[U-Boot] [PATCH 10/10] ddr: altera: Repair DQ window centering code

[Marek Vasut]

The code uses a lot of signed numbers, which ended up in variables
of unsigned type, which resulted in all sorts of underflows. This
in turn caused incorrect calibration on certain boards. Moreover,
repair the readout of the DQ delay, which was being pulled from
wrong register.

Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Dinh Nguyen <dinguyen at opensource.altera.com>
Cc: Chin Liang See <clsee at altera.com>
---
 drivers/ddr/altera/sequencer.c | 15 +++++++--------
 1 file changed, 7 insertions(+), 8 deletions(-)

diff --git a/drivers/ddr/altera/sequencer.c b/drivers/ddr/altera/sequencer.c
index 5ea53ad..6c6bd90 100644
--- a/drivers/ddr/altera/sequencer.c
+++ b/drivers/ddr/altera/sequencer.c
@@ -2316,15 +2316,15 @@ static void center_dq_windows(const int write, int *left_edge, int *right_edge,
 			      const int min_index, const int test_bgn,
 			      int *dq_margin, int *dqs_margin)
 {
-	const u32 delay_max = write ? iocfg->io_out1_delay_max :
+	const s32 delay_max = write ? iocfg->io_out1_delay_max :
 				      iocfg->io_in_delay_max;
-	const u32 per_dqs = write ? rwcfg->mem_dq_per_write_dqs :
+	const s32 per_dqs = write ? rwcfg->mem_dq_per_write_dqs :
 				    rwcfg->mem_dq_per_read_dqs;
-	const u32 delay_off = write ? SCC_MGR_IO_OUT1_DELAY_OFFSET :
+	const s32 delay_off = write ? SCC_MGR_IO_OUT1_DELAY_OFFSET :
 				      SCC_MGR_IO_IN_DELAY_OFFSET;
-	const u32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | delay_off;
+	const s32 addr = SDR_PHYGRP_SCCGRP_ADDRESS | delay_off;
 
-	u32 temp_dq_io_delay1, temp_dq_io_delay2;
+	s32 temp_dq_io_delay1;
 	int shift_dq, i, p;
 
 	/* Initialize data for export structures */
@@ -2342,11 +2342,10 @@ static void center_dq_windows(const int write, int *left_edge, int *right_edge,
 			   "vfifo_center: before: shift_dq[%u]=%d\n",
 			   i, shift_dq);
 
-		temp_dq_io_delay1 = readl(addr + (p << 2));
-		temp_dq_io_delay2 = readl(addr + (i << 2));
+		temp_dq_io_delay1 = readl(addr + (i << 2));
 
 		if (shift_dq + temp_dq_io_delay1 > delay_max)
-			shift_dq = delay_max - temp_dq_io_delay2;
+			shift_dq = delay_max - temp_dq_io_delay1;
 		else if (shift_dq + temp_dq_io_delay1 < 0)
 			shift_dq = -temp_dq_io_delay1;
 
-- 
2.7.0