[U-Boot] [PATCH 0/8] usb: Move DWC3 and some gadget options to Kconfig

[Lukasz Majewski]

Hi Michal,

> On 7.4.2016 08:43, Lukasz Majewski wrote:
> > Hi Michal,
> > 
> >> On 6.4.2016 15:59, Lukasz Majewski wrote:
> >>> Hi Semen,
> >>>
> >>>>
> >>>> Hi All,
> >>>>
> >>>> This patch series move next options to Kconfigs/defconfigs:
> >>>>  - CONFIG_USB_DWC3*
> >>>>  - CONFIG_USB_GADGET_VBUS_DRAW
> >>>>  - CONFIG_USB_GADGET_DUALSPEED (partially, only for DWC3
> >>>> platforms for now)
> >>>>  - CONFIG_USB_GADGET_DOWNLOAD
> >>>>  - CONFIG_G_DNL_*
> >>>>
> >>>> All defconfig files were post-processed via "make savedefconfig"
> >>>> rule to keep correct order of options in defconfigs.
> >>>>
> >>>> The whole series was tested using buildman tool for all arm
> >>>> boards.
> >>>>
> >>>
> >>> I've reviewed your work and I don't have any objections.
> >>>
> >>> Now, I'm trying to setup python test environment (DFU, UMS), so I
> >>> cannot thoroughly test it.
> >>
> >> test/py?
> > 
> > Yes, indeed.
> > 
> > I've some problems with stdin/stdout operation via
> > u-boot-test-console script with using cu on my Odroid XU3.
> > 
> > I do perform soft reset on my board (by sending "reset") and
> > thereafter it seems like no output from u-boot console is examined
> > by pexpect.
> > 
> > I've asked Stephen for sharing his u-boot-test-console file, so he
> > pointed me towards his github:
> > 
> > https://github.com/swarren/uboot-test-hooks/blob/master/bin/u-boot-test-console
> > 
> > I hope I will solve this problem today :-).
> 
> I am using kermit. I have seen cu too.

With cu I don't see /dev/ttyUSB1 redirected to pexpect.

If I might ask - which USB <-> RS232 converter do you use?

> I am also running qemu but this should be done on real hw.
> 
> Thanks,
> Michal
> 
> 
> 



-- 
Best regards,

Lukasz Majewski

Samsung R&D Institute Poland (SRPOL) | Linux Platform Group