(fit, FIT_IMAGES_PATH);
- if (images < 0) {
- debug("%s: Cannot find /images node: %d\n", __func__, images);
+ ret = spl_parse_fit_header(fit);
+ if (ret < 0)
return -1;
- }
- node = fdt_first_subnode(fit, images);
- if (node < 0) {
- debug("%s: Cannot find first image node: %d\n", __func__, node);
- return -1;
- }
-
- /* Get its information and set up the spl_image structure */
- data_offset = fdt_getprop_u32(fit, node, "data-offset");
- data_size = fdt_getprop_u32(fit, node, "data-size");
- load = fdt_getprop_u32(fit, node, "load");
- debug("data_offset=%x, data_size=%x\n", data_offset, data_size);
- spl_image.load_addr = load;
- spl_image.entry_point = load;
- spl_image.os = IH_OS_U_BOOT;
+ data_offset = spl_image.data_offset;
+ data_size = spl_image.data_size;
+ load = spl_image.load_addr;
+ images = spl_image.images;
/*
* Work out where to place the image. We read it so that the first
@@ -192,3 +208,87 @@ int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fit)
return 0;
}
+
+int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
+ void *fit)
+{
+ ulong size, load;
+ unsigned long count;
+ int images, ret;
+ void *load_ptr;
+ int fdt_offset, fdt_len;
+ int data_offset, data_size, file_offset;
+ int base_offset = 0, align_len;
+ void *dst;
+
+ /*
+ * Figure out where the external images start. This is the base for the
+ * data-offset properties in each image.
+ */
+ size = get_fit_size(fit);
+ base_offset = size;
+
+ /*
+ * Read the entire FIT header, placing it so it finishes before
+ * where we will load the image. Also the load address is aligned
+ * ARCH_DMA_MINALIGN.
+ */
+ align_len = ARCH_DMA_MINALIGN - 1;
+ fit = (void *)((CONFIG_SYS_TEXT_BASE - size - align_len) & ~align_len);
+ debug("FIT header read: destination = 0x%p, size = %lx\n", fit, size);
+ count = info->fs_read(info, filename, fit, 0, size);
+ if (count <= 0)
+ return -EIO;
+
+ ret = spl_parse_fit_header(fit);
+ if (ret < 0)
+ return -1;
+ data_offset = spl_image.data_offset;
+ data_size = spl_image.data_size;
+ load = spl_image.load_addr;
+ images = spl_image.images;
+
+ /*
+ * Work out where to place the image. Assuming load addr of u-boot.bin
+ * is always aligned to ARCH_DMA_MINALIGN. It is possible that file
+ * offset is not aligned. In order to make sure that the file read is
+ * dma aligned, align the file offset to dma with extra bytes in the
+ * beginning. Then do a memcpy of image to dst.
+ */
+ data_offset += base_offset;
+ file_offset = data_offset & ~align_len;
+ load_ptr = (void *)load;
+ dst = load_ptr;
+
+ /* Read the image */
+ debug("Temp u-boot.bin read from fit: dst = 0x%p, file offset = 0x%x, size = 0x%x\n",
+ dst, file_offset, data_size);
+ count = info->fs_read(info, filename, dst, file_offset, data_size);
+ if (count <= 0)
+ return -EIO;
+ debug("u-boot.bin load: dst = 0x%p, size = 0x%x\n", dst, data_size);
+ memcpy(dst, dst + (data_offset & align_len), data_size);
+
+ /* Figure out which device tree the board wants to use */
+ fdt_len = spl_fit_select_fdt(fit, images, &fdt_offset);
+ if (fdt_len < 0)
+ return fdt_len;
+
+ /*
+ * Read the device tree and place it after the image. Making sure that
+ * load addr and file offset are aligned to dma.
+ */
+ dst = (void *)((load + data_size + align_len) & ~align_len);
+ fdt_offset += base_offset;
+ file_offset = fdt_offset & ~align_len;
+ debug("Temp fdt read from fit: dst = 0x%p, file offset = 0x%x, size = %d\n",
+ dst, file_offset, data_size);
+ count = info->fs_read(info, filename, dst, file_offset, data_size);
+ if (count <= 0)
+ return -EIO;
+ debug("fdt load: dst = 0x%p, size = 0x%x\n", load_ptr + data_size,
+ data_size);
+ memcpy(load_ptr + data_size, dst + (fdt_offset & align_len), data_size);
+
+ return 1;
+}
diff --git a/include/spl.h b/include/spl.h
index de4f70a..5f0b0db 100644
--- a/include/spl.h
+++ b/include/spl.h
@@ -27,6 +27,11 @@ struct spl_image_info {
u32 entry_point;
u32 size;
u32 flags;
+#ifdef CONFIG_SPL_LOAD_FIT
+ int data_offset;
+ int data_size;
+ int images;
+#endif
};
/*
@@ -36,6 +41,7 @@ struct spl_image_info {
* @priv: Private data for the device
* @bl_len: Block length for reading in bytes
* @read: Function to call to read from the device
+ * @fs_read: Function to call to read from a fs
*/
struct spl_load_info {
void *dev;
@@ -43,10 +49,35 @@ struct spl_load_info {
int bl_len;
ulong (*read)(struct spl_load_info *load, ulong sector, ulong count,
void *buf);
+ int (*fs_read)(struct spl_load_info *load, const char *filename,
+ void *buf, ulong file_offset, ulong size);
};
+/**
+ * spl_load_simple_fit() - Loads a fit image from a device.
+ * @info: Structure containing the information required to load data.
+ * @sector: Sector number where FIT image is located in the device
+ * @fdt: Pointer to the copied FIT header.
+ *
+ * Reads the FIT image @sector in the device. Loads u-boot image to
+ * specified load address and copies the dtb to end of u-boot image.
+ * Returns 0 on success.
+ */
int spl_load_simple_fit(struct spl_load_info *info, ulong sector, void *fdt);
+/**
+ * spl_fs_load_simple_fit() - Loads a fit image from a file system.
+ * @info: Structure containing the information required to load data.
+ * @filename: Name of the FIT image in the file system.
+ * @fit: Pointer to the copied FIT header.
+ *
+ * Reads the FIT image in the filesystem. Loads u-boot image to
+ * specified load address and copies the dtb to end of u-boot image.
+ * Returns 1 on success.
+ */
+int spl_fs_load_simple_fit(struct spl_load_info *info, const char *filename,
+ void *fit);
+
#define SPL_COPY_PAYLOAD_ONLY 1
extern struct spl_image_info spl_image;
--
2.1.4
More information about the U-Boot
mailing list