[U-Boot] [uboot] [PATCH v5 7/7] net: phy: dp83867: Add SGMII helper for configuration

[Dan Murphy]

Adding Joe

On 04/11/2016 07:18 AM, Dan Murphy wrote:
> The code assumed that if the interface is not RGMII configured
> then it must be SGMII configured.  This device has the ability
> to support most of the MII interfaces.  Therefore add the
> helper for SGMII and only configure the device if the interface is
> configured for SGMII.
>
> Signed-off-by: Dan Murphy <dmurphy at ti.com>
> ---
>
> v5 - No change
>
>  drivers/net/phy/ti.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/net/phy/ti.c b/drivers/net/phy/ti.c
> index b1f1ec8..f881914 100644
> --- a/drivers/net/phy/ti.c
> +++ b/drivers/net/phy/ti.c
> @@ -219,7 +219,7 @@ static int dp83867_config(struct phy_device *phydev)
>  			(dp83867->fifo_depth << DP83867_PHYCR_FIFO_DEPTH_SHIFT));
>  		if (ret)
>  			goto err_out;
> -	} else {
> +	} else if (phy_interface_is_sgmii(phydev)) {
>  		phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR,
>  			  (BMCR_ANENABLE | BMCR_FULLDPLX | BMCR_SPEED1000));
>  


-- 
------------------
Dan Murphy